ページ1に含まれる内容の要旨
VoIP Intercom with
3CX Server Setup Guide
CyberData Corporation • 2555 Garden Road � Monterey, CA � 93940 � T:831-373-2601 � F: 831-373-4193
www.CyberData.net
ページ2に含まれる内容の要旨
2 1.0 Setup Diagram Figure 1-1 is a setup diagram for a single VoIP Intercom configuration. In this configuration, the Intercom acts as a standalone SIP telephony device. Figure 1-1. Setup Diagram CyberData VoIP Intercom Aastra 480i CT IP Phone 3CXSystem xxx.xxx.x.xx xxx.xxx.x.xx xxx.xxx.x.xxx (default) Windows Server NetGear EtherFast FS108P 10/100 8-port Pro-Safe Switch with PoE Server Setup Guide 930272B CyberData Corporation
ページ3に含まれる内容の要旨
3 2.0 Host PC Environment Table 2-1. Host PC Environment Details Description Hardware Type Windows Server Hardware Version Windows Server 2008 Software Type 3CX Phone System for Windows Software Version 6.1.0 3.0 Test Setup Equipment Table 3-1. Test Setup Equipment Equipment Model Version Aastra IP Phone 480i CT N/A Notes: CyberData VoIP Intercom 010935B 3.3.2 Notes: Linksys EtherFast 10/100 8-port Workgroup Hub N/A N/A Notes: Notes: Notes: Notes: Notes: Notes: Notes: Server Setup Guide 930272
ページ4に含まれる内容の要旨
4 4.0 Setup Procedure To set up the 3CX SIP Server for the CyberData VoIP Intercom, 1. Go to the web address of the Login page. The web address is determined by the customer. 2. On the Login page, type the user name and password into the User Name and Password fields. See Figure 4-2. The user name and password are determined by the customer. Figure 4-2. Login User Name Login Password Server Setup Guide 930272B CyberData Corporation
ページ5に含まれる内容の要旨
5 3. Click on the Login button to go to the Main Page. 4. On the Main Page under the “Complete the following steps to start using 3cx Phone System for Windows:” section, look for the section that has the text, “Click here to add an extension.” Figure 4-3. Main Page Click on here to add an extension. 5. Click on the word here to add an extension (Figure 4-3). This will take you to the Add Extension page. See Figure 4-4. Server Setup Guide 930272B CyberData Corporation
ページ6に含まれる内容の要旨
6 6. On the Add Extension page (Figure 4-4), type the following information: � Extension Number � First Name �Last Name � Email Address �Login ID � Password Figure 4-4. Add Extension Page 405 405 Extension Number First Name Last Name Email Address Password Next Login ID 7. Click the Next button. You will see the Extension Created page. See Figure 4-5. Server Setup Guide 930272B CyberData Corporation
ページ7に含まれる内容の要旨
7 Figure 4-5. Extension Created Page 405 405 405 405 8. To register the Intercom, you will need to enter the information from the 3CX Extension Created page into the Intercom by logging into the CyberData Configuration Home page. Log into the CyberData Configuration Home page (Figure 4-6) by pointing your browser to the Intercom’s IP address. For the initial configuration of the Intercom, refer to the VoIP Intercom Operation Guide PDF which can be found at the VoIP Intercom product page at: h
ページ8に含まれる内容の要旨
8 9. When prompted, enter the following Web Access Username and Web Access Password to access the CyberData Configuration Home page (Figure 4-6): Default Login: Web Access Username: admin Web Access Password: admin Figure 4-6. CyberData Configuration Home Page 000000 SIP Config 10. Click SIP Setup to open the SIP Setup page. See Figure 4-7. Server Setup Guide 930272B CyberData Corporation
ページ9に含まれる内容の要旨
9 11. Use the information from the Extension Created page (Figure 4-5) to enter the following information on the SIP Config page: �SIP Server � Remote SIP Port �Local SIP Port �SIP User ID � Authenticate ID � Authenticate Password � Dial-Out Extension (put the phone extension into this field) Note Figure 4-7 is an example of a CyberData VoIP Intercom that is configured to extension 405 and configured to call extension 409. Figure 4-7. SIP Config Page 405 405 405 409 Save Settings 12. Click Sav
ページ10に含まれる内容の要旨
10 13. After clicking on Save, a reboot timer countdown will begin. Figure 4-8. Intercom Reboot Timer Rebooting, please wait... 00:04 14. After the Intercom reboots, the green Status LED on the Intercom will blink at one second intervals to indicate normal operation. Note If Yes is selected for Speaker Beep After Initialization on the Intercom Setup page, you will hear a tone after the initialization sequence is complete. 15. To test the Intercom, complete the following steps: � Pick up any ph
ページ11に含まれる内容の要旨
11 5.0 Frequently Asked Questions Q: I upgraded my 3CX PBX server to 7.1 and now my Rev B CyberData VoIP Ceiling speaker and My VoIP Paging Amplifier do not stay registered with the server. A: There is a 3CX version 7.1 registration/timing bug. To correct this problem, complete the following steps: 1. Log into the 3CX PBX system, select Settings, and then select Advanced. See Figure 5-1. Figure 5-1. Select Settings and then Select Advanced Settings Advanced Server Setup Guide 930272B CyberDat
ページ12に含まれる内容の要旨
12 2. Select Custom Parameters, and then scroll down to select a parameter called NONCEEXPIRATION. See Figure 5-2. Figure 5-2. Select Custom Parameters and then Select NONCEEXPIRATION 1. Select Custom Parameters 2. Select NONCEEXPIRATION 3. Change value from 1 to 2. 3. Change the NONCEEXPIRATION parameter value from 1 to 2 and save the changes. See Figure 5-2. CyberData Corporation 930272B Server Setup Guide