ページ1に含まれる内容の要旨
Operator's Manual
Zero Turn Riding Mower
26HP B&S Engine / Side Discharge / 52-inch Wide
Model 127.28875
· Español, p. 37
For answers to your questions
CAUTION: Before using this product,
about this product call:
read the manual and follow all its Safety
1-800-659-5917
Sears Craftsman Help Line
Rules and Operating Instructions
5am - 5pm, Mon - Sat
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A
Visit the Craftsman website: www.sears.com/craftsman
PARTS MANUAL 4163201
MAN 4163202 Rev
ページ2に含まれる内容の要旨
CALIFORNIA WARNING Proposition 65 Warning The engine exhaust from this product Diesel engine exhaust and some contains chemicals known to the State of its constituents are known to the of California to cause cancer, birth State of California to cause cancer, birth defects and other reproductive defects or other reproductive harm. harm. Californie Proposition 65 Avertissement Avertissement Les échappements des moteurs diesel et certains de leurs composés sont reconnus par l’Etat de L’émis
ページ3に含まれる内容の要旨
TABLE OF CONTENTS PAGE SAFETY .........................................................................................................................................................2-8 LABELS .......................................................................................................................................................9-13 CONTROLS .............................................................................................................................................
ページ4に含まれる内容の要旨
SAFETY NOTICE !!! This symbol means: ATTENTION! Unauthorized modifications may present extreme safety hazards to operators and bystanders and BECOME ALERT! could also result in product damage. Your safety and the safety of others is involved. Craftsman Professionalstrongly warns against, rejects and disclaims any modifications, add-on Signal word definitions: accessories or product alterations that are not The signal words below are used to identify levels designed, developed, teste
ページ5に含まれる内容の要旨
SAFETY PREPARING FOR SAFE OPERATION Operator preparation and training WARNING Read the Operation & Safety Manual - If an operator or mechanic cannot read English, it is the owner's responsibility to explain this material to them. If any portion of this material is unclear, contact your factory representative for clarification. All rotary lawnmowers are potentially - Become familiar with the safe operation of the dangerous. They can amputate hands and equipment, operator controls a
ページ6に含まれる内容の要旨
SAFETY OPERATING SAFELY Machine preparation - Check operator presence interlock system and In general brake operation. Adjust or repair any problems - Use extra care when loading or unloading the before using. machine into a trailer or truck. - Do not tamper with or defeat safety devices. - Slow down and use caution when making turns Keep guards, shields and interlock safety devices and crossing roads and sidewalks. Stop blades if in place and in proper working condition. They not mo
ページ7に含まれる内容の要旨
SAFETY Starting Interrupting operation - Start only according to instructions in this manual - Before leaving the operator's position: or on the machine. - Park on level ground. - Disengage the PTO. - Before attempting to start the engine, make sure: - Set the parking brake. - the parking brake is on; - Shut off the engine and remove the key. - the PTO is disengaged; - the traction drive is in NEUTRAL. - Disengage the PTO and wait until the blades quit rotating: - When starting the eng
ページ8に含まれる内容の要旨
SAFETY MANEUVERING SAFELY In general gradual. Do not make sudden changes in speed - Slow down before turning. or direction. - Do not mow in reverse unless absolutely - Do not turn on slopes unless necessary, and then necessary. Always look behind and down turn slowly and downhill when possible. for small children and pets before and during - Stay away from slopes if the ground is loose or if backing. caught in the rain during mowing. - Be aware when approaching blind corners, - Use lowe
ページ9に含まれる内容の要旨
SAFETY MAINTENANCE SAFETY WARNING In general Blades - Maintain machine according to manufacturer's - Mower blades are sharp and schedule and instructions for maximum safety can cut. Use extra caution and best mowing results. when handling. Remove ob- - Park machine on level ground. structions with care. Wrap the blade(s) or wear gloves. - Never allow untrained personnel to service ma- chine. - Be aware that rotating one blade on multi-blade mowers can cause other - Adjust or repa
ページ10に含まれる内容の要旨
SAFETY JUMP STARTING BATTERY WARNING 1. Be sure the jumper cables are in good condition. Battery acid is caustic and fumes Turn off the ignition and all electrical accessories are explosive and can cause on both machines. serious injury or death. 2. Position the machine with a good (charged) bat- To reduce the risk of personal tery next to but not touching the machine with the injury when working near a bat- dead battery so jumper cables will reach. tery: 3. When making cable connectio
ページ11に含まれる内容の要旨
LABELS 9
ページ12に含まれる内容の要旨
LABELS 10
ページ13に含まれる内容の要旨
LABELS 11
ページ14に含まれる内容の要旨
LABELS 12
ページ15に含まれる内容の要旨
LABELS 13
ページ16に含まれる内容の要旨
CONTROLS KEYSWITCH (K) - The keyswitch has three positions: OFF, RUN, and START. Insert the key and turn it clockwise to move the switch from OFF to RUN. Turn it further to START and hold to engage the starter. Release the key and the switch will return to RUN from START. Turn the key counterclockwise to OFF to stop the engine. THROTTLE (T) - Move the throttle lever forward to increase engine speed until the maximum governed engine RPM is reached. Move the lever rearward to decrea
ページ17に含まれる内容の要旨
CONTROLS FUEL SELECTOR VALVE (U) The fuel tank selector valve is located behind the seat. The fuel tank selector valve has three positions: Off: The tank selector is off when the lever points down. The selector should be off whenever the machine is transported or stands unused for any length of time. Shutting off the fuel supply avoids the possibility of flooding should any dirt get under the carburetor float needle. Leaving the tank selector in either tank position can allow severe
ページ18に含まれる内容の要旨
CONTROLS Reverse movement - To move the machine straight back, pull both traction levers back equally from their neutral position. Reverse speed increases as the levers are moved back farther. Maximum reverse speed is reached when the levers hit the rear of the forward-reverse slot. When moving in reverse, push- ing the levers forward slows the machine, and the machine stops when the neutral position is reached. NOTE: Reverse is spring loaded to return to neutral. This spring resis
ページ19に含まれる内容の要旨
CONTROLS PARKING BRAKE (R) - Pull the parking brake lever up and back to put the parking brake ON. Push it forward and down to put the parking brake OFF. The parking brake must be ON to start the engine. It must also be ON to keep the engine running if the operator leaves the seat. The parking brake must be OFF to keep the engine running when a traction lever is moved out of neutral lock. Parking brake in ON position (operator's left side) PUSHING THE MACHINE The machine may be pushe
ページ20に含まれる内容の要旨
PRE-OPERATION CHECK LIST PRE-OPERATION CHECK LIST (OPERATOR’S RESPONSIBILITY) ___ Review and follow all safety rules and safety ___ Never allow riders. decal instructions. ___ Inspect area and remove stones, branches or ___ Check that all safety decals are installed and in other hard objects that might be thrown, good condition. Replace if damaged. causing injury or damage. ___ Check to make sure all shields and guards ___ Clean area around oil fill dipstick. Remove are properly ins
