ページ1に含まれる内容の要旨
Model: VF03
ページ2に含まれる内容の要旨
Dear Customer, Thank you for purchasing the Verilux Brookfield™ ® Deluxe Natural Spectrum Floor Lamp. You have received a quality product, backed by a one- year limited warranty. As a Verilux customer, your satisfaction means everything to us. We look forward to serving you now and in the future. Many other healthy lighting products are available through our catalog and online. Visit us on the web at www.verilux.com to request a free catalog and learn more about all our quality Verilux pr
ページ3に含まれる内容の要旨
READ ALL INSTRUCTIONS BEFORE USING Important Safeguards DANGER: • Do not operate this device near a water sour ce to avoid electr ocution. WARNING: • Do NOT dismantle. • Do not use with power supply voltage other than 120 V AC. • Do not operate lamp in close pr oximity to flammable or combustible vapors, such as aerosol spray products, or where oxygen is being administered. • Do not cut or shorten the power cor d. • The bulb in this pr oduct contains a trace amount of mer cury , a ch
ページ4に含まれる内容の要旨
Getting Started Main Parts & Controls ® A. Optix Glare Control Filter G. Lower Shaft B. Switch H. Lamp Base C. Lamp Head Swivel Knob I. Power Cord D. Lamp Arm J. Power Supply (Ballast) E. Height Adjusting Collar K. Bulb F. Upper Shaft D Close-up of Lamp Head A C B E K F B A G I H J CAUTION: CAUTION: DO NOT LIFT THE LAMP BY THE LAMP ARM. THE LAMP SHOULD BE LIFTED BY THE VER TICAL SHAFT . 4
ページ5に含まれる内容の要旨
Assembly Instructions Please Read Operating Instructions Carefully Before Using the ® Heritage™ Deluxe Natural Spectrum Floor Lamp: 1. Set lamp base on the floor and insert the lower lamp shaft (G) onto the base and screw clockwise to tighten (Fig.1). 2. Pull the slack of the electrical cord through the lamp base (I). D 3. Loosen the height adjusting collar (E) to free lamp arm (D). E 4. With one hand holding the lamp arm (D), screw the upper shaft (F) onto the lower shaft (G) (see assem
ページ6に含まれる内容の要旨
Assembly Instructions — continued ® 7. Attaching the Optix glare control filter: • Remove glar e contr ol filter fr om protective plastic bag. Take care to hold filter by the edges only. • Insert tabs on bottom of filter into opening. (Fig. 2) • Pr ess into place using Note: Do not thumb tab. touch material Do not touch or press on the filter material itself. Fig. 2 8. Attach the ballast to the power cor d. Use car e to align the 4-pin plug pr operly . DO NOT FORCE. The 4
ページ7に含まれる内容の要旨
Adjusting the Heritage™ Floor Lamp The Heritage Floor Lamp D adjusts several ways: 1. To adjust lamp height – hold upper Height shaft (F) with one hand, loosen height adjusting adjusting collar. Raise or lower lamp collar arm (D) to desired height. Tighten collar (Fig. 5). F Note: Do not stand on cord or otherwise restrict its movement while raising or Fig.5 lowering the height of the lamp. 2. To rotate the lamp head right or left, loosen height adjusting collar, swing lamp arm to de
ページ8に含まれる内容の要旨
Bulb Replacement Instructions Removal C D 1. Unplug lamp fr om power sour ce. ® 2. T o access the bulb, r emove Optix glare control filter by depressing the thumb tab and lifting it out. 3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in an B outward motion (Fig. 9). Installation 1. Unplug lamp fr om power sour ce. A 2. Firmly hold base (B) and push bulb (C) into the socket (A). Fig. 9 3. Be sure bulb is firmly seated in the socket (see below) and snapped into the m
ページ9に含まれる内容の要旨
Troubleshooting ® Before requesting service on your Verilux lamp, please read the following: • Make sur e all power connectors, cor ds and plugs ar e inserted fully and securely. • Be sur e the bulb is secur ely seated into the socket (see page 8). • Make sur e ther e is power to the wall outlet or try another outlet. PROBLEM CHECK SOLUTION Has the plug come Insert plug securely into wall outlet. loose? Light Won’t Is the bulb old? Check bulb for blackening/darkening at bottom of spiral wh
ページ10に含まれる内容の要旨
Care and Cleaning Your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit and allowed sufficient time for the unit to cool. All liquid should be properly wiped away and dried prior to restoring power. CAUTION: CAUTION: DO NOT USE SOL VENTS OR CLEANERS CONT AINING ABRASIVES, OR AMMONI
ページ11に含まれる内容の要旨
One Year Limited Warranty ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT W AS PURCHASED FOR REP AIR OR REPLACEMENT! Many questions may be answered by visiting www.verilux.com, or you may call our Customer Service Department at 1-800-786-6850 during normal business hours. This limited warranty is provided by: Verilux, Inc., 340 Mad River Park, Waitsfield, VT 05673 Verilux warrants this product to be free from defects in material and workmanship for a period of
ページ12に含まれる内容の要旨
Printed in China for Verilux, Inc. VF03-MAN-Rev8 © Copyright 2011 Verilux, Inc. All rights reserved.
