ページ1に含まれる内容の要旨
Operator and
Parts Manual
Grass Bagger
Dixon SpeedZTR 44"
Kit 539 131301
ページ2に含まれる内容の要旨
CONGRATULATIONS on your purchase of a KNOW YOUR GRASS BAGGER new Grass Bagger. It has been designed, engi- READ THIS OPERATION MANUAL AND THE neered and manufactured to give you the best SAFETY RULES BEFORE ASSEMBLING OR possible dependability and performance. OPERATING YOUR GRASS BAGGER. Com- Should you experience any problem you cannot pare the illustrations with the carton contents to easily remedy, please contact your nearest familiarize yourself with the parts before starting authorized ser
ページ3に含まれる内容の要旨
TABLE OF CONTENTS SAFETY RULES ....................................................................................................................... 4-6 CARTON CONTENTS ..................................................................................................................7 ASSEMBLY .......................................................................................................................... 8 - 10 OPERATION ...............................................................
ページ4に含まれる内容の要旨
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS DANGER ! THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Read, understand and follow all instructions operators should evaluate their ability to in the manual and on the machine before operate the riding mower safely enough to starting. protect themselves and others from serious • Only allo
ページ5に含まれる内容の要旨
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS • Use extra care in handling gasoline and other DO NOT fuels. They are flammable and vapors are • Do not turn on slopes unless necessary, and explosive. then, turn slowly and gradually downhill, if - Use only an approved container. possible. - Never remove gas cap or add fuel with • Do not mow near drop-off, ditches, or em- the engine running. bankments. The mower could suddenly turn over if a wheel is over the edge of a cliff - Allow engi
ページ6に含まれる内容の要旨
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS • NEVER allow children to operate the machine. CAUTION • Be sure the area is clear of other people In order to prevent accidental starting when before mowing. Stop machine if anyone setting up, transporting, adjusting or making enters the area. repairs, always disconnect spark plug wire and • Never carry passengers or children even with place wire where it cannot contact spark plug. the blades off. • Do not drive in reverse unless absolute
ページ7に含まれる内容の要旨
UNPACKING INSTRUCTIONS CARTON 1 CONTENTS • Remove all parts and packing materials from 1 - Upper Chute 1 - Owner’s Manual both cartons. 1 - Flex Hose 1 - Hanger Bracket 1 - Bagger Support 1 - Weight Kit • Check carton contents against list. Be sure all parts are there. 1 - Bag of Hardware CARTON 2 CONTENTS 1 - Cover Assembly 2 - Soft Bag Containers 1 - Bag of Hardware PARTS IDENTIFICATION COVER ASSEMBLY FLEX HOSE GRASS CATCHER CONTAINERS NOTE: When right hand (R.H.) and left hand (L.H.) are ment
ページ8に含まれる内容の要旨
ASSEMBLY BAGGER SUPPORT ASSEMBLY MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY 1 2 1. Remove the side bolts on the engine guard. NOTE: For ease of assembly, you may wish 2. Using bagger support as a template, drill one assistance from another person for mounting the 11 /32 hole into the engine guard at the center cover assembly to mower. bottom. (See illustration) Attach bagger 1. Position cover assembly on ground behind support to engine guard using with four mower. 3 3 /8 -16 x ¾ bolts and four
ページ9に含まれる内容の要旨
ASSEMBLY CONTAINER MOUNTING UPPER CHUTE 3 4 1. Attached flex tube to blower and secure with 1. Install container, centering between support the hose clamp. tubes. 2. Slide opposite flex hose end into upper chute. NOTE: One container should always overlap the other container at supports. 3. Push upper chute through the gasketed opening in the cover assembly. 2. Close cover and lock latch handles over center support tubes. 4. Rotate flex tube and upper chute so that the chute opening is downwards
ページ10に含まれる内容の要旨
ASSEMBLY FRONT WEIGHTS 5 1. Center the weight box on the front face of foot plate, as illustrated. Use the holes in weight 11 box as a template to mark and drill four /32" diameter holes in foot plate. 2. Attach the weight box to foot plate with four 5 5 /16-18 x ½" carriage bolts and /16" nyloc nuts. 3. Install weight in weight box. CAUTION DO NOT operate mower with grass bagger, unless the front weights are installed. Weight Box Install Weight In Box 10
ページ11に含まれる内容の要旨
OPERATION TIPS FOR IMPROVED BAGGING • Avoid cutting wet grass or in the morning OPERATION while the dew is still heavy. Grass clippings collected under these conditions tend to be Follow the mower operation instructions in your sticky and adhere to the walls of the flow path mower operator’s manual. causing clogging. When operating your grass bagger on a lawn • If the grass bagger fails to pick up cut grass or where grass and leaf bagging equipment has not leaves, it is an indication that cloggi
ページ12に含まれる内容の要旨
CUSTOMER RESPONSIBILITIES GENERAL RECOMMENDATIONS STORAGE Always observe safety rules when performing any When grass bagger is to be stored for a period of maintenance. time, clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place. • Before each use check for loose fasteners. • Clean unit thoroughly after each use. BLADE CARE For best results mower blades must be kept sharp. Replace bent or damaged blades. • See BLADE CARE instructions in your mower CAUTION operator
ページ13に含まれる内容の要旨
PARTS 8 2 9 11 4 9 9 9 10 7 8 5 8 6 3 14 1 12 13 15 ITEM P/N QTY. DESCRIPTION ITEM P/N QTY. DESCRIPTION 5 1 .. 532 124670 .... 1... RETAINER SPRING 9 .. 539 991034 .... 8 ... 10-24 x /8 WASHER HD ZD 2 .. 532 127533 .... 1 ... SCREEN, COVER 10 .. 532 414173 .... 1... STRIP, REINFORCEMENT 3 .. 539 108100 .... 1 ... GASKET, COVER 11 .. 532 160274 .... 1 ... COVER TOP 4 .. 532 130895 .... 1... LATCH. HANDLE, COVER 12 .. 532 174083 .... 3 ... CAP PLUG TUBING END 5 .. 532 132796 .... 1... SPRING COVER
ページ14に含まれる内容の要旨
PARTS 6 2 11 12 5 5 17 10 1 3 5 6 8 13 14 6 12 7 9 ITEM P/N QTY. DESCRIPTION ITEM P/N QTY. DESCRIPTION 1 .. 539 131279 .... 1 ... SUPPORT - BAGGER 9 .. 539 115719 .... 1... HOSE CLAMP 3 2 .. 539 990134 .... 4 ... HCS / -16 x ¾ GR 5 ZD 10 .. 539 131282.... 1... SUPPORT STRAP - L.H. 8 3 3 .. 539 976979 .... 4 ... NUT / -16 HEX NYLOC ZD 11 .. 539 131284.... 1... SUPPORT STRAP - R.H. 8 4 .. 539 131277 .... 1 ... BRACKET, HANGER 12 .. 539 111587 .... 1... CAST WEIGHT 5 5 .. 539 990208 .... 6 ... RRSN
ページ15に含まれる内容の要旨
539 131347 IR 05/07
