ページ1に含まれる内容の要旨
Job Aid
Pre-Installation Information—
S8700 Media Server
Avaya™ S8700 Media Server with MCC1 or SCC1 Media Gateway
Avaya™ S8700 Media Server with G600 Media Gateway
This job aid provides the information, hardware requirements, and computer hardware and software specifications
necessary for installing an Avaya™ S8700 Media Server with either MCC1/SCC1 Media Gateways or G600 Media
Gateways. It covers the following items:
Required information
Site Requirements
Required hardware
Computer s
ページ2に含まれる内容の要旨
Job Aid Equipment Specifications This section provides specifications for the control network components and the media gateways. Control Network Components The Avaya S8700 Media Server control network components consist of the 2 media servers, the 1 or 2 Ethernet switch(es), and the 2 UPSs. See ‘‘Control Network Components Specifications’’. Control Network Components Specifications Dimensions Compenent English (in.) Metric (cm) Us (height in rack) Weight (lb/kg) Media Server 3.5h x 17d x 17w 9h
ページ3に含まれる内容の要旨
Job Aid Avaya MCC1 Media Gateway Installation requires 38 inches (97 centimeters) of clearance in the rear and at least 3 feet (91 centimeters) of clearance in the front of the cabinet to permit the door to open. Avaya SCC1 Media Gateway Installation requires 16 inches (41 centimeters) of clearance in the rear, and 3 feet (91 centimeters) of clearance in the front. Avaya G600 Media Gateway The Avaya G600 Media Gateway can be mounted at its midpoint by removing the mounting brackets and remoun
ページ4に含まれる内容の要旨
Job Aid Required hardware Before beginning the process, make sure you have the hardware listed in ‘‘List of Required Hardware—Control Network’’ and ‘‘List of Required Hardware—SCC1/MCC1 Media Gateways’’ or ‘‘List of Required Hardware—G600 Media Gateway’’on hand. List of Required Hardware—Control Network Comcode Description Number 700169246 Avaya S8700 Media Server 2 Powerware 9125 uninterruptible power supply (UPS) 2 408357002 – US & Canada 408427409 – International 700181928 – Japan Rail kit
ページ5に含まれる内容の要旨
Job Aid List of Required Hardware—SCC1/MCC1 Media Gateways Comcode Description Number J58890X-1, Avaya Media Gateway 1-44 List 1, 4 108774696 TN2312AP IP Server Interface circuit pack 1-44 700071251 IPSI Amphenol adapter (new installation only) 1/IPSI 700055015 TN799DP Control LAN circuit pack (if needed) 1-64 102631413 Control LAN Amphenol adapter (259A) 1/CLAN 108774696 TN2302AP IP Media Processor circuit pack 1-200 848525887 Media Processor Amphenol adapter 1/MedPro 700168727 Cable - IPSI to
ページ6に含まれる内容の要旨
Job Aid Computer specifications The computer used for configuring the hardware must have the following minimum specifications: Windows 95/98/NT4.0/2000/XP/ME operating system 32-MB RAM 40-MB available disk space RS-232 port connector Network interface card (NIC) with a 10/100 BaseT Ethernet interface Ethernet crossover cable (MDI to MDI-X) CD-ROM drive It must also have the following software installed: FTP program Telnet program Terminal emulation program (HyperTerminal or A
ページ7に含まれる内容の要旨
Job Aid Network Configuration A new network connection must be configured as follows: NOTE: Write down the original settings in case you need to change them back. Windows 95/98/NT4.0/ME 1. On your desktop right-click Network Neighborhood > Properties to display the Network dialog box. 2. In the window select the TCP/IP that corresponds to your Ethernet card. 3. Click Properties. 4. Select Specify an IP address: 5. IP address: 192.11.13.5 6. Subnet Mask: 255.255.255.252 7. Click OK, OK to accept
ページ8に含まれる内容の要旨
Job Aid 8 October 2002
