ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
DS2400 INSTALLATION MANUAL
ページ3に含まれる内容の要旨
We Datalogic S.p.A. Via Candini, 2 40012 - Lippo di Calderara Bologna - Italy declare under our sole responsibility that the product DS2400-XXXX, Laser Scanner and all its models to which this declaration relates is in conformity with the following standards or other normative documents EN 55022, August 1994:LIMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE CHARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENT (ITE) EN 50082-2, March 1995:ELECTROMAGNETIC COMPATIBILITY. GENERIC IMMUNITY STAND
ページ4に含まれる内容の要旨
CONTENTS GUIDE TO INSTALLATION ...............................................................v General View ..................................................................................... vi SAFETY PRECAUTIONS ................................................................ vii Laser Safety...................................................................................... vii Standard Regulations ....................................................................... vii Power Supply..
ページ5に含まれる内容の要旨
3 READING FEATURES....................................................................3.1 3.1 Step-Ladder Mode...........................................................................3.1 3.2 Picket-Fence Mode..........................................................................3.2 3.3 Performance ....................................................................................3.3 3.3.1 Raster ..............................................................................................3
ページ6に含まれる内容の要旨
GUIDE TO INSTALLATION The following can be used as a checklist to verify all of the steps necessary for complete installation of the DS2400 scanner. 1) Read all information in the section "Safety Precautions” at the beginning of this manual. 2) Correctly position and mount the scanner for barcode reading according to the information in par. 2.2, 2.5 and 3.4. 3) Provide correct system cabling according to the signals necessary for your application (see all sub-paragraphs under 2.3 and 2.4). S
ページ7に含まれる内容の要旨
DS2400 General View 1 2 8 3 4 7 5 6 Figure A Power ON \ Data Tx LED Warning and Device Class Labels 1 5 External Trigger LED Laser Beam Output Window 2 6 Good Read LED Accessory Mounting Holes 3 7 Laser ON LED Mounting Holes 4 8 vi
ページ8に含まれる内容の要旨
SAFETY PRECAUTIONS LASER SAFETY The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of the DS2400 scanner. Standard Regulations This scanner utilizes a low-power laser diode. Although staring directly at the laser beam momentarily causes no known biological damage, avoid staring at the beam as one would with any very strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even throu
ページ9に含まれる内容の要旨
Warning labels indicating exposure to laser light and the device classification are applied onto the body of the 5 scanner (Figure A, ). LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT MAX. OUTPUT RADIATION 1 mW EMITTED WAVE LENGTH 630~680 nm TO IEC 825-1 (1993) CAUTION - LASER LIGHT WHEN OPEN AVOID EXPOSURE TO BEAM LISTED This product conforms to the applicable ACCESSORY requirements of 21CFR1040 at the 45AF R R I.T.E. date of manufacture. Warning and device class labels D
ページ10に含まれる内容の要旨
DATALOGIC DS2400 1 GENERAL FEATURES 1.1 INTRODUCTION The DS2400 laser scanner satisfies the most advanced needs of a wide range of users. It has been developed focusing on the realistic requirements of its target market. The outstanding result is an extremely compact, cost- effective and easy to use industrial scanner. The DS2400 belongs to the generation of Datalogic scanners that operate under the 'C' programming environment, which is a recognized industry standard.
