ページ1に含まれる内容の要旨
273-1825rc.fm Page 1 Tuesday, June 1, 1999 2:05 PM
Cat. No. 273-1825
OWNER’S MANUAL
Please read before using this equipment.
Notebook Computer
Universal 30W Power Adapter
ページ2に含まれる内容の要旨
273-1825rc.fm Page 2 Tuesday, June 1, 1999 2:05 PM To reduce the risk of fire or shock hazard, do not WARNING: expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK. DO NOT ! OPEN. TO REDUCE THE RISK OF ELECTRIC CAUTION: SHOCK, DO NOT REMOVE COVER OR BACK. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient
ページ3に含まれる内容の要旨
273-1825rc.fm Page 3 Tuesday, June 1, 1999 2:05 PM FEATURES Your RadioShack Notebook Computer Universal 30W Power Adapter powers notebook computers and other electronic de- vices by converting a nominal 12-volt input voltage to a regu- lated output voltage of from 6 to 21 volts at up to 30 watts of continuous power. Caution: This power adapter is intended for mobile use in automobiles, trucks, boats, on commercial aircraft, or with 12V DC portable power sources and is safe for outdoor use. Ca
ページ4に含まれる内容の要旨
273-1825rc.fm Page 4 Tuesday, June 1, 1999 2:05 PM ® Interchangeable Adaptaplug Connectors — three Ra- dioShack Adaptaplug adapters are included with your power adapter for connecting it to most notebook computers. Addi- tional Adaptaplugs are available from RadioShack. Power Indicators — the power adapter has two indicators. One is located on the cigarette-lighter plug and lights when input power is available. The other is located on the power adapter and stays lit when conditions are normal
ページ5に含まれる内容の要旨
273-1825rc.fm Page 5 Tuesday, June 1, 1999 2:05 PM Low Input Voltage Shutdown — a special circuit shuts down the adapter when the input voltage falls below 10V DC. This safeguards batteries used to power the adapter that are susceptible to damage when operated below such voltages. Input Coil Cord — a special polyurethane material with “memory” capability enables the cord to stretch up to 5 feet and return to its original compact size of about 12 inches to prevent tangling. 5
ページ6に含まれる内容の要旨
273-1825rc.fm Page 6 Tuesday, June 1, 1999 2:05 PM CONTENTS Safety Instructions ............................................................ 7 Preparation ........................................................................ 9 Adjusting Output Voltage ............................................. 9 Selecting the Adaptaplug ........................................... 11 Installing the Adaptaplug ............................................ 12 Using the Adapter ..............................
ページ7に含まれる内容の要旨
273-1825rc.fm Page 7 Tuesday, June 1, 1999 2:05 PM SAFETY INSTRUCTIONS This manual contains important safety and operating instruc- tions for your power adapter. Before you use the power adapter, read all the instructions and cautionary markings in this manual, on the power adapter, and on the product that you will connect to the power adapter. Warning: To reduce the risk of injury: • Do not disassemble the power adapter; take it to your local RadioShack store when service or repair is requi
ページ8に含まれる内容の要旨
273-1825rc.fm Page 8 Tuesday, June 1, 1999 2:05 PM • Slots and openings on the top and bottom of the power adapter are for ventilation. To ensure reliable operation, and to protect the adapter from overheating, be sure these openings are not blocked or covered. • Unplug the power adapter from the DC power source before attempting to adjust voltage, change tips, or clean it. Do not use liquid aerosol cleaners. Use a damp cloth for cleaning, then wipe it dry immediately. • Do not operate the p
ページ9に含まれる内容の要旨
273-1825rc.fm Page 9 Tuesday, June 1, 1999 2:05 PM PREPARATION ADJUSTING OUTPUT VOLTAGE Warning: Your power adapter provides direct current (DC) voltage. Do not use it with devices that are not specifically identified as requiring DC voltage. Do not use it with devices that require AC voltage. Damage to the device could result. Caution: Make the proper voltage setting before you connect the power adapter to an input power source. Follow these steps to adjust the output voltage. 1. Determine
ページ10に含まれる内容の要旨
l l l l E l S U l E R l O F E l B 273-1825rc.fm Page 10 Tuesday, June 1, 1999 2:05 PM • Review the power or ID plate on the AC power adapter usually used to power the device. Look for the word “OUTPUT” followed by a number and V DC. Example: OUTPUT: 18V DC. If the power adapter or computer indicates a “voltage range,” use the voltage that is closest to the mid-range. Example: OUTPUT: 10–16V DC; set the power supply to 13V DC. Note: The specific notation “V DC” might not be indicated. Instead
ページ11に含まれる内容の要旨
