ページ1に含まれる内容の要旨
Model ZTR 2301 Model ZTR 2301
Model ZTR 2301
Model ZTR 2301 Model ZTR 2301
Please refer to the 3000 Series Manual (Model
Year 2000) for Safety Policy, Seat Adjustment
Instructions, Controls, Operation Instructions,
Care and Maintenance, and Troubleshooting.
1997-2000
Model 2301 Insert
Part No. 6520-1099
Page 1
ページ2に含まれる内容の要旨
DIXON LIMITED WARRANTY POLICY -- MODEL ZTR 2301 This warranty policy applies to all 2301 mowers purchased on or after October 1, 1993. WARRANTY: Dixon Warranty term is for a period of one (1) year from date of purchase or 200 hours of use, whichever occurs first. Mowers used for residential homeowner applications (used only at owner's primary place of residence) are warranted for two (2) years from date of purchase or 200 hours of use, whichever occurs first. DIXON ZTR MOWERS
ページ3に含まれる内容の要旨
SPECIFICATIONS Model ZTR 2301 CHASSIS: Twin 12 gauge side frames and 7 gauge transmission and engine base plate. BODY: All body parts are made of rotational molded polyethylene. Front body contains access panel for battery service. Seat tilts forward to allow transmission service. MOWER DECK: 11 GA stamped steel construction. Single 30" cut blade. Cut height approximately 1" to 4" via 7 position lift handle. BLADE DRIVE: Mechanical; hand lever engagement. TRANSMISSION: Each rear wheel is ind
ページ4に含まれる内容の要旨
SPARE PARTS Model Year 2000 The ZTR 2301 spare/replacement parts will be the same as the ZTR 3304, with the following exceptions: Lower Body (no decals): 6514 Left Fender (no decals): 6515 Right Fender (no decals): 6516 Muffler Guard: 5834 Front Wheel & Tire Assembly: 6513 Rear Wheel & Tire Assembly: 7759 ZTR 2301 Model Decal: 7763 Body Wiring Loom: 6519 Wiring Adapter Loom: 2811 Model 2301 Insert Part No. 6520-1099 Page 4
ページ5に含まれる内容の要旨
2000 Operator's Manual 3000 3000 3000 3000 3000 SERIES SERIES SERIES SERIES SERIES
ページ6に含まれる内容の要旨
IMPORTANT: READ CAREFULLY The Dixon® ZTR® Mower is both easy and fun to operate. However, any power mower must be operated properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower: read the operator's manual carefully, and become completely familiar with the controls. The information in this operator's manual applies to all Dixon® ZTR® 3000 Series Model Mowers. Your Dixon dealer will gladly answer any questions. See your dealer for warranty service, par
ページ7に含まれる内容の要旨
INDEX SAFETY ............................................................Pages 2 - 7 WARRANTY POLICY ......................................Page 8 SPECIFICATIONS ...........................................Page 9 - 11 SEAT ADJUSTMENT ......................................Page 12 CONTROLS .....................................................Pages 13 - 16 OPERATION INSTRUCTIONS......................Pages 17 - 22 CARE AND MAINTENANCE .........................Pag
ページ8に含まれる内容の要旨
SAFETY RIDING LAWNMOWERS, IF IMPROPERLY OPERATED, CAN CAUSE SERIOUS INJURY OR DEATH The most common causes of injury to the operator or bystander... BLADE CONTACT TIP-OVER BACK-OVER RUN-OVER ...read and understand this manual to prevent injuries. Page 8
ページ9に含まれる内容の要旨
SAFETY SAFETY SYMBOLS Safety Alert Symbol When you see this symbol, BE ALERT to the potential for injury. Follow recommended safety precautions and safe operating practices. Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Caution indicates a potentially hazardous situation which, if not avoided, may result in minor o
ページ10に含まれる内容の要旨
SAFETY This cutting mower is capable of amputating hands & feet, and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. GENERAL OPERATION: Read, understand, and follow all instructions in the manual and on the mower before starting. Only allow responsible adults, who are familiar with the instructions, to operate the mower. Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade
ページ11に含まれる内容の要旨
