ページ1に含まれる内容の要旨
Screw-In Dimmer Model LS-318
1. INTRODUCTION 3. PROGRAMMING TRANSMITTERS (TC SERIES)(CONT)
TM
Thank you for your purchase of a SkylinkHome Screw-In Dimmer, Model 1. Switch off the Screw-In Dimmer
LS-318. This receiver module allows you to wirelessly turn on and off, with light bulb by the wall switch.
TM
dim and brighten connected light with a SkylinkHome transmitters.
The Screw-In Dimmer LS-318 can communicate with up to 8 transmitters,
so user has the option to add more transmitt
ページ2に含まれる内容の要旨
4. SET TIMER DURATION (CONT) 5. REGULAR OPERATING MODE (CONT) 3. Press and hold the SET button for 3 seconds, the red LED will flash once. On / Off Mode Operation The number of flashes indicates the timer duration: The Screw-In Dimmer allows on / off operation, when the programmed button is activate, it will transmit a signal to toggle the status of the light CAUTION status. For example, if a toggle signal is received when the light is off, that DO NOT TOUCH ANY METAL PARTS WHILE PRESSIN
ページ3に含まれる内容の要旨
7. COUNTDOWN TIMER OPERATING MODE 10. FCC The Remote Control is approved by the FCC and it complies with Part 15 of the If a Countdown Timer Mode transmitter or sensor is activated, the light FCC Rules. Its operation is subject to the following two conditions : connected to the Screw-In Dimmer will be on for the predetermined time 1. This device may not cause harmful interference. Interval. During the timer count down, the red LED on the Screw-In 2. This device must accept any interferenc