Cisco Systems OL-24582-01の取扱説明書

ページ1に含まれる内容の要旨

APPENDIX
C
Technical Specifications
The following sections describe the technical specifications for the Cisco Unified IP Phone 6901 and
6911.
• Physical and Operating Environment Specifications, page C-1
� Cable Specifications, page C-2
� Network and Access Port Pinouts, page C-3
Physical and Operating Environment Specifications
Table C-1 shows the physical and operating environment specifications for the Cisco Unified
IP Phone 6901.
Table C-1 Physical and Operating Environment Specificati

ページ2に含まれる内容の要旨

Appendix C Technical Specifications Cable Specifications Table C-1 Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6901 (continued) Specification Value or Range Cables Category 3/5/5e for 10-Mbps cables with four pairs Category 5/5e for 100-Mbps cables with four pairs Note Cables have four pairs of wires for a total of eight conductors. Distance Requirements As supported by the Ethernet Specification, it is assumed that the maximum cable length betwee

ページ3に含まれる内容の要旨

Appendix C Technical Specifications Network and Access Port Pinouts Network and Access Port Pinouts Although both the network and access ports are used for network connectivity, they serve different purposes and have different port pinouts. � The network port is labeled network on the Cisco Unified IP Phone. � The access port is labeled Computer on the Cisco Unified IP Phone (Cisco Unified IP Phone 6911 only). Network Port Connector Table C-3 describes the network port connector pin

ページ4に含まれる内容の要旨

Appendix C Technical Specifications Network and Access Port Pinouts Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) C-4 OL-24582-01