SAFETY SLOPE OPERATION: Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it. DO Mow across the slope with your Dixon ZTR - never up or down. Remove obstacles such as rocks, tree limbs, etc. Watch for holes, ruts or bumps. Uneven terrain could overturn the mower. Tall grass can hide obstacles. Use slow speed. Tires ma
ページ12に含まれる内容の要旨
SAFETY CHILDREN: Tragic accidents can occur if the operator is not alert to the presence of children. Children are attracted to lawn mowers and the mowing activity. NEVER assume children will stay where they were last seen. Be alert to avoid accidents. Keep children out of the mowing area and under the watchful care of another responsible adult. Be alert and turn mower off if a child enters the area. Before and during backing, look behind and DOWN for small children. Never carry
ページ13に含まれる内容の要旨
SAFETY SERVICE: Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. Use only an approved container. Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke. Never refuel the mower indoors. Never store the mower or fuel container inside a building where there is an open flame. Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on
ページ14に含まれる内容の要旨
DIXON PROTECTION PLUS TWO YEAR LIMITED WARRANTY POLICY This warranty policy applies to all (30"), (36"), (42") mowers purchased on or after March 1, 1990. WARRANTY: The Dixon Protection Plus Warranty term is for a period of two (2 ) years from date of purchase. DIXON ZTR MOWERS ARE WARRANTED AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP AND PROVIDES FOR REPLACEMENT OR REPAIR OF PARTS INCLUDING LABOR COSTS. THIS WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS AND LIMITATIONS: 1. Warr
ページ15に含まれる内容の要旨
SPECIFICATIONS Model ZTR 3303 CHASSIS: Twin 12 gauge side frames and 7 gauge transmission and engine base plate. BODY: All body parts are made of rotational molded polyethylene. Front body contains access panel for battery service. Seat tilts forward to allow transmission service. MOWER DECK: 11 GA stamped steel construction. Single 30" cut blade. Cut height approximately 1" to 4" via 7 position lift handle. BLADE DRIVE: Mechanical; hand lever engagement. TRANSMISSION: Each rear wheel is inde
ページ16に含まれる内容の要旨
SPECIFICATIONS Model ZTR 3304 CHASSIS: Twin 12 gauge side frames and 7 gauge transmission and engine base plate. BODY: All body parts are made of rotational molded polyethylene. Front body contains access panel for battery service. Seat tilts forward to allow transmission service. MOWER DECK: 11 GA stamped steel construction. Single 30" cut blade. Cut height approximately 1" to 4" via 7 position lift handle. BLADE DRIVE: Mechanical; hand lever engagement. TRANSMISSION: Each rear wheel is ind
ページ17に含まれる内容の要旨
SPECIFICATIONS Model ZTR 3014 CHASSIS: Twin 12 gauge side frames and 7 gauge transmission and engine base plate. BODY: All body parts are made of rotational molded polyethylene. Front body contains access panel for battery service. Seat tilts forward to allow transmission service. MOWER DECKS: 36" Deck: 11 GA Laser Cut Fabricated - 36" Cut Width 42" Deck: 13 GA Stamped Steel Construction - 42" Cut Width Cut height approximately 1" to 4" via 7 position lift handle. BLADE DRIVE: Electric
ページ18に含まれる内容の要旨
SEAT ADJUSTMENT INSTRUCTIONS Models ZTR 3303 - ZTR 3304 - ZTR 3014 1. Raise and push seat assembly forward. 2. Loosen five nuts, P/N 3205, and slide seat forward or backward to desired position. 3. Re-tighten nuts, P/N 3205. DO NOT operate mower without seat adjustments properly tightened. 4. Push seat assembly back to closed position. Page 18
ページ19に含まれる内容の要旨
CONTROLS Page 19
ページ20に含まれる内容の要旨
CONTROLS The Dixon ZTR has a unique transaxle that requires only two drive levers to control braking, turning, speed, and direction. On initial operation, set throttle speed on slow. Operate with mower blade "OFF". To avoid "over-controlling" the mower, use a light touch on the drive levers. Slight movements using fingertip control is all that is necessary. PARKING BRAKE: The parking brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is i
