ページ1に含まれる内容の要旨
3-866-295-12(1)
Remote
Commander
Operating Instructions
RM-LJ302
1999 by Sony Corporation
ページ2に含まれる内容の要旨
} ] ] } } ] Precautions Before You Use Your Remote On safety Should any solid object or liquid fall into the cabinet, unplug the Check that you received the following item with the receiver and have it checked by qualified personnel before remote: operating it any further. LR6 (size-AA) alkaline batteries (3) On operation Before connecting other components, be sure to turn off and Inserting batteries into the remote unplug the receiver. Insert three LR6 (size-AA) alkaline batteries with the + O
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Understanding the 2 way remote system Location of Parts and Basic Remote This remote operates under a 2 way remote system. With the two way remote system, the component responds to Operations 4 signals sent from the remote by sending additional signals Parts Description 4 (information about the status of the component, text data, etc.) back to the remote. Thus, operations are performed as a result of communication between the remote and the Using the Lists 12 component. Char
ページ4に含まれる内容の要旨
SET UP Parts Description Location of Parts and Basic Remote 2 Operations AV 1/u SYSTEM STANDBY 3 1 FUNCTION This chapter provides information on 7 9 the location of buttons and how to use 8 them to perform basic operations. PUSH ENTER !Á
0 SUB »
á
Pp =+ 0) CH/PRESET/D.SKIP – + BASS MASTER BOOST VOL + MUTING 4 – 6 Open up the cover. v 0 MENU SUB GUIDE LEVEL 1 2 3 ++ CENTER REAR 4 5 6 –– TEST TONE EQ/TONE 7 8 9 CURSOR SHIFT D.TUNING MODE SLEEP >10 0 5 - / - - ENTER EXIT/RETURN EXECUTE 4 SOUND F
ページ5に含まれる内容の要旨
Location of Parts and Basic Remote Operations 1 AV 1/u switch 8 FUNCTION button Press to turn on or off the components that the remote Press to display the function (component) list. Press is programmed to operate. For details on again to revert back to the component information. programming procedure, see“Programming the Remote” on page 16. See the table on page 9 for information on the buttons you can use to control each component. 2 Display window The current status of the selected component
ページ6に含まれる内容の要旨
Location of Parts and Basic Remote Operations SET UP Parts Description !ª Tape/disc operation buttons The following table shows what components are operated by each button and the function of the buttons. Button(s) Component(s) Function á VCR, DVD player, Starts play of the LD player, video CD playback medium AV 1/u SYSTEM STANDBY player, tape deck, MD deck, CD player, DAT deck FUNCTION » Tape deck Starts play on the reverse side of the cassette PUSH ENTER P VCR, DVD player, Pauses play or recor
ページ7に含まれる内容の要旨
Location of Parts and Basic Remote Operations !¤ EQ/TONE button @¼ D.TUNING ENTER button Press to turn the equalizer or tone effect on or off. The TONE indicator on the receiver lights up when the If you have selected tuner: effect is turned on. Press to enter Direct Tuning mode. For details on Note that if you have adjusted the equalization or tone Direct Tuning procedure, refer to the Operating using the CURSOR MODE button and cursor buttons, Instructions supplied with your receiver. the adj
ページ8に含まれる内容の要旨
Location of Parts and Basic Remote Operations SET UP Parts Description @£ MENU button When you have selected the VCR, DVD player, or SAT tuner, press this buton to display VCR, DVD, or SAT menu on the TV screen. Then use the cursor buttons to perform the menu operations (see “!¥ Cursor buttons (V/v/B/b),” “EXECUTE button,” and “EXIT/RETURN button” on page 7). AV 1/u SYSTEM STANDBY Note When you have selected VCR, the remote is set to control the FUNCTION VCR that corresponds with VCR 1 after yo
ページ9に含まれる内容の要旨
Location of Parts and Basic Remote Operations Table of buttons used to control each component When you program the remote to control the following Sony or non-Sony components, you can use the buttons on the remote that are marked with circles. Note, however, that some buttons may not operate your component. Component VCR (VHS, Satellite DVD LD player TV Cable Tuner Video CD CD MD DAT deck Tape deck Beta, tuner player box player player deck (A and B) 8mm) Button AV 1/u r r r r r r r r r SUB* rr
ページ10に含まれる内容の要旨
Location of Parts and Basic Remote Operations Parts Description Table of operations that appear when you press the SUB button Press the SUB button to display a list of operations that the corresponding buttons are not found on the remote. The contents of the lists will vary according to the currently selected component. The following table shows the items in each list and the function of each item. Component Item(s) Function Component Item(s) Function a) VCR Starts recording LD player SIDE A S
ページ11に含まれる内容の要旨
Location of Parts and Basic Remote Operations z To perform title and set up menu operations on the DVD Component Item(s) Function player MD deck CONTINUE Selects Continuous Play 1 Select the DVD player from the function list. SHUFFLE Selects Shuffle Play 2 Press SUB. PROGRAM Selects Program Play REPEAT Selects Repeat Play 3 Move the easy scroll key to select “TITLE” (for the title menu) or “MENU” (for the set up menu), then press the key to enter DISPLAY Changes the information on the selection.
