ページ1に含まれる内容の要旨
Dell™ Inspiron™ 600m Service Manual
Before You Begin
Preparing to Work Inside the Computer
Recommended Tools
Computer Orientation
Screw Identification
System Components
Memory Module, Mini PCI Card, and Modules
Memory Module
Mini PCI Card
Modules
Color Insert Cover
Reserve Battery
Hard Drive
Keyboard
Display Assembly and Display Latch
Display Assembly
Display Bezel
Display Panel
Display Latch
Palm Rest
Docking Doors
Fan
Bluetooth™ Card
Microprocessor Thermal-Co
ページ2に含まれる内容の要旨
Back to Contents Page Before You Begin Dell™ Inspiron™ 600m Service Manual Preparing to Work Inside the Computer Recommended Tools Computer Orientation Screw Identification Preparing to Work Inside the Computer CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow applicable instructions in safety instructions in the Owner's Manual that
ページ3に含まれる内容の要旨
Recommended Tools The procedures in this manual require the following tools: l #1 Phillips screwdriver l ¼-inch flat-blade screwdriver l Small plastic scribe l Flash BIOS update program floppy disk or CD Computer Orientation 1 back 2 right 3 front 4 left Screw Identification When you are removing and replacing components, photocopy "Screw Identification" as a tool to lay out and keep track of the screws. The placemat provides the number of screws and their siz
ページ4に含まれる内容の要旨
Display Assembly: Display Bezel: Display Panel: (3 each) (6 each) (4 each) Display Latch: Palm Rest: Fan: (3 each) (3 each) (2 each) (9 each) Speakers: Modem: System Board: (1 each) (1 each) (1 each) (1 each) (1 each)
ページ5に含まれる内容の要旨
(4 each) Back to Contents Page
ページ6に含まれる内容の要旨
Back to Contents Page Flashing the BIOS Dell™ Inspiron™ 600m Service Manual 1. Ensure that the AC adapter is plugged in and that the main battery is installed properly. NOTE: If you use a BIOS update program CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD. 2. Insert the BIOS update program floppy disk or CD, and turn on the computer. Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS
ページ7に含まれる内容の要旨
Back to Contents Page Bluetooth™ Card Dell™ Inspiron™ 600m Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the keyboard. 3. Remove
ページ8に含まれる内容の要旨
Back to Contents Page Color Insert Cover Dell™ Inspiron™ 600m Service Manual Removing the Color Insert Cover 1. Press down along the front of the display as shown. 2. Firmly grasp the lip of the cover to detach it from the computer, and pull the cover up. Replacing the Color Insert Cover 1. Place the tabs on the cover in the grooves above the display hinges, and lower the cover over the computer. 2. Press along the front until the cover snaps into place.
ページ9に含まれる内容の要旨
Back to Contents Page Microprocessor Module Dell™ Inspiron™ 600m Service Manual Removing the Microprocessor Module CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: Do not touch the processor die. Press and hold the microproces
ページ10に含まれる内容の要旨
NOTICE: Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in the ZIF socket does not require force. NOTICE: A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and ZIF socket. 1. Align the pin-1 corner of the microprocessor module with the pin-1 corner of the ZIF socket, and insert the microprocessor module. NO
ページ11に含まれる内容の要旨
Back to Contents Page Display Assembly and Display Latch Dell™ Inspiron™ 600m Service Manual Display Assembly Display Bezel Display Panel Display Latch Display Assembly CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTIC
ページ12に含まれる内容の要旨
1 display 2 computer base 1 display bumpers (6) 5 top cover 2 M2 x 5-mm screws (6) 6 M2 x 5-mm screws (4) 3 display bezel 7 flex cable connector 4 display panel 8 flex-cable retention bracket
ページ13に含まれる内容の要旨
Display Bezel CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the keyboard. 3. Remove the display assembly. 4. Use a plastic scribe to pry the six
ページ14に含まれる内容の要旨
Display Latch NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. 1. Remove the keyboard. 2. Remove the display assembly. 3. Remove the display bezel. 4. Remove the three M2.5 x 4-mm screws that secure the display latch bracket to the top cover. 5. Lift
ページ15に含まれる内容の要旨
Back to Contents Page Docking Doors Dell™ Inspiron™ 600m Service Manual Removing the Docking Doors CAUTION: Before working inside your computer, read the safety instructions in your Owner's Manual. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Gently bend the
ページ16に含まれる内容の要旨
Back to Contents Page
ページ17に含まれる内容の要旨
Back to Contents Page Fan Dell™ Inspiron™ 600m Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the keyboard. 3. Remove the palm res
ページ18に含まれる内容の要旨
Back to Contents Page Hard Drive Dell™ Inspiron™ 600m Service Manual CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive. CAUTION: Before working inside your computer, read the safety instructions in your Owner's Manual. NOTICE: To prevent data loss, shut down your computer before removing the hard drive. Do not remove the hard drive while the computer is on, in standby mode, or in hibernate mode.
ページ19に含まれる内容の要旨
5. Open the display approximately 1/2 inch. NOTICE: Use firm and even pressure to slide the drive into place. If you force the hard drive into place using excessive force, you may damage the connector. 6. Press the hard drive cover down until it is fully seated in the bay, and tighten the screw. 7. Use the Operating System CD to install the operating system for your computer. 8. Use the Drivers and Utilities CD to install the drivers and utilities for your computer. Back
ページ20に含まれる内容の要旨
Back to Contents Page Keyboard Dell™ Inspiron™ 600m Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Turn the computer right-side up and open
