ページ1に含まれる内容の要旨
Model: VF01
ページ2に含まれる内容の要旨
Dear Customer, Thank you for purchasing the Verilux Original Natural ® Spectrum Floor Lamp. You have received a quality product, backed by a one year limited warranty. As a Verilux customer, your satisfaction means everything to us. We look forward to serving you now and in the future. Many other healthy lighting products are available through our catalog and online. Visit us on the web at www.verilux.com to request a free catalog and learn more about all our quality Verilux products, or
ページ3に含まれる内容の要旨
READ ALL INSTRUCTIONS BEFORE USING Important Safeguards DANGER: • Do not operate this lamp near a water sour ce to avoid electr ocution. WARNING: • Do NOT dismantle. • Do not use with power supply voltage other than 120 V AC. • Do not operate lamp in close pr oximity to flammable or combustible vapors, such as aerosol spray products, or where oxygen is being administered. • Do not cut or shorten the power cor d. • The bulb in this pr oduct contains a trace amount of mer cury , a ch
ページ4に含まれる内容の要旨
VEUILLEZ LIRE L’INTÉGRALITÉ DES INSTRUCTIONS AVANT TOUTE UTILISATION Mesures de sécurité importantes DANGER : • N’utilisez pas cet appar eil à pr oximité d’une arrivée d’eau pour éviter tout risque d’électr ocution. AVERTISSEMENT : • A vant de brancher la lampe, vérifier que la tension de la prise murale ne dépasse pas 120 volts. • Ne P AS utiliser de pr oduit lubrifiant lors de l’assemblage; voir la section de dépannage en cas de dif ficulté lors de l’assemblage de la lampe. • Ne pa
ページ5に含まれる内容の要旨
Getting Started Main Parts & Controls F. Polarized Plug A. Lamp Head G. Parabolic Grid Diffuser B. Gooseneck H. Bulb C. Shaft I. High/Off/Low Switch D. Lamp Base E. Power Cord Close-up of Lamp Head B A H I C G E D F CAUTION: DO NOT LIFT THE LAMP BY THE GOOSENECK. THE LAMP SHOULD BE LIFTED BY THE SHAFT. MISE EN GARDE : NE PAS SOULEVER LA LAMPE PAR SON COL-DE-CYGNE. LA LAMPE DOIT ÊTRE SOULEVÉE PAR LA TIGE. 5
ページ6に含まれる内容の要旨
Unpacking Your Lamp 1. Remove all pieces fr om box. Locate 2 Phillips head scr ews. 2. Detach red plastic pieces and store them in the event you need to return the lamp. 3. Important: To avoid scratching the metal shaft, do not use a sharp object to cut the plastic covering. The clear plastic covering on the shaft is specially designed to tear away easily. IMPORTANT NOTE: Remove red plastic protective pieces prior to assembly. 6
ページ7に含まれる内容の要旨
Assembly Instructions Read Instructions Carefully Before Assembly: 1. Connect the two ends of the Power Cord (between the Base and the Shaft) using the lock connectors. 2. Carefully tuck excess Power Cord into the Shaft. DO NOT CUT OR WARNING: SHORTEN THE POWER CORD. 3. Insert the Gooseneck and the Shaft into the Base. 4. Check direction of the lamp and the hole on the Base, then use a Phillips Head Screwdriver (not included) to tighten the screw into th
ページ8に含まれる内容の要旨
Assembly Instructions — continued 5. To prevent damage during shipping, the Verilux bulb is surrounded by protective padding. Carefully remove and dispose of the protective padding. Check to ensure that the bulb is fully seated and has not come loose from the socket during shipping. There should be no gap between the bulb and socket. 6. Attaching the Parabolic Grid Diffuser: • Remove grid dif fuser fr om pr otective plastic bag • Insert plastic pegs at bottom of grid dif fuser i
ページ9に含まれる内容の要旨
Bulb Replacement Instructions Installation 1. Unplug lamp from power source. C 2. Firmly hold base (B) and push bulb (C) into the socket (A). 3. Be sure bulb is firmly seated in the socket (see below) and snapped into the metal bulb clip (D). B A 4. Replace grid diffuser. Removal C 1. Unplug lamp from power source. 2. To access the bulb, remove grid diffuser by depressing the tab and lifting it out (see page 8). 3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in B A
ページ10に含まれる内容の要旨
Troubleshooting ® Before requesting service on your Verilux lamp, please read the following: • Make sur e all power connectors, cor ds and plugs ar e inserted fully and securely. • Be sur e the bulb is secur ely seated into the socket (see page 9). • Make sur e ther e is power to the wall outlet or try another outlet. • CAUTION: DISCONNECT LAMP BEFORE PERFORMING ALIGNMENT ACTIVITY. MISE EN GARDE : DÉBRANCHER LA LAMPE A V ANT D’EFFECTUER SON ALIGNEMENT . Correct
ページ11に含まれる内容の要旨
Care & Cleaning Your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp, using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit, and allowed sufficient time for the unit to cool. All liquid should be properly wiped away and dried prior to restoring power. CAUTION: DO NOT USE SOLVENTS OR CLEANERS CONTAINING ABRASIVES, OR
ページ12に含まれる内容の要旨
One Year Limited Warranty ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT! Many questions may be answered by visiting www.verilux.com, or you may call our Customer Service Department at 1-800-786-6850 during normal business hours. This limited warranty is provided by: Verilux, Inc., 340 Mad River Park, Waitsfield, VT 05673 Verilux warrants this product to be free from defects in material and workmanship for a period of o
