ページ1に含まれる内容の要旨
Hybrid IP-PBX
Feature Guide
KX-TDA15/KX-TDA30
Model KX-TDA100/KX-TDA200
Thank you for purchasing the Panasonic KX-TDA15/KX-TDA30/KX-TDA100/KX-TDA200, Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDA15/KX-TDA30/KX-TDA100/KX-TDA200: Version 1.1
ページ2に含まれる内容の要旨
Introduction About this Feature Guide This Feature Guide is designed to serve as an overall feature reference for the Panasonic Hybrid IP-PBX. It explains what this PBX can do, and how to obtain the most out of its many features and facilities. This manual contains the following sections: Section 1, Call Handling Features Provides details about the call handling features. Section 2, System Configuration and Administration Features Provides details about the system configuration and administrat
ページ3に含まれる内容の要旨
Installation Manual Provides instructions for installing the hardware and maintenance of the PBX. User Manual Provides operating instructions for end users using PTs, SLTs, PSs, or DSS Consoles. The KX-TDA15E/KX-TDA30E, the KX-TDA15NE/KX-TDA30NE, the KX-TDA15GR/KX- TDA30GR, and the KX-TDA30CE are designed to interwork with the: Analogue Public Switched Telephone Network (PSTN) of a European country Pan-European Integrated Services Digital Network (ISDN) using ISDN basic rate access The KX-TD
ページ4に含まれる内容の要旨
For further details, please refer to the on-line help of the Maintenance Console ( 3.2.1 Installing and Starting the Maintenance Console). Feature Highlights Networking Features This PBX supports the following networking features: TIE Line Service A TIE line is a privately leased communication line between two or more PBXs, which provides cost effective communications between company members at different locations. ( 1.28.1 TIE Line Service) Virtual Private Network (VPN) VPN is a service prov
ページ5に含まれる内容の要旨
Parallelled Telephone Features By connecting telephones in parallel, you can increase the number of telephones connected to the PBX without adding additional extension cards. ( 1.10.9 Parallelled Telephone) Parallel Mode An SLT can be connected to an APT or DPT which is connected to a Super Hybrid port of the PBX. The SLT shares the same extension number with the APT or DPT. EXtra Device Port (XDP) Mode An SLT can be connected to a DPT which is connected to a Super Hybrid port of the PBX. Unl
ページ6に含まれる内容の要旨
Table of Contents 1 Call Handling Features .................................................................15 1.1 Incoming Call Features........................................................................................ 16 1.1.1 Incoming Trunk Call Features................................................................................. 16 1.1.1.1 Incoming Trunk Call Features—SUMMARY......................................................................................... 16 1.1.1.2 Direct
ページ7に含まれる内容の要旨
1.5.5.2 Line Preference—Outgoing ................................................................................................................. 83 1.5.5.3 Trunk Access ....................................................................................................................................... 84 1.6 Memory Dialling Features ....................................................................................86 1.6.1 Memory Dialling Features ...........................................
ページ8に含まれる内容の要旨
1.14.1 Paging .................................................................................................................. 141 1.15 Broadcasting Features (KX-TDA30/KX-TDA100/KX-TDA200 only) ................ 143 1.15.1 Broadcasting (KX-TDA30/KX-TDA100/KX-TDA200 only) .................................... 143 1.16 Optional Device Features .................................................................................. 146 1.16.1 Doorphone Call ...............................................
ページ9に含まれる内容の要旨
1.26 Extension Controlling Features.........................................................................239 1.26.1 Extension Personal Identification Number (PIN)...................................................239 1.26.2 Extension Feature Clear .......................................................................................241 1.26.3 Walking Extension.................................................................................................242 1.26.4 Timed Reminder ...........
ページ10に含まれる内容の要旨
3.3.1 Programming Instructions .................................................................................... 324 3.3.2 Basic Programming .............................................................................................. 329 Date & Time [000] .............................................................................................................................. 329 System Speed Dialling Number [001] .........................................................................
