ページ1に含まれる内容の要旨
Hybrid IP-PBX
Installation Manual
KX-TDA100
Model KX-TDA200
Thank you for purchasing a Panasonic Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
SD Logo is
KX-TDA100/KX-TDA200: PMPR Software File Version 3.0000 or later
a trademark.
ページ2に含まれる内容の要旨
System Components System Components Table Category Model No. Description Shelves KX-TDA100 Basic Shelf KX-TDA200 Basic Shelf Main Processing Card Main Processing Card (MPR) MPR Option Card KX-TDA0105 Memory Expansion Card (MEC) KX-TDA0196 Remote Card (RMT) Trunk Cards KX-TDA0180 8-Port Analogue Trunk Card (LCOT8) KX-TDA0181 16-Port Analogue Trunk Card (LCOT16) KX-TDA0182 8-Port DID Card (DID8) KX-TDA0183 4-Port Analogue Trunk Card (LCOT4) KX-TDA0184 8-Port E & M Trunk Card (E&M8) KX-TDA0187 T-1
ページ3に含まれる内容の要旨
System Components Table Category Model No. Description Other Cards KX-TDA0161 4-Port Doorphone Card (DPH4) KX-TDA0162 2-Port Doorphone Card (German Type) (DPH2) KX-TDA0164 4-Port External Input/Output Card (EIO4) KX-TDA0166 16-Channel Echo Canceller Card (ECHO16) KX-TDA0168 Extension Caller ID Card (EXT-CID) KX-TDA0190 Optional 3-Slot Base Card (OPB3) KX-TDA0191 4-Channel Message Card (MSG4) KX-TDA0410 CTI Link Card (CTI-LINK) Optional SD Memory KX-TDA0820 SD Memory Card for Software Upgrade Car
ページ4に含まれる内容の要旨
Available Proprietary Telephones The Hybrid IP-PBX supports all of the Panasonic KX-T7000, KX-TD7000, KX-TCA, and KX-NT series: • Digital/Analogue/IP proprietary telephones (e.g., KX-T7625, KX-T7630, KX-T7633, KX-T7636, KX-NT136) Portable stations (e.g., KX-TCA155, KX-TCA255, KX-TD7690) DSS consoles (e.g., KX-T7640) Single line telephones (e.g., KX-T7710) Note The Hybrid IP-PBX does not support the following telephones: KX-T30800 series Proprietary Telephones and DSS consoles KX-T6160
ページ5に含まれる内容の要旨
Important Safety Instructions SAFETY REQUIREMENTS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean with a damp cloth. 4. Do not use this product near
ページ6に含まれる内容の要旨
SAVE THESE INSTRUCTIONS 6 Installation Manual
ページ7に含まれる内容の要旨
Precaution Keep the unit away from heating appliances and devices that generate electrical noise such as fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of the Hybrid IP-PBX. This unit should be kept free of dust, moisture, high temperature (more than 40 ˚C) and vibration, and should not be exposed to direct sunlight. If you are having problems making calls to outside destinations, follow this procedure to test the trunks: 1. Disconnect
ページ8に含まれる内容の要旨
For users in Finland, Norway and Sweden only This unit may only be installed in a room or space with restricted access, and equipotential bonding must be applied. For information on earthing, refer to "2.2.5 Frame Earth Connection". For users in New Zealand only This equipment shall not be set to make automatic calls to the Telecom '111' Emergency Service. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with min
ページ9に含まれる内容の要旨
WARNING • THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED SERVICE PERSONNEL. IF DAMAGE TO THE UNIT EXPOSES ANY INTERNAL PARTS, DISCONNECT THE POWER SUPPLY CORD IMMEDIATELY AND RETURN THE UNIT TO YOUR DEALER. UNPLUG THIS UNIT FROM THE AC OUTLET IF IT EMITS SMOKE, AN ABNORMAL SMELL OR MAKES UNUSUAL NOISE. THESE CONDITIONS CAN CAUSE FIRE OR ELECTRIC SHOCK. CONFIRM THAT SMOKE HAS STOPPED AND CONTACT AN AUTHORISED PANASONIC FACTORY SERVICE CENTRE. WHEN RELOCATING THE EQUIPMENT, F
ページ10に含まれる内容の要旨
MODEL NO. SERIAL NO. DATE OF PURCHASE NAME OF DEALER DEALER'S ADDRESS DEALER'S TEL. NO. The KX-TDA100E/KX-TDA200E, the KX-TDA100NEKX-TDA200NE, the KX- TDA100GR/KX-TDA200GR, and the KX-TDA100CE/KX-TDA200CE are designed to interwork with the: Analogue Public Switched Telephone Network (PSTN) of European countries Pan-European Integrated Services Digital Network (ISDN) using ISDN basic rate access Pan-European Integrated Services Digital Network (ISDN) using ISDN primary rate access
ページ11に含まれる内容の要旨
