ページ1に含まれる内容の要旨
Owner’s Manual
Havis Rugged Mobile Docking Station
For Dell XFR & ATG Computers
DS-DELL-100 Series / DS-DELL-220 Series
DS-DELL-101 DS-DELL-221
DS-DELL-101-3 DS-DELL-223
DS-DELL-103
DS-DELL-100 Series/200 Series/210 Series
Havis Rugged Mobile Docking Station
For Dell XFR & ATG Computers
Havis, Inc.
75 Jacksonville Road, PO Box 2099
Warminster, PA 18974
47801 Anchor Court
Plymouth, MI 48170
www.havis.com 1-800-524-9900
www.havis.com
1-800-524-9900
DS-DELL-100-220_OMN_9-11
ページ2に含まれる内容の要旨
(Original Instructions) Before Beginning Related Products Havis is pleased to provide this Owner’s Manual to aid in the proper installation Havis offers a wide variety of accessory products specifically for and use of the DS-DELL-100 Series/220 Series Docking Station for the use with the DS-DELL-100 & DS-DELL-220 Series Docking Station. Dell XFR & ATG laptop computers. For more information or to order, please visit www.havis.com. For questions regarding the set-up of your DS-DELL-100 Series/220
ページ3に含まれる内容の要旨
Operation - Docking (continued) 5) For theft deterrence, secure computer by locking Docking Station with supplied key (Hardware Kit Item 2). • FOR SAFE & PROPER SYSTEM FUNCTION, SPECIFIC DOCKING STATION MODELS MUST BE USED WITH SPECIFIC DELL COMPUTER MODELS. Lock - DS-DELL-100 SERIES (101, 103, ETC.) DOCKING STATIONS ARE INTENDED FOR USE WITH DELL E6400, E6410 & E6420 XFR COMPUTERS ONLY. - DS-DELL-220 SERIES (221, 223) DOCKING STATIONS ARE INTENDED FOR USE
ページ4に含まれる内容の要旨
Table of Contents Operation - Docking • DO NOT MATE COMPUTER TO DOCKING STATION UNLESS COMPUTER’S DOCKING Specifications 4 CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT. • DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, Parts Included 5 CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION. Port Replication Capability 5 1) To load the computer, first ensure Docking Station is unlatched by pushing the Lock to release the Latch Handle. Once Docking Station unla
ページ5に含まれる内容の要旨
Cable Management (continued) Parts Included Docking Station 5) Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion. Macro Alignment Brackets Strain Relief Points (DS-DELL-220 Series only) 6) Tie off cables onto a stationary part of the mounting system. Foot Pads Docking Connector (Mounting system not included with Docking Station) (DS-DELL-220 Series only) Front Hooks Lock Power Button/LED Latch Handle Mounting Bracket Ha
ページ6に含まれる内容の要旨
Installation Cable Management 1) Install the Mounting Bracket to the Motion Device using (4) 1/4“-20 screws 1) Tip the Docking Station forward to a position that is comfortable to work with. (Hardware Kit Item 3). Torque screws to 120 in-lbs (13.4Nm) ± 10%. 2) Install all cables that are necessary for computing needs. NOTE: Numerous hole patterns present in Mounting Bracket will accommodate Havis Motion Devices as well as most competitors’. 3) Use
ページ7に含まれる内容の要旨
Installation Cable Management 1) Install the Mounting Bracket to the Motion Device using (4) 1/4“-20 screws 1) Tip the Docking Station forward to a position that is comfortable to work with. (Hardware Kit Item 3). Torque screws to 120 in-lbs (13.4Nm) ± 10%. 2) Install all cables that are necessary for computing needs. NOTE: Numerous hole patterns present in Mounting Bracket will accommodate Havis Motion Devices as well as most competitors’. 3) Use
ページ8に含まれる内容の要旨
Cable Management (continued) Parts Included Docking Station 5) Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion. Macro Alignment Brackets Strain Relief Points (DS-DELL-220 Series only) 6) Tie off cables onto a stationary part of the mounting system. Foot Pads Docking Connector (Mounting system not included with Docking Station) (DS-DELL-220 Series only) Front Hooks Lock Power Button/LED Latch Handle Mounting Bracket Ha
ページ9に含まれる内容の要旨
Table of Contents Operation - Docking • DO NOT MATE COMPUTER TO DOCKING STATION UNLESS COMPUTER’S DOCKING Specifications 4 CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT. • DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, Parts Included 5 CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION. Port Replication Capability 5 1) To load the computer, first ensure Docking Station is unlatched by pushing the Lock to release the Latch Handle. Once Docking Station unla
ページ10に含まれる内容の要旨
Operation - Docking (continued) 5) For theft deterrence, secure computer by locking Docking Station with supplied key (Hardware Kit Item 2). • FOR SAFE & PROPER SYSTEM FUNCTION, SPECIFIC DOCKING STATION MODELS MUST BE USED WITH SPECIFIC DELL COMPUTER MODELS. Lock - DS-DELL-100 SERIES (101, 103, ETC.) DOCKING STATIONS ARE INTENDED FOR USE WITH DELL E6400, E6410 & E6420 XFR COMPUTERS ONLY. - DS-DELL-220 SERIES (221, 223) DOCKING STATIONS ARE INTENDED FOR USE
ページ11に含まれる内容の要旨
(Original Instructions) Before Beginning Related Products Havis is pleased to provide this Owner’s Manual to aid in the proper installation Havis offers a wide variety of accessory products specifically for and use of the DS-DELL-100 Series/220 Series Docking Station for the use with the DS-DELL-100 & DS-DELL-220 Series Docking Station. Dell XFR & ATG laptop computers. For more information or to order, please visit www.havis.com. For questions regarding the set-up of your DS-DELL-100 Series/220
ページ12に含まれる内容の要旨
Owner’s Manual Havis Rugged Mobile Docking Station For Dell XFR & ATG Computers DS-DELL-100 Series / DS-DELL-220 Series DS-DELL-101 DS-DELL-221 DS-DELL-101-3 DS-DELL-223 DS-DELL-103 DS-DELL-100 Series/200 Series/210 Series Havis Rugged Mobile Docking Station For Dell XFR & ATG Computers Havis, Inc. 75 Jacksonville Road, PO Box 2099 Warminster, PA 18974 47801 Anchor Court Plymouth, MI 48170 www.havis.com 1-800-524-9900 www.havis.com 1-800-524-9900 DS-DELL-100-220_OMN_9-11