273-1825rc.fm Page 11 Tuesday, June 1, 1999 2:05 PM SELECTING THE ADAPTAPLUG The power adapter comes with three Adaptaplugs. The in- cluded colors and sizes are: • Blue — 5.5 · 2.1 mm • White — 5.5 · 2.5 mm • Green — 6.3 · 3 mm To select the correct Adaptaplug: 1. Disconnect the AC power adapter you are replacing from the AC outlet and from the device to be powered. 2. Refer to “Compatible Computers” on Page 21, or exam- ine the output connector of the AC adapter and compare it to the three
ページ12に含まれる内容の要旨
273-1825rc.fm Page 12 Tuesday, June 1, 1999 2:05 PM INSTALLING THE ADAPTAPLUG Warning: To avoid damage to the device you are using, make sure the Adaptaplug is installed correctly. If you have trouble installing it, take the device to be powered (with all its accessories) and your power adapter to your local Ra- dioShack store for assistance. Caution: Install the Adaptaplug before you connect the pow- er adapter to an input power source. To use your power adapter, your computer must have a DC
ページ13に含まれる内容の要旨
273-1825rc.fm Page 13 Tuesday, June 1, 1999 2:05 PM Note: If the polarity symbol is not displayed on the device to be powered, it might appear on an ID plate on the computer power supply or the original power adapter (see “Compatible Computers” on Page 21). Based on the jack’s polarity, insert the Adaptaplug into the output cable by aligning the correct polarity symbol (+ or –) on the Adaptaplug with the word TIP on the output cord. TIP - Tip Negative (-) TIP + Tip Negative (+) 13
ページ14に含まれる内容の要旨
273-1825rc.fm Page 14 Tuesday, June 1, 1999 2:05 PM USING THE ADAPTER After you have properly adjusted the output voltage and in- stalled the Adaptaplug, follow these steps to use your adapt- er. 1. Insert the Adaptaplug’s tip into the DC input jack on the device to be powered. 2. Insert the power adapter’s cigarette-lighter plug into any DC outlet with a power rating of 12V DC. Suitable receptacles include automobile cigarette-lighter sockets and 12-volt power ports, portable 12-volt batte
ページ15に含まれる内容の要旨
273-1825rc.fm Page 15 Tuesday, June 1, 1999 2:05 PM • If the green indicator on the power adapter’s case does not light, disconnect the adapter from the device being powered, then check the Adaptaplug’s connec- tion for the correct orientation. Caution: Save your data frequently! If you operate your note- book computer after removing its internal battery, an interrup- tion in power might result in an immediate computer shutdown and possible data loss. Such a power interruption could be caused
ページ16に含まれる内容の要旨
273-1825rc.fm Page 16 Tuesday, June 1, 1999 2:05 PM REPLACING THE FUSE If the green indicator on the cigarette-lighter plug does not light after disconnecting the device to be powered, remove the cigarette-lighter plug from the receptacle and check its fuse. To remove the fuse, turn the plug’s knurled knob (4) counterclockwise, then remove the tip cap (3). Lift up one end of the plug so the fuse (2) and the spring (1) fall out. Check the fuse and if necessary, replace the fuse with a 6A fast-
ページ17に含まれる内容の要旨
273-1825rc.fm Page 17 Tuesday, June 1, 1999 2:05 PM TROUBLESHOOTING Some notebook computers have power supplies in excess of the rating of this power adapter (30 watts). In most cases, this higher rating is used to both charge a completely discharged battery and power the computer at the same time. This power adapter can be used for such applications, but it is recom- mended that the computer’s battery be recharged before us- ing this adapter to operate the computer. Caution: Except as noted
ページ18に含まれる内容の要旨
273-1825rc.fm Page 18 Tuesday, June 1, 1999 2:05 PM • Completely recharge the battery before using the com- puter. Use the power adapter to charge the battery, but do not operate the computer during charging. • If the battery is easily removable, remove it from the computer to eliminate the power requirement for recharging. Note: The power adapter can be used to charge the bat- tery in your notebook computer by connecting it to the computer with the battery installed, and leaving the com- pu
ページ19に含まれる内容の要旨
273-1825rc.fm Page 19 Tuesday, June 1, 1999 2:05 PM SPECIFICATIONS Input Voltage ................................................................ 11–16V DC Power ............................................................ 4A (Maximum) In-Rush Current .............................................. 5A, Cold Start @ Room Temperature (77°F/25°C) Standby Current (Minimum) ................... 14.1 mA @ 11V DC 16.5 mA @ 13.8V DC 18.3 mA @ 16V DC Protection Features ..............................
ページ20に含まれる内容の要旨
273-1825rc.fm Page 20 Tuesday, June 1, 1999 2:05 PM Mechanical Dimensions ......................................... 1.7 · 1.4 · 2.6 Inches (43 · 36 · 66 mm) Weight ............................................................ Less than 8 oz (227 g) Enclosure .............. Injection Molded Cycolac ABS, UL94V-0 Indicators ................ Input Power-On LED (Cigarette Lighter) Output Power-On LED (Case) Environmental Temperature: Maximum Performance .......... 32° to 122°F (0° to 50°C) Operat
