ページ1に含まれる内容の要旨
Pressure Washer
Operator’s Manual
This pressure washer is rated in accordance to the Pressure Washer Manufacture Association
(PWMA) standard PW101 (Testing and Rating Performance of Pressure Washers).
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC
JEFFERSON, WISCONSIN, U.S.A.
Manual No. 205334GS Revision A (04/15/2008)
ページ2に含まれる内容の要旨
Thank you for purchasing this quality-built Briggs & Stratton pressure washer. We are pleased that you’ve placed your confidence in the Briggs & Stratton brand. When operated and maintained according to the instructions in this manual, your Briggs & Stratton pressure washer will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with pressure washers and how to avoid them. Because Briggs & Stratton does not nece
ページ3に含まれる内容の要旨
Table of Contents Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Equipment Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Unpack Pressure Washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Safety Rules Operator Safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all Equipment Description safety messages that follow this symbol to avoid Read this manual carefully and become familiar possible injury or death. with your pressure washer. Know its applications, The safety alert symbol ( ) is used with a signal word its limitations, and any hazards involved. (DANGER, CAUTION, WARNING), a pictorial and/or a safety This pressure washe
ページ5に含まれる内容の要旨
WARNING WARNING The engine exhaust from this product contains chemicals Fuel and its vapors are extremely flammable and known to the State of California to cause cancer, birth explosive. defects, or other reproductive harm. Fire or explosion can cause severe burns or death. WARNING Certain components in this product and related WHEN ADDING OR DRAINING FUEL accessories contain chemicals known to the State of • Turn pressure washer OFF and let it cool at least 2 minutes California to cause cancer,
ページ6に含まれる内容の要旨
WARNING WARNING Starter cord kickback (rapid retraction) can result The high pressure stream of water that this in bodily injury. Kickback will pull hand and arm equipment produces can cut through skin and its toward engine faster than you can let go. underlying tissues, leading to serious injury and possible amputation. Broken bones, fractures, bruises, or sprains could result. Spray gun traps high water pressure, even when engine is stopped and water is disconnected, • NEVER pull starter cord
ページ7に含まれる内容の要旨
WARNING NOTICE High pressure spray may damage fragile items including Starter and other rotating parts can entangle glass. hands, hair, clothing, or accessories. • DO NOT point spray gun at glass when using red 0° nozzle. • NEVER aim spray gun at plants. • NEVER operate pressure washer without protective housing or covers. • DO NOT wear loose clothing, jewelry or anything that may be NOTICE caught in the starter or other rotating parts. Improper treatment of pressure washer can damage it and • T
ページ8に含まれる内容の要旨
Attach Handle, Cleaning Tanks and Accessory Assembly Tray Read entire operator’s manual before you attempt 1. Place handle (A) onto handle supports (B) connected to to assemble or operate your new pressure washer. main unit. Make sure holes (C) in handle align with Your pressure washer requires some assembly and is ready holes (C) on handle supports. for use after it has been properly serviced with the recommended oil and fuel. A If you have any problems with the assembly of your pressure washer
ページ9に含まれる内容の要旨
6. Insert “L” bolt (A) through hole just below accessory NOTICE tray on right side of handle (viewing from front of unit). Avoid pressure washer damage. Hold bolt in place and attach plastic knob (B) from inside of unit. Tighten by hand. Failure to follow Operator’s Manual for fuel recommendations voids warranty. • DO NOT use unapproved gasoline such as E85. • DO NOT mix oil in gasoline. • DO NOT modify engine to run on alternate fuels. To protect the fuel system from gum formation, mix in a fue
ページ10に含まれる内容の要旨
5. Connect the garden hose (not to exceed 50 feet (15 m) Connect Hose and Water Supply to Pump in length) to the water inlet. Tighten by hand. NOTICE NOTICE DO NOT run the pump without the water supply connected and turned on. Damage to pump or water inlet connector will occur if a One Way Valve (vacuum breaker or check valve) is • Damage to equipment resulting from failure to follow this connected to pump. instruction will void warranty. • There MUST be at least ten feet (3M) of unrestricted ga
ページ11に含まれる内容の要旨
Features and Controls Read this Operator’s Manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. A M B N L J K , , C P R , S D E T F U G V H ® A- Project Pro Nozzles — Detergent, Max., General and L - Throttle Lever — Sets engine in starting mode for recoil Delicate: for various high pressure cleaning applications. st
