WiebeTech NBDDV4の取扱説明書

ページ1に含まれる内容の要旨

Notebook DriveDock™ v4
USER’S MANUAL
Revised May 21, 2007


Features

• Dual, daisy-chainable FireWire ports
• USB 2.0 mini port
• Bus powered through FireWire, plus two options for
external power
• LEDs show when unit is receiving power as well as
power output status
• Host-detection LEDs indicate connection to either
FireWire or USB host


Installation Instructions

1. Check the accessories packaged with your Notebook DriveDock. Please contact WiebeTech if any items

ページ2に含まれる内容の要旨

WiebeTech LLC 3. Connect the hard drive to the dock. If you’ve removed the drive from a laptop computer, it may be inside a mounting sleeve. You’ll need to remove this so that the drive will fit with the dock. Place the drive onto the green plate with the label side up. Carefully slide the drive forward until the pins are fully inserted into the IDE connector. If you wish, you may secure the drive in place with the included screws. The upright pins are not used in

ページ3に含まれる内容の要旨

WiebeTech LLC Usage with Macintosh Computers Compatibility The Notebook DriveDock v4 is fully plug-and-play under Mac OS X. No drivers are needed. The USB 2.0 port is USB 1.1 compatible. Mounting and Ejecting Volumes If the hard drive attached to the DriveDock is already formatted, an icon representing the drive’s volume will appear (mount) on the desktop. You can begin using the volume right away. If the drive is unformatted, a message will appear on the desktop saying th

ページ4に含まれる内容の要旨

WiebeTech LLC Technical Specifications Product Codes NBDDv4, NBDD8v4 Interface • FireWire 400 (NBDDv4) or 800 (NBDD8v4) using OXFW911 • USB 2.0 (backwards compatible with USB 1.1) Optional Power Supply 100-240VAC +12V / 3A (not included—WiebeTech Part # PWR-3) Power Input (+12V): +12V DC Jack (+12V / +5V): Standard disk drive 4-pin Molex power jack Power Output +5V at 0.75A Power Switch On / Off Host Indicators • FireWire host attached LED • USB host attached LED Access Indic