ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 1-888-CRESTRON Rockleigh, NJ 07647 15 Volvo Drive
ページ3に含まれる内容の要旨
ST-DS Contents Docking Station/Charger: ST-DS 1 Description ................................ ................................ ................................ .......................... 1 Functional Description ................................ ................................ ........................... 1 ................................ ................................ ............................... 2 ................................ ................................ ...........................
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
ST-DS Description The ST-DS is a microprocessor-based docking station designed to fast charge the configurations and can take between two and three hours (depending on whether the ST-BTP is fully discharged and the amount of current drawn during the charging process). Each situation is detailed in “ Using the ST-DS to Charge the ST-BTP ” on page 4 . 1. The ST-DS charges the ST-BTP alone. 2. The ST-DS charges the ST-BTP while the rechargeable power pack is installed in a touchpanel and the touchp
ページ6に含まれる内容の要旨
ST-DS The ST-DS, shown on the next page, is housed in a black enclosure with silk- screened labels on the front panel and cavity (docking area) of the unit. On the front panel there are three LEDs for indicating the unit’s current status. The cavity accommodates either the ST-BTP with optional ST-DS charging guide or, in some cases, a Crestron wireless touchpanel with ST-BTP installed. The only wired connection is made to the bottom of the unit. There are four rubber feet on the base of the ST-D
ページ7に含まれる内容の要旨
ST-DS ST-DS Port ST-DS Power Port POWER ST-DS Indicators There are three LED indicators located on the front panel of the ST-DS. Refer to the illustration and descriptions after this paragraph. ST-DS Indicators This green LED illuminates when power is provided to the ST-DS via the specified external power pack. This red LED illuminates when a ST-BTP is inserted into the ST-DS cavity and the contacts of each touch. The LED remains ON while the rechargeable power pack is charging. If the CHG LED
ページ8に含まれる内容の要旨
ST-DS Setup The ST-DS has a DC power socket connector on the bottom of the unit. This power connector is used to supply power via an external power pack. Crestron recommends a power pack for the ST-DS. It is available under Crestron part number (110v USA and Canada) or (220v International). If an external power pack other than these Crestron models is obtained, verify that it Power Pack Specifications INPUT SPECS OUTPUT SPECS PW-1215 120VAC 60Hz 35W PWI-1215 230V~50Hz 35W 12V - - - 1500mA
ページ9に含まれる内容の要旨
ST-DS Charging the ST-BTP (Alone) Method 2: ST-BTP Installed in an Inactive Touchpanel NOTE: Do not use the optional charging guide when charging the ST-BTP while installed in the touchpanel. NOTE: This method only applies to certain Crestron wireless touchpanels. In this method, the ST-BTP is properly installed into the touchpanel. Position the touchpanel into the ST-DS cavity, as shown on the next page. Be sure that the contacts of the ST-DS and ST-BTP touch. The CHG LED illuminates while th
ページ10に含まれる内容の要旨
ST-DS Method 3: ST-BTP Installed in an Active Touchpanel This method is identical to method 2, except that the touchpanel is active (ON) while charging. As a result, the time to fully charge a discharged ST-BTP can take up to three hours. ST-BTP can be fully discharged while in the touchpanel. A button to fully discharge the touchpanel should be available within a designated screen design. This button has a special software identity (reserve join number) and can be recreated and programmed onto
ページ11に含まれる内容の要旨
ST-DS If after reviewing this Operations Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016. • In Latin America, call Crestron Latin America at +525-260-4336. For local support from exclusive Crestron factory-trained personnel
ページ12に含まれる内容の要旨
ST-DS 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, Cres
ページ13に含まれる内容の要旨
ST-DS Glossar ST-BTP is continually recharged before being fully discharged, the unit learns not to maintain a full charge. This can be avoided by fully discharging the ST-BTP The ST-BTP is a rechargeable power pack included with each Crestron wireless touchpanel that require one. ST-DS The ST-DS is a docking station and charger, which allows fast charging and trickle charging of the ST-BTP. The ST-DS optional charging guide is a template that properly positions a ST-BTP inside the ST-DS cavity.
ページ14に含まれる内容の要旨
ST-DS This page intentionally left blank. • • Glossary of Terms Operations Guide - DOC. 5738A 10 Crestron Docking Station/Charger
ページ15に含まれる内容の要旨
ST-DS This page intentionally left blank. Operations Guide - DOC. 5738A • • 11 Docking Station/Charger: ST-DS /Charger Docking Station Crestron
ページ16に含まれる内容の要旨
Crestron Electronics, Inc. Operations Guide – DOC. 5738A 15 Volvo Drive Rockleigh, NJ 07647 Specifications subject to www.crestron.com change without notice. Fax: 201.767.7576 Tel: 888.CRESTRON 04.01
ページ17に含まれる内容の要旨
ST-DS Operations Guide - DOC. 5738A • • 13 Docking Station/Charger: ST-DS /Charger Docking Station Crestron
