ページ1に含まれる内容の要旨
P12
Warranty
BATTERY CHARGER REMOTE
Scan for
additional
Instructions
product
Register your P12 Remote Display at bluesea.com/warranty
information
PN 7520 / PN 1521
Blue Sea Systems stands behind its products for as long as you own them. Blue Sea
Indicates battery charger stage, alerts, and controls basic
Systems will replace or issue a credit for any of its products found to be defective in
battery charger functions
materials or manufacture. P12 Battery Chargers and P12 Remote Displays are
ページ2に含まれる内容の要旨
Display Indicators 4. Charge Output P12 1. Charging CHARGING 7520 BATTERY CHARGER REMOTE 5. Thermal Regulation and Charge Stage Charge Output Alert 2. Charge Stage 6. Internal Temperature Sensor BULK 100% BULK ABSORB ABSORB 75% 7. Battery Temperature Sensor PREFLOAT PREFLOAT 50% 8. Fan FLOAT 1 2 3 EQUALIZE DC 9. DC Fuse FLOAT 25% EQUALIZE 10% AC 10. AC Input Voltage 3. Fan Mode Fan Mode Too High or Low QuickGuide <5% OFF LOW HIGH 1 2 3 11. Reverse Polarity or Short Circuit DIM / OU
ページ3に含まれる内容の要旨
Alerts and Diagnostics 5. Thermal Regulaton: SOLID ON (Yellow): The charger temp output limit LED indicator will blink to notify the user that the charger is limiting its output to protect itself from eventual overheating. The most common correction for this state is to increase the fan speed to High. If the fan speed is already set to High check for blockage around the fan vent that can be removed. If the condition persists, it is advisable to reposition the battery charger in a cooler,
ページ4に含まれる内容の要旨
Cable Connection The P12 Battery Charger Remote uses one Cat5e cable for communication and power. P12 Battery Charger Remote P12 Battery Charger RJ45 Port Dimensioned Drawing 0.57" (14.36mm) 4.15" (105.46mm) 2.52" 3.01" (63.88mm) (76.56mm) 2.90" 0.38" (73.70mm) (9.65mm) Mounting Hole Cutout Ø1-1/4" (31.75mm) Clearance holes for #6 screws 1.50" (38.10mm) Blue Sea Systems Inc. 425 Sequoia Drive Bellingham, WA 98226 USA p 360.738.8230 3.69" f 360.734.4195 (93.66mm) co
