ページ1に含まれる内容の要旨
Maintenance & Service Guide
HP Pro 2110 Small Form Factor
HP Pro 3120 Minitower
HP Pro 3120 Small Form Factor
HP Pro 3125 Minitower
HP Pro 3130 Minitower
HP Pro 3130 Small Form Factor
ページ2に含まれる内容の要旨
© Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or om
ページ3に含まれる内容の要旨
About This Book WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. iii
ページ4に含まれる内容の要旨
iv About This Book
ページ5に含まれる内容の要旨
Table of contents 1 Installing and Customizing the Software ........................................................................... 1 Installing the Operating System .................................................................................................. 1 Downloading Microsoft Windows Updates ................................................................................. 2 Installing or Upgrading Device Drivers (Windows systems) .................................................
ページ6に含まれる内容の要旨
Computer Setup—Power .......................................................................................... 27 Computer Setup—Boot ............................................................................................ 28 Computer Setup—Exit .............................................................................................. 29 3 Serial ATA (SATA) Drive Guidelines and Features ............................................................. 30 SATA Hard Drives ..................
ページ7に含まれる内容の要旨
Populating DIMM Sockets ........................................................................................ 47 Installing Memory Modules ....................................................................................... 52 Expansion Cards .................................................................................................................... 54 Cable Management ............................................................................................................... 60
ページ8に含まれる内容の要旨
Drives ................................................................................................................................. 109 Drive Positions ...................................................................................................... 109 Installing and Removing Drives ............................................................................... 110 System Board Drive Connections .............................................................. 111 Removing the Optical Dr
ページ9に含まれる内容の要旨
Helpful Hints ........................................................................................................................ 145 Solving General Problems ..................................................................................................... 147 Solving Diskette Problems ...................................................................................................... 151 Solving Hard Drive Problems .....................................................................
ページ10に含まれる内容の要旨
Country-Specific Requirements ............................................................................................... 193 Appendix C Specifications ................................................................................................ 194 Minitower models ................................................................................................................ 194 Small form factor models ...................................................................................
ページ11に含まれる内容の要旨
1 Installing and Customizing the Software If your computer was not shipped with a Microsoft operating system, some portions of this documentation do not apply. Additional information is available in online help after you install the operating system. NOTE: If the computer was shipped with Windows Vista or Windows 7 loaded, you will be prompted to register the computer with HP Total Care before installing the operating system. You will see a brief movie followed by an online registration form. Fi
ページ12に含まれる内容の要旨
Downloading Microsoft Windows Updates 1. To set up your Internet connection, click Start > Internet Explorer and follow the instructions on the screen. 2. Once an Internet connection has been established, click the Start button. 3. Select the All Programs menu. 4. Click on the Windows Update link. In Windows Vista and Windows 7, the Windows Update screen appears. Click view available updates and make sure all critical updates are selected. Click the Install button and follow the instructions on
ページ13に含まれる内容の要旨
Protecting the Software To protect the software from loss or damage, keep a backup copy of all system software, applications, and related files stored on the hard drive. Refer to the operating system or backup utility documentation for instructions on making backup copies of your data files. Protecting the Software 3
ページ14に含まれる内容の要旨
2 Computer Setup (F10) Utility The computer setup utility differs for the different models. HP Pro 2110 – Computer Setup (F10) Utilities Use Computer Setup (F10) Utility to do the following: ● Change factory default settings. ● Set the system date and time. ● Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage, communications, and input devices. ● Modify the boot order of bootable devices such as hard drives, diskette drives,
ページ15に含まれる内容の要旨
Using Computer Setup (F10) Utilities Computer Setup can be accessed only by turning the computer on or restarting the system. To access the Computer Setup Utilities menu, complete the following steps: 1. Turn on or restart the computer. 2. As soon as the computer is turned on, press F10 before the system boots to the operating system to enter Computer Setup. Press Enter to bypass the title screen, if necessary. NOTE: If you do not press F10 at the appropriate time, you must restart the computer
ページ16に含まれる内容の要旨
Computer Setup—Main NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 2-2 Computer Setup—Main Option Description System Information Allows you to view the following system information: ● Processor Type (view only) ● Processor Speed (view only) ● CPUID/PatchID (view only) ● Cache Size (view only) ● Memory Size (view only) ● Integrated MAC (view only) ● System BIOS (view only) System IDs Allows you to view or change the following system iden
ページ17に含まれる内容の要旨
Table 2-2 Computer Setup—Main (continued) Option Description SATA Controller Allows you to choose how the SATA controller and devices are accessed by the operating system. The following options are available: ● Native Mode - 4 SATA port ● Compatible Mode - 2 PATA devices and 2 SATA devices (ports) Onboard FDC Disables/enables the floppy disk controller. Controller Drive A (view only) Halt On Allows you to set POST error behavior to: ● No Errors ● All Errors ● All But Keyboard POST Delay Allows
ページ18に含まれる内容の要旨
Table 2-3 Computer Setup—Advanced (continued) Option Description MAX DVMT Allows you to specify the DVMT/system memory allocated for video memory: Allocation ● 128MB ● 256MB ● Max Onboard HD Audio Allows you to disable/enable onboard HD audio. OnChip USB Disables/enables the universal host controller interface for USB (Universal Serial Bus). Controller USB Legacy Support Disables/enables USB legacy support function (USB keyboard, USB mouse, and USB flash media). Onboard LAN Disables/enables onb
ページ19に含まれる内容の要旨
Table 2-4 Computer Setup—Boot (continued) Option Description F12 Boot from LAN Disables/enables the F12 Boot from LAN prompt message on the logo screen. Prompt Hard Disk Boot Seq. Allows you to specify the order of attached hard drive devices (such as USB HDD storage or USB flash media). The first drive in the order has priority in the boot sequence and is recognized as drive C (if any devices are attached). Optical Drive Boot Allows you to specify the order in which attached optical drives (in
ページ20に含まれる内容の要旨
Computer Setup—PC Health NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 2-6 Computer Setup—PC Health Option Description Chassis Opened Allows you to disable/enable the chassis intrusion function and clear the intrusion warning. Warning System Fan Fail Disables/enables detection of system fan during POST. Check Smart Fan Function Disables/enables Smart Fan functionality. Enabling optimizes fan control for best acoustic behavior. Current
