ページ1に含まれる内容の要旨
For Turf Ranger
Serial Nos. 510,000 & Higher
and
FMD524 & FMD604
Serial Nos. 510,000 & Higher
Part No. 103-9192
ページ2に含まれる内容の要旨
WARNING POTENTIAL HAZARD ♦ This product is a piece of power equipment. WHAT CAN HAPPEN ♦ Failure to follow safe operating practices can result in serious operator injury or even death. HOW TO AVOID THE HAZARD ♦ Keep all shields, guards, and safety devices (especially the grass discharge system) in place and in proper working condition. ♦ Stop engine and wait for all moving parts to stop. Remove spark plug wire(s) or remove key before adjusting, servicing, or performin
ページ3に含まれる内容の要旨
® EXMARK PARTS PLUS PROGRAM EFFECTIVE DATE: September 1, 1995 Program If your Exmark dealer does not have the Exmark part in stock, Exmark will get the parts to the dealer the next business day or the part will be FREE* Guaranteed!! How the Program Works 1. If dealer does not have part in stock for a "down" unit at the time of request by customer, the dealer contacts his distributor by 1:00 p.m., local time, and requests Exmark ® Parts Plus shipment of six (6) line items o
ページ4に含まれる内容の要旨
CONGRATULATIONS on the purchase of your Exmark Mower. This product has been carefully designed and manufactured to give you a maximum amount of dependability and years of trouble-free operation. OPERATOR'S MANUAL This manual contains assembly, operating, maintenance, adjustment, and safety instructions for your Exmark mower. BEFORE OPERATING YOUR MOWER, CAREFULLY READ THIS MANUAL IN ITS ENTIRETY. By following the operating, maintenance, and safety instructions, you will prolo
ページ5に含まれる内容の要旨
TABLE OF CONTENTS 1. SAFETY PAGE 1.1 Safety Alert Symbol...................................................................................... 1 1.2 Training ........................................................................................................ 1 1.3 Preparation................................................................................................ 1-3 1.4 Operation ........................................................................................
ページ6に含まれる内容の要旨
1.SAFETY 1.1 SAFETY ALERT SYMBOL This SAFETY ALERT SYMBOL is used both in this manual and on the machine to identify important safety messages which must be followed to avoid accidents. This symbol means: ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! The safety alert symbol appears above information, which alerts you to unsafe actions or situations and will be followed by the word DANGER, WARNING, or CAUTION. DANGER: White lettering / Red background. Indicates an imminent
ページ7に含まれる内容の要旨
1.3.4 Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks, wires, bones, and other foreign objects, which may damage the equipment or cause personal injury to the operator or bystanders. 1.3.5 Always set the park brake before starting the engine. WARNING POTENTIAL HAZARD ♦ Engine exhaust contains carbon monoxide, which is an odorless deadly poison. WHAT CAN HAPPEN ♦ Carbon monoxide can kill you. HOW TO AVOID THE HAZARD ♦ Do not r
ページ8に含まれる内容の要旨
DANGER POTENTIAL HAZARD ♦ In certain conditions gasoline is extremely flammable and highly explosive. WHAT CAN HAPPEN ♦ A static charge can ignite gasoline vapors. A fire or explosion from gasoline can burn you, others, and cause property damage. HOW TO AVOID THE HAZARD ♦ Purchase and store gasoline only in an approved container. ♦ Always place gasoline containers on the ground away from your vehicle before filling. ♦ Do not fill gasoline containers inside a vehicle or
ページ9に含まれる内容の要旨
1.4 OPERATION Although hazard control and accident prevention are partially dependent upon the design and configuration of the equipment, these factors are also dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment. It is essential that all Operator Safety Mechanisms be connected and in operating condition prior to use for mowing. WARNING POTENTIAL HAZARD ♦ Operating
ページ10に含まれる内容の要旨
DANGER POTENTIAL HAZARD ♦ Mowing on wet grass or steep slopes can cause sliding and loss of control. WHAT CAN HAPPEN ♦ Wheels dropping over edges, ditches, steep banks, or water can cause rollovers, which may result in serious injury, death or drowning. HOW TO AVOID THE HAZARD ♦ Mow up and down slopes. ♦ Do not mow slopes when grass is wet. ♦ Do not mow near drop-offs or near water. ♦ Do not mow slopes greater than 15 degrees. ♦ Reduce speed and use extreme caution on slopes.
ページ11に含まれる内容の要旨
1.4.7 Never operate the mower with defective guards, shields, or covers. Always have safety shields, guards, switches, and other devices in place and in proper working condition. 1.4.8 Do Not change the engine governor settings or overspeed the engine. Operating an engine at excessive speed may increase the hazard of personal injury. 1.4.9 Disengage PTO before starting engine. 1.4.10 Start the engine carefully with feet well away from the blades. 1.4.11 Keep hands, feet, and clot
ページ12に含まれる内容の要旨
1.5 MAINTENANCE AND STORAGE 1.5.1 For engine maintenance, follow the engine manufacturer’s recommendations precisely as stated in the engine manual. 1.5.2 Disconnect the battery cable form the negative battery post when the unit will be allowed to sit for more than 30 days without use. 1.5.3 Allowing batteries to stand for an extended period of time without recharging them will result in reduced performance and service life. To preserve optimum battery performance and life, rech
ページ13に含まれる内容の要旨
1.6 SAFETY SIGNS 1.6.1 Keep all safety signs legible. Remove all grease, dirt, and debris from safety signs and instructional labels. 1.6.2 Safety signs must be replaced if they are missing or illegible. 1.6.3 When new components are installed, be sure that current safety signs are affixed to the replaced components. 1.6.4 New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc. 1.6.5 Safety signs may be affixed b
ページ14に含まれる内容の要旨
PART NO. 98-5954 LOCATION: Under Belt Shields PART NO. 1-403005 LOCATION: LH & RH Front Top Surface of Mower Deck PART NO. 1-543620 LOCATION: On Intake Screen Below Fuel Tank Type A Anti-Scalp Rollers Only – See Figure 7 PART NO. 1-323540 LOCATION: Front of Mower Deck, Top Surface PART NO. 1-543896 PART NO. 103-2248 LOCATION: Und
ページ15に含まれる内容の要旨
2. SPECIFICATIONS 2.1 MODEL NUMBER: TR23KC 2.2 ENGINE 2.2.1 Engine Specifications: See your engine owners manual. 2.2.2 3600 RPM (No Load) 2.3 FUEL SYSTEM 2.3.1 Capacity: 5.0 gal. (18.9 L.) 2.3.2 Type of Fuel: Regular unleaded gasoline 87 octane or higher. In countries using the research method, it should be a 90 octane minimum. 2.3.3 Fuel Filter: Replaceable in-line 2.3.4 Fuel Shut-Off Valve: 1/4 turn 2.4 ELECTRICAL SYSTEM 2.4.1 Charging System: Flywheel alt
ページ16に含まれる内容の要旨
Front Caster 2.8 TIRES Rear Drive (FMD Units) Type Pneumatic Pneumatic Pneumatic Size 18 x 7.50-8 20 x 10.00-8 11 x 4-5 Quantity 1 2 2 Tread Turfsaver Turfmate Smooth Ply Rating 4 4 4 Pressure 14 psi (97 kPa) 20 psi (138 kPa) 16 psi (110 kPa) 2.9 MOWER DECK 2.9.1 Model Numbers: FMD604 and FMD 524 2.9.1 Cutting Width: 60 in. (152.4 cm.) 52 in. (132.1 cm.) 2.9.2 Discharge: Right Side 2.9.3 Optional Mulch Kit and Bagger available. 2.9.4 Blade Size: 60" - (3 ea.)
ページ17に含まれる内容の要旨
3. ASSEMBLY INSTRUCTIONS 3.1 Uncrate tractor and mower deck. 3.2 SERVICE BATTERY: WARNING: Battery posts, terminals, and related accessories contain lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling. The machine is shipped with a filled lead acid battery. 3.2.1 Remove battery cover from machine. DANGER POTENTIAL HAZARD ♦ Charging the battery may produce explosive gasses WHAT CAN HAPPEN ♦ B
ページ18に含まれる内容の要旨
(black) cable to the negative terminal on the battery. Reinstall insulator boots. Reinstall battery cover. NOTE: If time does not permit charging the battery, or if charging equipment is not available, connect the negative battery cables and run the vehicle continuously for 20 to 30 minutes to sufficiently charge the battery. PART NO. 1-513747 LOCATION: Battery Cover 3.3 INSTALL SEAT: Remove seat cushion from seat frame. Remove seat frame from crate and discard
ページ19に含まれる内容の要旨
3.8.2 Remove mower deck support frame from mower deck by removing the two hairpins and spacers from the front deck support pins and remove the hairpins and spacers from the rear deck support pins. 3.8.3 Lift up on support frame until it clears the support pins. Position support frame so the arms are on each side of the tractor engine deck and secure. Secure using eight (8) 3/8-16 x 1 1/4” bolts, disc spring washers, and whizlock nuts. NOTE: Place spring washer cone side again
ページ20に含まれる内容の要旨
Locate two holes along the back center section of the mower deck. Install the stationary idler and related parts in the left hand hole location as shown in Figure 3. See the belt routing decal on deck. Be sure the coned end of the disc spring is against the head of the bolt as illustrated (See Figure 3). 3/8 WHIZLOCK NUT 3/8 HEX CAP SCREW FIGURE 3 IDLER PULLEY KIT AND LOCATION 3.8.7 Install mower deck drive belt. NOTE: Make sure to use proper belt for you
