Home Automation 59A00-1の取扱説明書

ページ1に含まれる内容の要旨

HAI UPB™ Lamp Module
Installation and Operating Instructions

For the following Models:

59A00-1 HAI 300W Lamp Module

READ THESE INSTRUCTIONS BEFORE INSTALLING DEVICE

This HAI UPB™ Lamp Module is intended for installation in accordance with the National Electrical Code and local codes and
regulations. Retain these instructions for reference.

ページ2に含まれる内容の要旨

INSTALLATION INSTRUCTIONS The HAI UPB™ Lamp Module is simply plugged into a standard 120VAC wall outlet. Load Information The total load of the UPB™ controlled outlet must not exceed 300 Watts. HAI LAMP MODULE OPERATION The HAI Lamp Module has many configurable items that can be set using the UPB™ UPStart configuration software. The following describes the operation of the HAI Lamp Module in its factory default configuration. Lamp Switch Trigger Operation The Lamp Modu

ページ3に含まれる内容の要旨

SPECIFICATIONS Incandescent Loads Dimming Yes Inductive Loads Dimming No Fluorescent Loads Non-Dimming Yes (configurable) Power Maximum Dimming 300W Current Maximum Non-Dimming 2.5A Connections Standard receptacle LED Indicator Yes Dimensions 3” x 2” x 1.3” Weight 0.25 lb. Mounting Plug-in Input Power 120 ± 12 VAC Input Frequency 60 ± 3 Hz Operating Temperature -40 °F to 104 °F LIMITED WARRANTY HAI warrants this product against defects in material and workmanship, und