ページ12に含まれる内容の要旨
SET UP Using the Lists This chapter describes how to display and use various lists. It also includes a chart showing all of the various lists. AV 1/u SYSTEM STANDBY FUNCTION SOUND SET UP FIELD FUNCTION PUSH ENTER Easy scroll key SUB »
á
Pp =+ 0) CH/PRESET/D.SKIP – + BASS MASTER BOOST VOL + MUTING – Brief descriptions of buttons for list operations SOUND FIELD button: Press to display the sound field list. Press again to revert back to the component information. FUNCTION button: Press to di
ページ13に含まれる内容の要旨
Using the Lists Chart of Lists See the treelike chart below for the list hierarchy. Details on how to access each list is given from page 14. Some items have sub-lists that appear when you press the SUB button (see pages 10 and 11). The configuration of the lists will vary depending on the receiver. VIDEO1 VIDEO2 . . . (or TAPE/MD) TAPE Deck A/B status information Press CD Disc memo list* FUNCTION TUNER Preset station list PHONO . . . USER1 USER2 MACRO1 MACRO2 SUB ROOM** Press SOUND FIELD Soun
ページ14に含まれる内容の要旨
Using the Lists Selecting a Component Basic procedure for selecting a component Additional procedures after selecting a component Do the procedure below to select a component from the function list. Note that the components contained in the list will vary depending on the receiver. If you have selected tuner Do the procedure below after you have selected the tuner. 1 Press FUNCTION. The function list appears. The items in the list 1 Move the easy scroll key. correspond with the jacks on the re
ページ15に含まれる内容の要旨
Using the Lists Selecting a Sound Field If you selected the tape deck Do the procedure below to select a sound field from the Move the easy scroll key to display the information about sound field list. Note that the sound fields contained in deck A or B. each list will vary depending on the receiver. Note 1 Press SOUND FIELD. When the remote is programmed to control a non-Sony tape The sound field list appears. deck, the following may occur: — The information about deck B is not displayed and y
ページ16に含まれる内容の要旨
Using the Lists Programming the Remote You can customize the remote to match the components 5 Move the easy scroll key to select the make of the connected to your receiver. You can even program the component (“Kenwood,” for example), then press remote to control non-Sony components and also Sony the key to enter the selection. components that the remote is normally unable to control. The procedure below uses as an example a case in which a When programming the remote to control Kenwood LD playe
ページ17に含まれる内容の要旨
Using the Lists Performing Several Commands in Sequence 5 Move the easy scroll key to select the component Automatically (Macro Play) category (“VTR” for example) then press the key to enter the selection. The Macro Play function lets you link several IR codes in The MAKER list appears. a sequential order as a single command. The remote provides 2 macro lists (MACRO 1 and 2). You can specify MAKER? up to 8 IR codes for each macro list. Sony VTR1 Sony VTR2 Setting the sequence of IR codes 6 Mov
ページ18に含まれる内容の要旨
Using the Lists Performing Several Commands in Sequence Downloading Data From Automatically (Macro Play) the Receiver Starting macro play The remote communicates with the receiver every time a button is pressed on the remote and displays the current 1 Press FUNCTION. operation status of the receiver on the display window. The function list appears. The remote can also download index names of the program sources, preset stations, CD memos*, and C D information indicating the presence or absenc
ページ19に含まれる内容の要旨
Using the Lists To download CD memos and information on Note on downloading CD memos from the presence or absence of a CD in each slot the CD players of a CD changer You can download CD memos only from the 1 Move the easy scroll key to select “CD MEMO,” CONTROL A1/A1 -compatible Sony CD players. then press the key to enter the selection. Depending on the CD player setting, it may take The SORT menu appears in the display. several minutes to download CD memos. For faster transmission, make the f
ページ20に含まれる内容の要旨
Using the Lists Other Operations Turning the backlight on or off Using the auto power function Each time you press a button on the remote, the backlight With the auto power function turned on, the commander turns on. If you do the procedure below to turn off the sends numerous codes to the appropriate Sony AV backlight, you can make the batteries last longer. components when you select a video function. Automatically, the components you have done IR setting 1 Press SET UP. turn on and the TV sw
