ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
SAFETY INSTRUCTIONS "DANGER", "WARNING" and "CAUTION" notices appear throughout this manual. It is the responsibility of the operator of the equipment to read, understand and follow these no- tices. If you have any questions regarding these safety instructions, please contact a FURUNO agent or dealer. This notice indicates a potentially hazardous situation which, if not avoided, will result in death or DANGER serious injury. This notice indicates a potentially hazardous situation which, if not a
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
TABLE OF CONTENTS FOREWORD ............................................. v 2.25 The MOB Function ....................... 2-25 2.26 Stopping Plotting of Track ............ 2-26 2.27 Changing Track Plotting Interval.. 2-27 1. OPERATIONAL OVERVIEW 2.28 Erasing All Track, Marks .............. 2-27 1.1 System Configuration ....................... 1-1 1.2 Control Description .......................... 1-2 3. VIDEO SOUNDER 1.3 Inserting Chart Cards ........................ 1-2 OPERATION 1.4 Turning On/
ページ6に含まれる内容の要旨
6. MAINTENANCE & TROUBLESHOOTING 6.1 Maintenance...................................... 6-1 6.2 Replacement of Fuse ........................ 6-2 6.3 Self Tests ........................................... 6-2 6.4 GPS Monitor Display ....................... 6-4 6.5 GPS Receiver Status Indication ........ 6-5 6.6 Troubleshooting Table ...................... 6-6 6.7 Memory Card Operations (for technicians) ................................ 6-8 6.8 Demonstration Display ..................... 6-9
ページ7に含まれる内容の要旨
FOREWORD A Word to GP-1600F Owners Congratulations on your choice of the FURUNO GP-1600F GPS/ PLOTTER/SOUNDER. We are confident you will see why the FURUNO name has become synonymous with quality and reli- ability. For over 40 years FURUNO Electric Company has enjoyed an enviable reputation for innovative and dependable marine elec- tronics equipment. This dedication to excellence is furthered by our extensive global network of agents and dealers. This equipment is designed and constructed to me
ページ8に含まれる内容の要旨
Features The GP-1600F is a totally integrated GPS receiver, video plotter and video sounder. It mainly consists of a display unit, antenna unit and a dual frequency transducer. Navigation information is displayed on a bright 6-inch LCD. On- screen information include position, range and bearing to cursor position, range bearing and TTG to waypoint, ETA to waypoint, etc. A high sensitivity receiver tracks up to eight satellites simulta- neously. An 8-state Kalman filter ensures optimum accuracy i
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
1.2 Control Description All operations of the GP-1600F are carried out with the controls on the front panel of the display unit. All controls respond immedi- ately to your command and the unit emits a beep to signify it has accepted your command. (Invalid key input emits several beeps.) Arrow keys Shifts cursor, picture, VRM; select items on menu. Selects presentation Displays main menu; MENU NU/CU ESC ENT mode: north-up or escapes current operation. course-up. SNDR PLTR Selects video 1 6 Select
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
1.5 Selecting Chart Scale Press the [ZOOM IN] or [ZOOM OUT] key to select suitable chart scale. Display range appears at the center of the display momen- tarily when the zoom keys are pressed. 1.6 Adjusting Tone and Brilliance 1) Press the [TONE] key. The tone and brilliance setting display appears. LOW HIGH TONE: 5 LOW HIGH BRILL: 3 Figure 1-5 Tone and display brilliance setting display 2) Operate the [t] or [s] key to adjust display tone. 3) Press the [s ] or [t ] ke
ページ13に含まれる内容の要旨
