ページ1に含まれる内容の要旨
Programming Your Honeywell Xenon 1900 EZ ID Scanner
1-866-468-5767 International Point of Sale
1
201-928-0222 555 Cedar Lane Teaneck,
New Jersey 07666
ページ2に含まれる内容の要旨
This document will show you how to program your Honeywell Xenon 1900 EZ ID Scanner to read barcodes the way they are formatted in your Corner Store POS database. Most of your products have UPC-A barcodes that have 12 digits with 10 digits in the middle, one in the front and one at the end. Here’s an example: Other products have UPC-E barcodes that have 8 digits with 6 in the middle, one in the front (usually a zero) and one at the end. Here’s an example: 1-866-468-5767
ページ3に含まれる内容の要旨
All of these codes and more are found in the Honeywell Xenon 1900 EZ ID Scanner user manual found here: http://www.honeywellaidc.com/CatalogDocuments/Xenon-UG%20Rev%20E.pdf Reset to factory defaults (usually not necessary) 1. Remove Custom Defaults 2. Activate Defaults Carriage Return (simulates Enter key) - Use this if when you scan a barcode, you have to press enter to get the item # onto the invoice grid 1-866-468-5767
ページ4に含まれる内容の要旨
UPC-A [12 digit codes] Transmit the first digit – Reads the first digit Remove the first digit – Does not read the first digit Transmit the last digit – Reads the last digit Remove the last digit – Does not read the last digit 1-866-468-5767 International Point of Sale 4 201-928-0222
ページ5に含まれる内容の要旨
UPC-E [8 Digit Codes] Transmit first digit – Reads the first digit Remove first digit – Does not read the first digit Transmit the last digit – Reads the last digit Remove the last digit – Does not read the last digit 1-866-468-5767 International Point of Sale 5 201-928-0222
ページ6に含まれる内容の要旨
The Honeywell scanner was designed to read Driver’s Licenses. In order for your scanner to read the correct information on the ID (Birthday; displayed as MM/DD/YYYY) you will need to scan the code below. This code works best if you print out the code. 1-866-468-5767 International Point of Sale 6 201-928-0222
ページ7に含まれる内容の要旨
Setting up Driver’s License Checks in CornerStore To set up an age restriction on an inventory item you can follow these steps. Step 1: Open up CornerStore and go to Setup > Application SetUp > Inventory Step 2: You can modify up to 3 age levels for your items. The most common ages are 18, 19, and 21. When you are done entering in the age levels click Update. 1-866-468-5767 Internati
ページ8に含まれる内容の要旨
Step 3: Go to Setup > Administrator > Inventory Maintenance, look up for an item you would like to put an age level on and click the Optional Info Tab. 1-866-468-5767 International Point of Sale 8 201-928-0222 555 Cedar Lane Teaneck,
ページ9に含まれる内容の要旨
Step 4: Check the box for the ID level you would like to set. Check ID 3 will be set to 21. Click Update and Exit. Step 5: Ring up the item as normal, a new box will appear for an ID scan. Scan the ID into here and will either Accept it or Reject it. As an Admin or someone with the permission can press skip to bypass the ID scan. ACCEPTED Once the ID has been accepted, for any other item that needs an ID scan it will not need to scan it again for the rest of the invoice. If t