ページ11に含まれる内容の要旨
DS2400 DATALOGIC • completely configurable via serial interface (WinHost™ ). • 2 serial communication interfaces. • supply voltage from 10 to 30 Vdc. • reads all popular codes. • test mode to verify the reading features and exact positioning of the scanner without the need for external tools. • programmable in 4 different operating modes to suit the most various barcode reading system requirements. • code verifier. The DS2400 uses a solid state laser diode as a light source; the light emitted h
ページ12に含まれる内容の要旨
DATALOGIC DS2400 1.3 AVAILABLE MODELS The DS2400 scanner is available in versions that differ in regard to the following parameters: • Reading range • Serial interfaces • Linear or raster reading • Connections The following models are therefore available: DS2400 - X X X X Reading Range Connections 1 = Medium range 0 = Connector 2 = Long range 1 = Junction Box Linear/Raster Serial Communication Interface 0 = Linear 0 = RS232 main + RS232 aux 1 = RS485 main + RS232 aux 1 = Raster The following ta
ページ13に含まれる内容の要旨
DS2400 DATALOGIC 1.4 ACCESSORIES The following accessories are available on request for the DS2400: • 90° deflection mirror GFC-2100 • 20 mA Current Loop interface INT-22 1.5 GFC-2100 ACCESSORY INSTALLATION GFC-2100 is a 90° deflection mirror available on request for DS2400. The installation of the 90° deflection mirror is very easy (Figure 1.1). CAUTION Avoid any contact with the deflection mirror, mirrored rotor, the lenses or other optical components, otherwise the performance of the reader w
ページ14に含まれる内容の要旨
DATALOGIC DS2400 2 INSTALLATION 2.1 PACKAGE CONTENTS Verify that the DS2400 reader and all the parts supplied with the equipment are present and intact when opening the packaging; the list of parts includes: 1. DS2400 reader with cable 2. Installation manual 3. Bar code test chart (PCS = 0.9) 4. DS2400 configuration program disk 5. Mounting kit: - bracket - screws * Junction box (for DS2400-XXX1 models only), see par. 1.3. 3 4 2 * 1 5 Figure 2.1 - DS2400 package contents Installation - 2.1
ページ15に含まれる内容の要旨
DS2400 DATALOGIC 2.2 MECHANICAL INSTALLATION DS2400 can be installed to operate in different positions. The four screw holes (M4 x 5) on the body of the reader are for mechanical fixture (Figure A, 5 ). The diagrams below give the overall dimensions of the scanner and mounting bracket and may be used for installation. Refer to par. 2.5 for correct positioning. Figure 2.2 - DS2400 Overall dimensions 2.2 - Installation
ページ16に含まれる内容の要旨
DATALOGIC DS2400 2.3 JUNCTION BOX INSTALLATION The Junction Box provides a passive connection between your scanner and the outside world in a fast and practical way. It represents an alternative to the 25-pin connectors. Figure 2.3 shows the basic layout of a scanner using the junction box. Junction Box DS2400 Scanner cable System cables Figure 2.3 - Scanner using Junction Box For Junction Box connections, the scanner has a cable that terminates in a 24 pin connector that plugs into the
ページ17に含まれる内容の要旨
DS2400 DATALOGIC The Junction Box is designed to be mounted to a panel of metal, plastic or other appropriate material using the mounting screws provided in the package. To do this: 1) Open the junction box by unscrewing the 4 cover screws. If necessary, using the two mounting holes inside the junction box as a pattern, mark the panel with an appropriate object and then drill two small pilot holes in the panel. Figure 2.5 - Mounting Junction Box 2) Align the junction box and insert the two self-
ページ18に含まれる内容の要旨
DATALOGIC DS2400 2.3.2 Junction Box Electrical Connections The connection and wiring procedure for Junction Box is described as follows: 1) Open the junction box by unscrewing the 4 cover screws. 2) Pass all System cables through the glands in the junction box housing. 3) To connect the power and input/output signals: • Prepare the individual wires of the system cables by stripping the insulation back approximately 11 mm. • Using a device such as a screwdriver, push down on the orange lever dire
ページ19に含まれる内容の要旨
DS2400 DATALOGIC J. Box Pinout for DS2400 Pin Name 18 39 VS 01 02 GND 03 VS 04 GND 11 5 7 05 CHASSIS J1 VS 06 07 VS Figure 2.7 - Junction Box connector and pinout 08 EXT TRIG + 09 EXT TRIG - To allow connection of an NEC Class 2 10 GND Power Unit, use a correct female plug GND 11 12 VS adapter. 13 VS Junction Box 14 N.C. 15 N.C. NEC Class 2 GND 16 Power supply 17 GND 18 OUT1 + 19 OUT REF 20 OUT2 + N.C. 21 22 N.C. Female Plug 23 N.C. *24 Main interface signals System cables see table below *25 *2
ページ20に含まれる内容の要旨
DATALOGIC DS2400 4) After wiring the junction box and while the scanner is unplugged from the power, place the Scanner cable so that the rubber seal fits into the cutout in the housing of the junction box and plug the 24 pin connector into connector J1 on the PCB inside the junction box as shown in Figure 2.9. Rubber seal J1 Scanner cable Figure 2.9 - Scanner cable connections to the junction box 5) Close the junction box using the 4 cover screws making sure the rubber seal is fitted correctly b
