ページ1に含まれる内容の要旨
®
Model RFDI
Wireless Doorbell and Intercom
Talk Button: Following the ringing of the Doorbell by
Overview
a guest, press and hold the Talk
The Wireless Doorbell and Intercom can determine
button to talk to the guest. Once the
who is at the door from anywhere in the house. The
link to the Doorbell is made, any
Doorbell and Intercom have up to a 1000' range and
other intercoms in the network
use a 900 Mhz secure digital radio link. The intercom
cannot hear the conversation.
is compatible
ページ2に含まれる内容の要旨
Assemble Program Intercom to Doorbell Intercom Step 1: On the doorbell, place Dipswitch #1 to the OFF position. Step 2: Press the Learn button on the intercom until a beep is heard. Step 3: Within 10 seconds press the Learn button on the doorbell until a beep is heard. Step 1: Install 4 AA Alkaline batteries (not provided). (Lithium batteries recommended for colder environments.) Mount Doorbell The doorbell can be mounted by using the included screws or by using the double-sided mounti
ページ3に含まれる内容の要旨
Mounting with Tape Program Additional Intercoms Step 1 The intercom can be programmed to at least one other intercom to become a network or it can be programmed into an existing network. Create New Network Clean back of doorbell and mounting surface using the alcohol wipe. Press the Learn button on the new intercom until a beep is heard. Within 10 seconds put the second Step 2 intercom into Learn Mode (refer to table below). INTERCOM LEARN MODE Press the Learn button until a beep is hear
ページ4に含まれる内容の要旨
Troubleshooting Intercom does not function. Check batteries in intercom. If using an AC Adapter ensure that it is plugged in. Ensure intercom is connected to a network. See Program. Ensure that intercoms are on the same channel. See Operation & Features. Intercom is not getting expected transmission Press and release the Talk button to verify network is range. complete. Keep antenna vertical. Keep intercom away from trees, metal objects and electrical wiring. Cell phones, Operation & Fea
ページ5に含まれる内容の要旨
Doorbell is not getting expected transmission Mounting Template range. Keep doorbell away from trees, metal objects and 1 3/8" electrical wiring. Do not mount doorbell on a tree, masonry, or metal surface. When used in buildings with stucco or cement walls, the range is greatly reduced. Doorbell beeps every ten minutes. The battery is low in the doorbell. Replace with AA Alkaline batteries. Need to clear doorbell’s memory. Press and hold Learn button, an initial beep will be heard. Continu
ページ6に含まれる内容の要旨
FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER: 1-800-528-9131 www.chamberlain-DIY.com NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer