ページ1に含まれる内容の要旨
Operator's Manual
CRAFTSMAN °
LAW TRACTOR
24.0 HR* 42" Mower
Electric Start
Automatic Transmission
Model No.
917.28936
, EspaSoI, p. 32
]
This product has a low emission engine which operates
differently from previously built engines. Before you start the
engine, read and understand this Owner's Manual.
1
iMPORTANT:
For answers to your questions
about this product, Call:
Read and follow all Safety
1-800 -659-5917
Rules and instructions before
Sears Craftsman Help Line
operating this equipment.
5
ページ2に含まれる内容の要旨
Maintenance ........................................ 16 Warranty ................................................ 2 Safety Rules .......................................... 3 Service and Adjustments ..................... 21 Product Specifications ........................... 6 Storage ................................................ 27 Assembty/Pre-Operation ....................... 7 Troubleshooting ................................... 28 Sears Service ........................ Back Cover Operation
ページ3に含まれる内容の要旨
_I_,DANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. _WARNING: In order to prevent acciden- Never direct discharged material toward anyone. Avoid discharging material tal starting when setting up, transporting, adjusting or making repairs, always discon- against a wall or obstruction. Material nect spark plug wire and place wire where may ricochet back toward th
ページ4に含まれる内容の要旨
II.SLOPE OPERATION Never carry children, even with the blades shut off. They may fall off and Slopes areamajor factor related tolossof be seriously injured or interfere with safe control andtip-over accidents, which can machine operation. Children who have result insevere injury ordeath. Operation been given rides in the past may suddenly onallslopes requires extra caution. If you appear in the mowing area for another cannot back upthe slope or ifyou feet uneasy ride and be run over or backed ov
ページ5に含まれる内容の要旨
Keep thenozzle incontact withtherim Ifyoustrike aforeign object, stopand ofthefueltankorcontainer opening at inspectthe machine. Repair, ifnecessary, alltimes until fueling iscomplete. Donot before restarting. useanozzle lock-open device. Never make anyadjustments orrepairs Iffuel isspilled onclothing, change cloth- withtheengine running. ingimmediately. Check grass catcher components and the Never overfill fuel tank. Replace gas cap discharge chute frequently andreplace andtighten securely. wit
ページ6に含まれる内容の要旨
PRODUCT SPECIFiCATiONS REPAIR PROTECTION AGREEMENTS Gasoline Capacity 3 Gallons Congratulations on making a smart purchase. and Type: Unleaded Regular Your new Craftsman@ product is designed Oil Type SAE 30 (above 32°F) and manufactured for years of dependable API-SG-SL): SAE 5W30 (below 32°F operation. But like all products, it may require repair from time to time. That's when having Oil Capacity: W/Filter: 64 oz. W/O Filter: 60 oz. a Repair Protection Agreement can save you money and aggravati
ページ7に含まれる内容の要旨
Slope Sheet Keys (1) Oil Drain Tube For Future Use (2/Keys Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly Label easier. Standard wrench sizes are listed. (1) 1/2" wrench Tire p
ページ8に含まれる内容の要旨
NOTE: Youmaynowrollyourtractor off _J'CHECKLIST theskid.Follow theappropriate instruction below toremove thetractor from theskid. Before youoperate your new tractor, we wish to ensure that you receivethe best performance _WARNING:Beforestarting,read, and satisfaction from this Quality Product. understand and follow allinstructions inthe Please review the following checklist: Operation section of this manual. Be sure JAil assembly instructions have been tractor is in a well-ventilated area. Be su
ページ9に含まれる内容の要旨
These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. R N H I'.,I G REVERSE NEUTRAL HIGH LOW CHOKE FAST SLOW IGNITION SWITCH MOWER LIFT ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT OPERATION SYSTEM (ROS) CLUTCH/BRAKE CRUISE CONTROL LIGHTS ON FUEL BATTERY REVERSE FORWARD PEDAL m ®@@@@ ATTACHMENT ATTACHMENT DANGER, KEEP HANDS KEEP AREA CLEAR SLOPE HAZARDS CLUTCH DISENGAGED CLUTCH ENGAGED AND FEET AWAY (SEE S
ページ10に含まれる内容の要旨
KNOW YOUR TRACTOR READ THiS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. 03078 Our tractors conform to the applicable safety standards of the American National Standards Institute. (G) REVERSE OPERATION SYSTEM (A) ATTACHMENT LiFT LEVER - Used to raise and lower the mower or other attach- (ROS) "ON" POSiTiON - Allows op
ページ11に含まれる内容の要旨
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles. HOW TO USE YOUR TRACTOR Move motion control lever (J) to neutral TO SET PARKING BRAKE position. Your tractor is equipped with an operator presence sensing switch. When engine is r
