ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Step 4 Procedure for wall mounting Lift the towel rail now with the inner sleeve assembly in position, and Step 1 align with the outer sleeve previously fixed to the wall. When all four A inner sleeves are inserted correctly into the outer sleeves of the brackets tighten each nut fully. Replace the cap ‘Y’ and the hex. stud screw. The distance the towel rail can be positioned from the wall can be varied by adjusting the hex. stud screws. When in the desired location, tighten fully to secure the
ページ3に含まれる内容の要旨
Operation (Electrical) Heat will be distributed along each of the rails. Some variation in the temperature across the surface of the rail is also normal. When the appliance is covered the heating pattern of the rails may alter slightly. Cleaning The finish on your towel rail can be maintained by occasionally wiping over with a damp cloth and lightly finishing with a soft dry cloth. This should only be carried out when the rail is cold. Do not use abrasive cleaning powders as this could damage
ページ4に含まれる内容の要旨
Recycling For electrical products sold within the European Community. At the end of the electrical products useful life it should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice in your country. After Sales Service Your product is guaranteed for two years from the date of purchase. Within this period, we undertake to repair or exchange this product free of charge (subject to availabilitiy) provided i
