ページ1に含まれる内容の要旨
Fujitsu LifeBook
Q2000 Series
BIOS Guide
LifeBook Q Series Model:
Q2010
Document Date: 06/09/06
Document Part Number: FPC58-1522-01
FUJITSU COMPUTER SYSTEMS
1
ページ2に含まれる内容の要旨
LifeBook Q2000 Series BIOS explains each menu in turn, including all submenus and Q2000 Series BIOS setup items. BIOS SETUP UTILITY The following procedures allow you to navigate the setup utility menus: The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS [ ], [ ] 1. To select a menu, use the cursor keys: is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS 2. To select a
ページ3に含まれる内容の要旨
Main Menu 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press key to continue, to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key. ■ If your notebook emits a series of beeps that sounds like a code and the display is blank, please refer to the Troubleshoot-
ページ4に含まれる内容の要旨
▲ ▲ LifeBook Q2000 Series BIOS MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field’s function and any special information needed system parameters. (See Navigating through the Setup to help understand the field’s use. Utility on page 2 for more information.) System Time and System Date can also be The following tables show the names of the menu fields set from your operating system without for the Main menu and its submenus, all of
ページ5に含まれる内容の要旨
Main Menu Table 1: Fields, Options and Defaults for the Main Menu Note that the parameters listed in the following table may vary depending upon your system’s configuration. Menu Field Options Default Description Drive0 Selects the Drive0 The product Display the type of device on this serial ATA/IDE interface. Pressing Serial ATA drive number of the hard the Enter key selects the Drive0 submenu allowing additional device submenu drive. configuration options for this interface. ■ Language: Engl
ページ6に含まれる内容の要旨
▲ LifeBook Q2000 Series BIOS Drive0 Submenu of the Main Menu The Drive0 submenu identifies what ATA devices are installed. PhoenixBIOS Setup Utility Main Drive0 [TOSHIBA MK6006GAH] Item Specific Help Type: [Auto]] Select Serial ATA/IDE LBA Format drive installed here. Total Sectors: 117210240 [Auto] Maximum Capacity: 60012MB The BIOS auto-types the drive on boot time. Multi-Sector Transfers: [16 Sectors] LBA Mode Control: [Enabled] [None] Transfer Mode: [Multiword DMA
ページ7に含まれる内容の要旨
Main Menu Exiting from Main Menu When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys. 7
ページ8に含まれる内容の要旨
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ LifeBook Q2000 Series BIOS ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: (See Navigating through the Setup Utility on page 2 for more information.) ■ Set the keyboard and mouse features. ■ Select between the display panel and an external The following tables show the names of the menu fields CRT display. for the Advanced Menu and its submenus, all of the ■ Enable or disable compensation for your display. options for each field, the defa
ページ9に含まれる内容の要旨
Advanced Menu Table 3: Fields, Options and Defaults for the Advanced Menu Menu Field Description USB Features When selected, opens the USB Features submenu to allow you to enable or disable legacy USB devices and SCSI SubClass support. Miscellaneous Configurations When selected, opens the Miscellaneous Configurations submenu to allow you to enable or disable the power button, Wake Up On LAN, control volume settings, set video memory size, and enable or disable hardware power management. Event
ページ10に含まれる内容の要旨
▲ LifeBook Q2000 Series BIOS Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for turning the Numlock feature on and off. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help Numlock: [Off] [On] or [Off] Numlock is On or Off. [On/Padlock Off] Numlock is On, but use with [Fn] for 10-key input. * Windows XP preserves Numlock state when the user logs off. F1 Help Select Item -/Space Chan
ページ11に含まれる内容の要旨
▲ Advanced Menu Video Features Submenu of the Advanced Menu The Video Features submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display: [Auto] Select display terminal. Compensation: [Enabled] * This setting is not effective after operating system starts up. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure
ページ12に含まれる内容の要旨
▲ LifeBook Q2000 Series BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to enable or disable IDE, Bluetooth, LAN and Wireless LAN Controllers. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Internal Device Configurations Item Specific Help [Disabled] IDE Controller: [Enabled] IDE port is disabled. Bluetooth(R): [Enabled] LAN Controller: [Enabled] [Enabled] Wireless LAN
ページ13に含まれる内容の要旨
▲ Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features submenu provides options for configuring the Intel SpeedStep power management features of the CPU. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit CPU Features Item Specific Help Select Enhanced [Enabled] SpeedStep(R) Technology: Intel(R) SpeedStep(R) On Battery: [Battery Optimized] Technology enabled or On AC: [Maximum Performance] disabled. XD Bit functionality: [Enabled] F1 Help
ページ14に含まれる内容の要旨
▲ LifeBook Q2000 Series BIOS USB Features Submenu of the Advanced Menu The USB Features submenu provides options for enabling or disabling the USB drive. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help [Disabled] Legacy USB Support [Enabled] The feature is disabled. SCSI SubClass Support: [Enabled] [Enabled] Legacy USB Emulation is enabled and USB devices are available without USB aware OS. F1 Help Select Item -/Space Change Va
ページ15に含まれる内容の要旨
▲ Advanced Menu Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the Wake Up On LAN feature, and setting the volume, video memory size, and Hardware Power Management. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Miscellaneous Configurations Item Specific Help Configures the power Power Button: [Disabled] button. [Disabled] Wake up on LAN: Force L
ページ16に含まれる内容の要旨
▲ LifeBook Q2000 Series BIOS Event Logging Submenu of the Advanced Menu The Event Logging submenu configures event logging features for DMI events. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Event Logging Item Specific Help Event Log Capacity: Space Available Press key to Event Log Validity: Valid view the contents of the event log. View Event Log: [Enter] Event Logging: [Enabled] System Boot Event: [Disabled] Clear All Event Logs: [No] Mark Events a
ページ17に含まれる内容の要旨
▲ ▲ ▲ ▲ Security Menu SECURITY MENU – SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security ■ Entering a password incorrectly 3 times in features of your notebook to fit your operating needs a row causes the keyboard and mouse to and to view the current data security configuration. (See be locked out and the warning [System Navigating through the Setup Utility on page 2 for more Disabled] to be displayed. If this hap- information.) pens, restart the compu
ページ18に含まれる内容の要旨
LifeBook Q2000 Series BIOS Table 11: Fields, Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor –— Clear A display-only field. Set is displayed when the system supervisor password is set Password is: and Clear when it is not. User Password is: –— Clear A display-only field. Set is displayed when the general user password is set, and Clear when it is not. Set Supervisor –— [Enter] Sets, changes or cancels the Supervisor Password. The Supervisor Password
ページ19に含まれる内容の要旨
▲ Security Menu Hard Disk Security Submenu of the Security Menu The Hard Disk Security submenu is for configuring hard disk security features. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Hard Disk Security Item Specific Help Drive0 Password Is: Clear Set Drive0 Password [Enter] Password Entry on Boot: [Enabled] F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figu
ページ20に含まれる内容の要旨
▲ LifeBook Q2000 Series BIOS Owner Information Submenu of the Security Menu The Owner Information submenu is for setting owner information. Note that the owner information cannot be set without having entered a Supervisor Password. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Owner Information Item Specific Help Owner Information Is: Clear Set Owner Information [Enter] Foreground Color: [Gray] Background Color: [Black] F1 Help Select Item -/Space Change Values
