ページ1に含まれる内容の要旨
English Español
F F Four Light Fixt our Light Fixt our Light Fixtur ur ure e e
Owner’s Guide and Installation Manual
Manual De Propietario
Form# 43553-01
20090515
©2009 Hunter Fan Co.
ページ2に含まれる内容の要旨
Welcome Your new Hunter light fixture is an addition to your home or office ® For Your Records and that will provide comfort and performance for many years. This Warranty Assistance For reference, also attach your receipt or a copy installation and operation manual gives you complete instructions for of your receipt to the manual. installing and operating your light fixture. __________________________________________ We are proud of our work. We appreciate the opportunity to supply Model Nam
ページ3に含まれる内容の要旨
Installation Methods of Hunter® Ceiling Fans Type A-Z Your ® light fixture can be installed in one of three ways, depending on the type of switch housing. The steps in this manual include instructions for all three installation methods: Fans with removeable switch housings, fans with non-removeable switch housings, and The Hunter Original. Preparing the Light Fixture Removable Switch Housing 1. Shades are not included with this light fixture. Be sure to purchase shades for yo
ページ4に含まれる内容の要旨
1 • Installing the Light fixture on Fans With Removable Switch Housings 1. Unscrew the three screws from the upper switch housing. Disconnect the 9-pin plug connectors. Remove the lower switch housing. 2. Push the plug button from inside the lower switch housing to remove the plug button and switch housing cap. NOTE: Save the plug button and switch housing cap should you choose to remove the light fixture in the future. 3. Feed the two wires from the light fixture through the center hole in
ページ5に含まれる内容の要旨
1 • Installing the Light fixture on Fans With Removable Switch Housing (Continued) 7. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here” or “For Light Use.” To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist the wire connector clockwise until tight. Connect the black wire with a white stripe from the switch Wires housing to the black wire from the light fixture. Connect the and Wire whi
ページ6に含まれる内容の要旨
2 • Installing the Light fixture on Fans With Non-Removable Switch Housings 1. Uninstall the two attachment screws from the switch housing cover. 2. Remove the plug or screw from the center of the switch housing cover. 3. Thread the switch housing cover onto the light fixture. Align the screw holes in the light fixture with the screw holes in the switch housing cover. 4. Use the two attachment screws removed from the lower switch housing and the lock washers on the red tag of the light fixtur
ページ7に含まれる内容の要旨
2 • Installing the Light fixture on Fans With Non-Removable Switch Housings Cont. 9. Attach the light fixture to the switch housing with the two screws included with the light fixture, aligning the holes in the light fixture, switch housing cover, and switch housing. 10. Securely tighten the two screws. 11. Go to the instructions for Installing the Bulbs and Shades. Wires and Wire connectors Steps 8-9 7 43553-01 • 05/15/09 • Hunter Fan Company
ページ8に含まれる内容の要旨
3 • Installing the Light fixture on the Hunter Originals 1. Uninstall the two screws from the switch housing plate. NOTE: Save the switch housing plate should you choose to remove the light fixture in the future. 2. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here” or “For Light Use.” One wire is white and the other wire is black wire with a white stripe. Thread the two wires through the hole in the center of the light fixture. 3. To connect t
ページ9に含まれる内容の要旨
4 • Installing Bulbs and Shades 1. Install four purchased shades for the light fixture. For each light, loosen the three thumbscrews in the shade cup. Place the shade into the shade cup and tighten the thumbscrews. 2. Install the included CFL light bulbs. 3. The installation is complete and you can restore power to the Thumbscrews ceiling fan. Shade Cup Steps 1– 3 CFL bulb (included) 9 43553-01 • 05/15/09 • Hunter Fan Company
ページ10に含まれる内容の要旨
5 • Troubleshooting Troubleshooting Light does not come on. 1. Make sure bulbs are installed properly. 2. Make sure breakers or fuses are on. 3. Verify that the light power lead is connected at the ceiling. Refer to your ceiling fan manual for locating assembly and wiring. Glass rattles. 1. Make sure the glass shades are secure. If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936)or visit us at our Web site at http://www.hunterfan.com. Hunter Fan
