ページ1に含まれる内容の要旨
DEH40212 Installation Instructions
GE Total Lighting Control
ProSys Lighting Control System
Catalog Number RINTERxxxPS(P)
ProSys™ Lighting Control System Relay Panels
RINTER2424PSP 24-Relay Interior shown with RTUB24
DESCRIPTION
The ProSys Lighting Control System is a small network of This instruction sheet will show you how to:
relay panels and occupant control switches linked by a 4-wire
1. Install the Relay Panel(s)
dataline. Together, these devices form a reconfigurable
2. Install and Test t
ページ2に含まれる内容の要旨
DEH40212 Installation Instructions CAUTION: Make sure all power is OFF before wiring. Do not energize wiring until the unit is fully assembled. Conform to all applicable codes. RELAY PANEL INSTALLATION SWITCHED LIGHTING CIRCUITS Figure 1 1.5" x 1.5" CROSSOVER WIRING CHANNEL (TOP AND BOTTOM) 2" TYP. Dimensions (A x B) RINTER1212PS(P) 16.0" (406mm) x 16.5" (419mm) RINTER2424PS(P) 22.5" (572mm) x 24.0" (610mm) RINTER4848PS(P) RELAYS RELAYS CLASS 2 36.0" (914mm) x 24.0" (610mm) LOW-VOLTAGE WIRING SE
ページ3に含まれる内容の要旨
DEH40212 Installation Instructions POWER UP AND TEST RELAYS 1. Apply power to the power supply only. As shown in LED INDICATOR Figure 3, to the right, press the Relay Control Button next Figure 3 to each relay’s yellow plug-in termination to toggle it ON/ OFF. The relay should “click” and the LED status indicator RELAY CONTROL should change state. Confirm the operation by measuring BUTTON TO RELAY the continuity at the line-voltage terminations of each RR7P RELAY SHOWN relay. 2. Apply power to t
ページ4に含まれる内容の要旨
DEH40212 Installation Instructions DATALINE INSTALLATION GLOBAL (PANEL-TO-PANEL) DATALINE PANEL 01 PANEL 02 PANEL XX The dataline connects the relay panels, switches and optional control modules. Within the 4-wire dataline are two twisted pairs: the red and black wires, carrying data; and the blue and white wires, providing power to the dataline switches and control modules. For simplicity, we refer to a 4-wire dataline running between a relay panel and the dataline switches as a “Local Dataline
ページ5に含まれる内容の要旨
DEH40212 Installation Instructions HARDWIRE LOW-VOLTAGE SWITCHES (OPTIONAL) Each of the ProSys panel’s eight channels has a single switch input which will accept any of the dry-contact configurations Figure 7 – Hardwired Switch Configurations shown in Figures 6 and 7, and also provides status feedback RED/BLACK JUMPER for that channel. ProSys panels whose catalog numbers end in “P” also include MAINTAINED ISOLATED CONTACT inputs for each relay. Like the channel inputs, these support R B Y
ページ6に含まれる内容の要旨
DEH40212 Installation Instructions GE Total Lighting Control GE Total Lighting Control 41 Woodford Avenue, Plainville, CT 06062 ©2000 General Electric Company DEH40212 BL 0700 R02 6