Plotter/video sounder display This display provides a plotter display on the left 2/3 of the screen and the normal video sounder display on the right 1/3. It is useful for searching for fish schools at cruising speed. Sounder display Plotter display 0 50 100 Chart icon 150 Range and bearing to 200k 200 destination waypoint Receive mode or WP001 120° 223.8nm alarm message CSE 180° SPD 16.8kt 2D Ship's course Ship's mains DEP 113.6 ft TMP 16.0°C 12.0V and speed voltage POS
ページ14に含まれる内容の要旨
Graphic data display, autopilot connection This display provides position, range and bearing to destination waypoint, trip distance, Estimated Time of Arrival (ETA) at desti- nation, Time-To-Go to destination (TTG), and XTE scale, which shows the amount (in nautical miles) and direction to steer to re- turn to intended course. The XTE scale in Figure 1-9 shows you should steer right by 0.3 nautical miles to return to intended course. Own ship's position Bearing to destination POS waypoint 34° 26
ページ15に含まれる内容の要旨
1.8 Plotter Display Icons Various icons appear on the display to alert you to operating status. These icons are as follows: Chart icons. See page 2-4. Chart position offset applied. L/L position offset applied. L/L Track recording/plotting turned off. H Alarm setting violated. Low voltage of internal battery D E Demonstaration mode M O Figure 1-11 Plotter display icons 1–7
ページ16に含まれる内容の要旨
1.9 Video Sounder Displays Five video sounder displays are available: normal, marker zoom, bottom zoom, bottom-lock and A-scope display. You may select a video sounder display with the [SNDR] key. Normal video sounder display Water Depth scale temperature °C 0 scale 30 Water temperature 20 display 50 Water VRM 10 68.3 temperature graph 0 100 Fish school Tone bar 150 Seabed 200 Depth Transmit 162 frequency 200k CSE 180.0° SPD 16.8kt 3D DEP 113.6 ft TMP 16.0 °C 12.0V POS 34° 26.245
ページ17に含まれる内容の要旨
Bottom zoom display This display is useful for discerning the shape and material of the seabed. The seabed is automatically tracked so bottom echoes lo- cate on the lower half of the screen. Normal 0 display 100 40.0 Bottom zoom 50 Display 120 display range marker 100 140 150 160 200 162 180 200k 2D CSE 180.0° SPD 16.8kt 12.0V DEP 113.6 ft TMP 16.0 °C POS 34° 26.245' N 135° 41.232' E Figure 1-14 Bottom zoom display plus normal display Bottom-lock display The bottom-lock disp
ページ18に含まれる内容の要旨
A-scope display This display shows echoes at each transmission with amplitudes and tone proportional to their intensities, on the right 1/3 of the screen. It is useful for estimating the kind of fish school and sea- bed composition. 0 A-scope 50 68.3 display 100 Normal display 150 200 160 200k 2D CSE 180.0° SPD 16.8kt 12.0V DEP 113.6 ft TMP 16.0 °C POS 34° 26.245' N 135° 41.232' E Figure 1-16 A-scope display (right side) 1–10
ページ19に含まれる内容の要旨
1.10 Menu Operation Most major operations are carried through menus. Basic menu operation 1) Press the [MENU ESC] key to display the MAIN menu. MAIN MENU 1. DISPLAY SETUP 2. TRACK/MARK SETUP 3. ERASE TRACK/MARK 4. ROUTE/ROUTE LIST 5. ALARM SETUP 6. VIDEO SOUNDER SETUP 7. MEMORY SAVE/LOAD 8. CLEAR MEMORY 0. SYSTEM MENU st :Cursor ENT:Sel ESC:Esc Figure 1-17 MAIN menu 2) Press appropriate numeric key or press [s ]/[t ] key and [NU/ CU ENT] key to select menu. The highlighted cursor shifts
ページ20に含まれる内容の要旨
1.11 Menu Displays Plotter menu Video sounder menu Auto mode menu SELECT PLOTTER MODE SELECT SOUNDER MODE AUTO MODE s Cruise Normal s Plotter Fish Marker Zoom Plotter/Sounder t Manual Bottom Zoom Data Bottom Lock Lowt sHigh Graphic s Gain A-Scope t Highway Range 15 30 60 50kHz 200kHz PLTR:Sel ESC:Close 120 200 400 800 ft SNDR:Sel ESC:Close t Shift 0 ft Waypoint menu SELECT WPT MODE Own Positi