ページ11に含まれる内容の要旨
LCOT/BRI Trunk Name [401] ............................................................................................................. 340 LCOT/BRI Trunk Group Number [402]............................................................................................... 340 LCOT/BRI Trunk Number Reference [409] ........................................................................................ 341 LCOT Dialling Mode [410]........................................................................
ページ12に含まれる内容の要旨
Incoming Call Distribution Group Floating Extension Number [622].................................................. 350 Incoming Call Distribution Group Name [623].................................................................................... 350 Incoming Call Distribution Group Distribution Method [624] .............................................................. 350 Destination for Overflow Time Expiration [625] ............................................................................
ページ13に含まれる内容の要旨
4.3 List of Abbreviations ..........................................................................................367 4.3.1 List of Abbreviations..............................................................................................367 4.4 Revision History..................................................................................................369 4.4.1 KX-TDA100/KX-TDA200 Version 1.1 ....................................................................369 4.4.2 KX-TDA30 Version
ページ14に含まれる内容の要旨
14 Feature Guide
ページ15に含まれる内容の要旨
Section 1 Call Handling Features Feature Guide 15
ページ16に含まれる内容の要旨
1.1 Incoming Call Features 1.1 Incoming Call Features 1.1.1 Incoming Trunk Call Features 1.1.1.1 Incoming Trunk Call Features—SUMMARY Description Incoming calls via a trunk (public line) are distributed to their destination using a suitable distribution feature. 1. Available Networking Type for Each Optional Trunk Card Type Each trunk port of an optional trunk card can be assigned its networking type: Public, Private, or VPN (Virtual Private Network). Networking Public Private Virtual Private
ページ17に含まれる内容の要旨
1.1 Incoming Call Features 2. Distribution Feature One of the following features can be assigned to each trunk port: Feature Description Details in Direct In Line Directs a call to a preprogrammed single 1.1.1.2 Direct In (DIL) destination (e.g., Operator). Line (DIL) Direct Inward Directs a call with a DID number from a DID 1.1.1.3 Direct Dialling (DID) line to a preprogrammed destination. Inward Dialling DID is also known as Direct Dialling In (DDI). (DID)/Direct Dialling In (DDI) Mult
ページ18に含まれる内容の要旨
1.1 Incoming Call Features 5. Available Destination Destination Availability Wired Extension (PT/SLT/ISDN Extension/T1-OPX) PS Incoming Call Distribution Group PS Ring Group VM Group (DTMF/DPT) External Pager (TAFAS) DISA Analogue/ISDN Remote Maintenance Idle Line Access no. + Phone no. Trunk Group Access no. + Trunk Group no. + Phone no. Other PBX Extension (TIE with no PBX Code) Other PBX Extension (TIE with PBX Code) 6. Intercept Routing After distribution, the following features may be requ
ページ19に含まれる内容の要旨
1.1 Incoming Call Features 1.1.1.2 Direct In Line (DIL) Description Provides automatic direction of an incoming trunk call to a preprogrammed destination. Each trunk has a destination for each time mode (day/lunch/break/night). [Method Flowchart] A trunk call is received. Does the call have its CLI* No information and is CLI mode enabled for the trunk and the time mode? Yes CLI works. Yes Is the CLI destination assigned? No No Is the DIL destination of the time mode assigned? Yes The call i
ページ20に含まれる内容の要旨
1.1 Incoming Call Features [Programming Example of DIL Table] The table can be programmed for each trunk. * CLI Destination Trunk No. Day Lunch Break Night Day Lunch Break Night 01 Enable Disable Enable Disable 101 100 101 100 02 Enable Disable Disable Disable 102 100 102 100 : : ::: ::: : * : DIL 1:1 Destination [450] Note Tenant number and VPS trunk group number can also be assigned in the DIL table. Tenant number is used to determine the time mode (day/lunch/break/night) for the correspondin