Introduction This Installation Manual is designed to serve as an overall technical reference for the Panasonic Hybrid IP- PBX, KX-TDA100/KX-TDA200. It provides instructions for installing the hardware, and programming the Hybrid IP-PBX using the KX-TDA Maintenance Console. The Structure of this Manual This manual contains the following sections: Section 1 System Outline Provides general information on the Hybrid IP-PBX, including the system capacity and specifications. Section 2 Installation De
ページ12に含まれる内容の要旨
Precautions for Users in the United Kingdom FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three-pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover,
ページ13に含まれる内容の要旨
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse and fuse cover. The equipment must be connected to direct extension lines, and a payphone should not be connected as an extension. 999 and 112 can be dialled on the apparatus after accessing the Exchange line for the purpose of making outgoing calls to the BT emergency services. During dialling, this apparatus may tinkle the bells of other telephones using the same line. This is not a fault and we advi
ページ14に含まれる内容の要旨
Table of Contents 1 System Outline .....................................................................................17 1.1 System Highlights...........................................................................................................18 1.1.1 System Highlights .............................................................................................................18 1.2 Basic System Construction ................................................................................
ページ15に含まれる内容の要旨
2.4.11 IP-GW4 Card (KX-TDA0480) ......................................................................................... 101 2.4.12 IP-GW4E Card (KX-TDA0484) ....................................................................................... 103 2.4.13 IP-GW16 Card (KX-TDA0490) ....................................................................................... 105 2.5 Information about the Extension Cards ..................................................................... 107 2.5.1 CS
ページ16に含まれる内容の要旨
2.13.1 Starting the Hybrid IP-PBX .............................................................................................209 3 Guide for the KX-TDA Maintenance Console...................................211 3.1 Overview ........................................................................................................................212 3.1.1 Overview .........................................................................................................................212 3.2 Connect
ページ17に含まれる内容の要旨
Section 1 System Outline This section provides general information on the Hybrid IP- PBX, including the system capacity and specifications. Installation Manual 17
ページ18に含まれる内容の要旨
1.1 System Highlights 1.1 System Highlights 1.1.1 System Highlights Networking Features This Hybrid IP-PBX supports the following networking features: TIE Line Service A TIE line is a privately leased communication line between 2 or more PBXs, which provides cost effective communications between company members at different locations. Virtual Private Network (VPN) VPN is a service provided by the telephone company. It uses an existing line as if it were a private line. QSIG Network QSIG is a pr
ページ19に含まれる内容の要旨
1.1 System Highlights Parallel Mode An SLT can be connected to an APT or DPT which is connected to a Super Hybrid Port of the PBX. The SLT shares the same extension number with the APT or DPT. EXtra Device Port (XDP) Mode An SLT can be connected to a DPT which is connected to a Super Hybrid Port of the PBX. Unlike parallel mode, XDP mode allows each telephone to act as an independent extension with its own extension number. Digital XDP A DPT can be connected to another DPT which is connected
ページ20に含まれる内容の要旨
1.2 Basic System Construction 1.2 Basic System Construction 1.2.1 Basic Shelf The basic shelf contains an MPR card for controlling the Hybrid IP-PBX. To use the system, install a power supply unit (PSU) in the PSU Slot and optional service cards in the basic shelf. KX-TDA100 KX-TDA200 Construction of the Basic Shelf A: Slots for Expansion B: MPR Card A A B B 20 Installation Manual