ページ12に含まれる内容の要旨
TO MOVE FORWARD AND TO ADJUST GAUGE WHEELS BACKWARD Gauge wheels are properly adjusted when they are slightly offthe ground when mower The direction and speed of movement is is at the desired cutting height in operating controlled by the motion control lever. (J) position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. NOTE: Adjust gauge wheels with tractor on a flat level surface. 1. Adjust mower to desired cutting height (See "TO ADJUST
ページ13に含まれる内容の要旨
REVERSE OPERATION SYSTEM (ROS) • To restart movement, slowly release park- ing brake and clutch/brake pedal. Your tractor is equipped with a Reverse • Slowly move motion control lever to slow- Operation System (ROS). Any attempt by est setting. the operator to travel inthe reverse direction • Make all turns slowly. with the attachment clutch engaged will shut off the engine unless ignition key is placed TO TRANSPORT inthe ROS "ON" position. When pushing or towing your tractor, be ,_L,WARNING: Ba
ページ14に含まれる内容の要旨
3. Place motion control lever in neutral BEFORE STARTING THE ENGINE position. CHECK ENGINE OIL LEVEL 4. Move attachment clutch to disengaged The engine in your tractor has been shipped, position. from the factory, already filled with summer 5. Move throttle control to choke position. weight oil. NOTE: Before starting, read the warm and 1. Check engine oil with tractor on level cold starting procedures below. ground. 6. Insert key into ignition and turn key 2. Remove oil fill cap/dipstick and wip
ページ15に含まれる内容の要旨
PURGE TRANSMiSSiON MOWING TIPS • Tire chains cannot be used when the _CAUTION: Never engage or disengage mower housing is attached to tractor. freewheel lever while the engine is running. Mower should be properly leveled for best To ensure proper operation and performance, mowing performance. See "TO LEVEL it is recommended that the transmission be MOWER HOUSING" in the Service and purged before operating tractor for the first Adjustments section of this manual. The left hand side of mower shoul
ページ16に含まれる内容の要旨
BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE 25 50 100 SEASON STORAGE EACH 8 SCHEDULE USE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure T Check Operator Presence & ROS Systems l/ v" A Check for Loose Fasteners C Check/Replace Mower Blades | Lubrication Chart v' v' 0 Check Battery Level a Clean Battery and Terminals _/ v' Clean Debris Off Steering Plate Check Mower Levelness Check V-Belts m Check Engine Oil Level _ if Chanqe Engine Oil (with oil filter) Change Engin
ページ17に含まれる内容の要旨
TRACTOR CHECK REVERSE OPERATION (ROS) SYSTEM Always observe safety rules when performing any maintenance. When the engine is running with the ignition BRAKE OPERATION switch in the engine "ON" position and the attachment clutch engaged, any attempt If tractor requires more than five (5) feet to by the operator to drive in reverse should stop at highest speed in highest gear on a shut off the engine. level, dry concrete or paved surface, then When the engine is running with the ignition brake mus
ページ18に含まれる内容の要旨
BATTERY ENGINE Your tractor has a battery charging system LU BRICATION which is sufficient for normal use. However, Only use high quality detergent oil rated periodic charging of the battery with an au- with API service classification SG-SL. tomotive charger wilt extend its life. Select the oil's SAE viscosity grade Keep battery and terminals clean. according to your expected operating Keep battery bolts tight. temperature. Keep small vent holes open. Recharge at 6-10 amperes for 1 hour. NOTE: T
ページ19に含まれる内容の要旨
IN=LINE FUEL FILTER 5. Re-attach oil drain extension to engine blower housing. The fuel filter should be replaced once each season. If fuel filter becomes clogged, ob- 6. Refill enginewith oilthrough oilfill dipstick structing fuel flow to carburetor, replacement tube. Pour slowly. Do not overfill. For ap- is required. proximate capacity see "PRODUCT SP- 1. With engine coot, remove filter and plug ECIFICATIONS" section of this manual. fuel line sections. 7. Use gauge on oil fill cap/dipstick for
ページ20に含まれる内容の要旨
DECK WASHOUT PORT 9. Pull back the lock collar of the nozzle adapter to disconnect the adapter from Your tractor's deck is equipped with a the nozzle washout port. washout port on its surface as part of its 10. Move the tractor to a dry area, prefer- deck wash system. It should be utilized af- ter each use. ably a concrete or paved area. Place the attachment clutch control in the 1. Drive the tractor to a level, clear spot "Engaged" position to remove excess on your lawn, near enough to a water
