ページ1に含まれる内容の要旨
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
MODEL # 1638CT
Providence Ridge Travel System
Instruction Manual
Convenience through Innovation and thoughtful design 11.06
ページ2に含まれる内容の要旨
WARNINGS WARNING: Please follow all of these instructions to ensure the safety of your child. Keep these instructions for future reference. WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out. Always use the seat belt and insure that the child is properly positioned according to these instructions. WARNING: Never leave child unattended. * Purses, shopping bags, parcels, diaper bags or ac
ページ3に含まれる内容の要旨
PARTS Child Tray Base Parent Tray Locking Cap Rear Wheels Hub Cap Rear Axle Assembly Stroller Solid Cap Front Wheels F r ont W h e e l s Car Seat C a r S e a t TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. TO ASSEMBLE STROLLER * Remove stroller from box. The front wheels, rear wheels, and child tray, and parent tray need to be installed prior to use. * To attach the front wheels, slide the red unlock mecha
ページ4に含まれる内容の要旨
* To attach the front child tray, push the angled tray onto the post at the end of the right armrest, while pressing downward on the snap button, until locked into place. Please see figure 7. Rotate the tray downward until latched onto the left armrest. Please check that the snap button comes through and securely latches the tray in place. Please see figure 8. * To remove front child tray, press inward on the left side tray release button and rotate upward on the tray. Please see figure
ページ5に含まれる内容の要旨
TO SECURE THE CHILD • The shoulder straps of the 5-point harness have 3 attachment positions. Select the position that places the shoulder strap level with, or below the top of the child's shoulder. To access the harness pull apart seat pad. Please see figure 16. • Carefully place the child in the stroller seat and bring the safety harness around the child's waist and over the shoulders. Place the crotch strap between the child's legs. Insert the male end of each shoulder/waist belt into
ページ6に含まれる内容の要旨
ATTACHMENT OF THE BABY TREND INFANT CAR SEAT * To attach the Baby Trend Infant Car Seat, recline the seat all the way back. Please see figure 19 * Check that the front child tray is firmly attached to the stroller armrests. Make sure that the car seat locks into the front child tray. Then turn tabs on stroller frame to lock the front of the car seat into the stroller. See figure 20. * Position the Infant Car Seat, facing toward the rear of the stroller, so that the seat shell goes into t
ページ7に含まれる内容の要旨
SEAT BACK POSITIONING WARNING: The upright position should be used only for a child that is at least 6 months old. * The seat has a multiple position recline that is controlled by a cord and spring loaded adjuster behind the seat. To recline the seat, pull back on the loop of the adjuster. Please see figure 23. To place the seat back in a more upright position, grab the adjuster with one hand and pull the cord to the desired position with the other hand. See figure 24. The cord will lock
ページ8に含まれる内容の要旨
CANOPY Front frame * To open the canopy, push forward on the front frame of the canopy. To tube close canopy, pull the front edge toward the rear of the stroller until folded. Always fold the canopy prior to folding the stroller frame. Please see figure 26. Figure 26. CAUTION: Read the following section completely before folding your stroller! TO FOLD STROLLER * Close the canopy as described in the canopy section. NOTE: For an easier fold place the seat in the furthest recline position.
ページ9に含まれる内容の要旨
TO UNFOLD STROLLER * To unfold the stroller slide the red fold lock with your thumb while squeezing the large red fold button in the center of the handle and push down on the handle. Figure 29. WARNING: Failure to follow these folding instructions could result in serious injury or death. Figure 30. CLEANING SEAT PAD * To clean the seat pad. use warm water, soap and a sponge, and let air dry. S T O P IF YOU EXPERIENCE ANY DIFFICULTY IN USING THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER S