ページ12に含まれる内容の要旨
How to Start Your Pressure Washer Operation To start your pressure washer for the first time, follow these If you have any problems operating your pressure washer, instructions step-by-step. This starting information also please call the pressure washer helpline at (800) 743-4115. applies if you have let the pressure washer sit idle for at least a day. Pressure Washer Location 1. Place pressure washer near an outside water source Clearances and Air Movement capable of supplying water at a flow r
ページ13に含まれる内容の要旨
9. Move throttle control lever (A) to “High” position, WARNING shown on engine as a rabbit . Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm A toward engine faster than you can let go. Broken bones, fractures, bruises, or sprains could result. • NEVER pull starter cord without first relieving spray gun pressure. • When starting engine, pull cord slowly until resistance is felt and 10. Move choke lever to “Choke” position. then pull rapidly to
ページ14に含まれる内容の要旨
® How to Use ProjectPro Nozzle System WARNING The quick–connect on the nozzle extension allows you to ® switch between four different ProjectPro system nozzles. Contact with muffler area can result in serious ® ProjectPro nozzles can be changed while pressure washer burns. is running once spray gun trigger lock is engaged. The Exhaust heat/gases can ignite combustibles, ® ProjectPro nozzles vary the pressure and spray pattern as structures or damage fuel tank causing a fire. shown. • DO NOT touc
ページ15に含まれる内容の要旨
® 2. Select desired ProjectPro nozzle: • To apply detergent, apply project specific cleaners to help break down stubborn dirt and grime on a • For delicate rinse (lower pressure and higher flow), ® variety of surfaces, select black ProjectPro for gentle cleaning of cars/trucks, boats, RV’s, patio furniture, lawn equipment, etc., select yellow cleaning detergent nozzle. ® Delicate ProjectPro nozzle. ® • For general rinsing (medium pressure and medium 3. Pull back on collar, insert new ProjectPro
ページ16に含まれる内容の要旨
5. Make sure black detergent nozzle is installed. Pressure Washer Rinsing NOTE: Detergent cannot be applied with the high pressure For Rinsing: ® ProjectPro nozzle (Orange, Yellow or Red) or optional turbo 1. Make sure both detergent shut-off valves are in the nozzle. “Off” position. 6. Make sure garden hose is connected to water inlet. 2. Remove black detergent nozzle from nozzle extension. Check that high pressure hose is connected to spray gun and pump. Turn on water. 3. Select and install de
ページ17に含まれる内容の要旨
NOTE: Once a year you should clean or replace the spark Maintenance plug, clean or replace the air filter, and check the spray gun and nozzle extension assembly for wear. A new spark plug Maintenance Schedule and clean air filter assure proper fuel-air mixture and help Follow the hourly or calendar intervals, whichever occurs your engine run better and last longer. first. More frequent service is required when operating in adverse conditions noted below. Pump Oil DO NOT attempt any oil maintenan
ページ18に含まれる内容の要旨
Check High Pressure Hose 3. Remove nozzle from end of nozzle extension. The high pressure hose can develop leaks from wear, 4. Use a small paper clip to free any foreign material kinking, or abuse. Inspect the hose each time before using it. clogging or restricting nozzle (A). Check for cuts, leaks, abrasions or bulging of cover, damage or movement of couplings. If any of these conditions exist, replace the hose immediately. WARNING A The high pressure stream of water that this equipment produce
ページ19に含まれる内容の要旨
Checking Oil Level Engine Maintenance Oil level should be checked prior to each use or at least WARNING every 8 hours of operation. Keep oil level maintained. 1. Make sure pressure washer is on a level surface. 2. Clean area around oil fill and remove oil fill cap. Unintentional sparking can result in fire or 3. Verify oil is at the point of overflowing at oil fill electric shock. opening. 4. Replace and tighten oil fill cap. WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER Adding Engine
ページ20に含まれる内容の要旨
6. Slowly pour oil (about 20 oz.) into oil fill opening (B) to Spark Arrester Service the point of overflowing (C) at oil fill cap. Your engine is not factory-equipped with a spark arrester. In 7. Reinstall oil fill cap. Finger tighten cap securely. some areas, it is illegal to operate an engine without a spark arrester. Check local laws and regulations. A spark arrester is 8. Wipe up any spilled oil. available from your nearest qualified service center.The spark Service Air Cleaner arrester mus
