ページ1に含まれる内容の要旨
USER’S GUIDE
MBP36
BABY MONITOR
USER’S GUIDE
The features described in user's guide are subject to
modifications without prior notice.
ページ2に含まれる内容の要旨
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP36. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product related questions, please ca
ページ3に含まれる内容の要旨
Overview of the Parent Unit 14 10 11 12 1 15 2 6 19 3 7 18 4 8 16 20 5 9 17 13 1. Display (LCD screen) 10. Power Adapter / Battery LED 2. Up Key + BLUE when mains adapter Normal Mode: Tilt Up power on. Menu Mode: Up RED when battery low. 3. Down Key - 11. Unit ON/OFF LED (Green) Normal Mode: Tilt Down 12. Audio Level LED (Green, Menu Mode: Down Orange, Red, Red) 4. Left Key < 13. Microphone Normal Mode: Pan Left 14. Power Key P Menu Mode: Left Press and Hold to turn the unit 5.
ページ4に含まれる内容の要旨
Parent unit menu icons (cont’d) * Volume Level Control (8 Levels) & Brightness Level Control (8 Levels) m Lullaby Control (5 Song Selections) Z Zoom Level Control (1X, 2X) A Alarm Setting (6h, 4h, 2h, OFF) C Cam Control (scan, view, add, del) Temperature Reading (HH ºC / ºF or LL ºC / ºF) Icon & readings turn RED > 29ºC / 84ºF, and reading display HH ºC / ºF > 36ºC / 97 ºF) t Icon & readings turn RED < 14ºC / 57ºF, and reading display LL ºC / ºF < 1ºC / 34 ºF) Overview of Your Baby Unit 9 1 11 2
ページ5に含まれる内容の要旨
Table of contents 1. Safety Instructions......................................................................... 6 2. Getting Started ............................................................................... 8 2.1 Baby Unit Power Supply.................................................................8 2.2 Parent Unit Battery Installation.......................................................8 2.3 Parent Unit Power Supply ..............................................................9 2.4
ページ6に含まれる内容の要旨
1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the adapter cord out of baby's reach. NEVER place camera or cords within the cot / crib. Secure the cord some distance away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. CAMERA SET UP & USE: ● Determine a location for the CAMERA that will provide the best view of your baby in his cot / crib. ● Place the CAMERA on a flat surface, such as a dresser, bureau, or shelf. ● NEVER place ca
ページ7に含まれる内容の要旨
• Never use extension cords with power adapters. Only use the power adapters provided. • Test this monitor and all its functions so that you are familiar with it prior to actual use. • Do not use the baby monitor near water. • Do not install the baby monitor near a heat source. • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Only insert a battery pack of the same type. • Do not touch the plug c
ページ8に含まれる内容の要旨
2. Getting Started 2.1 Baby Unit Power Supply 1. Connect the small plug of the power adapter to the baby unit and the other end to the electrical outlet. NOTE Only use the enclosed power adapter (5.9V DC / 1000mA). 2. Slide the ON/OFF switch to the ON position. The power LED will light up in green. 3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off. 2.2 Parent Unit Battery Installation Black Red 1. Insert the wire tab of the rechargeable battery pack into the contact slo
ページ9に含まれる内容の要旨
2.3 Parent Unit Power Supply IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure. 1. Connect the small plug of the power adapter to the parent unit and the other end to the electrical outlet. Only use the enclosed power adapter (6V DC/500mA). 2. Press and hold the P POWER ON/OFF button for 1 second to turn ON the parent unit. 3. Once the baby and parent units are sw
ページ10に含まれる内容の要旨
2. During power ON, when adapter is plugged in, the battery icon on screen's top right corner will show that the battery is charging. The Blue LED at the top left corner light up indicates adapter is plugged in. 2.4 Registration (Pairing) The Baby monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedure below: 1. Press the M butt
ページ11に含まれる内容の要旨
3. Using the Baby Monitor MBP36 3.1 Setting up • Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the baby unit's head angle by rotating the camera up, down, left and right until you are satisfied with the image in the parent unit. NOTE Do not place the baby unit within baby's reach! If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not clo
ページ12に含まれる内容の要旨
4. MBP36 Parent Unit Menu Options 4.1 Volume 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until * is highlighted. 3. Press the + UP button or - DOWN button to select the desired volume level from level 1 ~ 8. (The default volume level setting is level 4.) 4.2 Brightness 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until & is highlighted. 3. Press the + UP button or - DOWN button to select the desire
ページ13に含まれる内容の要旨
4.5 Alarm 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until A is highlighted. 3. Press the + UP button or - DOWN button to select the alarm time (6h, 4h, 2h). (The default setting is Alarm OFF.) If an alarm time is selected, the parent unit will beep for about 45 seconds after every 6, 4 or 2 hour period, and the alarm icon will flash red. 4.6 Camera Control 4.6.1 Add (pair) a camera 1. Press the M button and the menu bar will pop up. 2.
ページ14に含まれる内容の要旨
TIP Quick Method to View Cameras instead of entering into the menu bar. Directly press OK repeatedly to select CAM 1, CAM 2, CAM 3, CAM 4, SCAN. 4.6.3 Delete a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted, and the del/add/view/scan menu will pop up. 3. Press the + UP button or - DOWN button to select DEL, and press the OK button to confirm. 4. CAM 1/CAM 2/CAM 3/CAM 4 will pop up, press the + UP button or - DO
ページ15に含まれる内容の要旨
5. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the
ページ16に含まれる内容の要旨
6. Cleaning Clean the MBP36 with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP36 away from hot, humid areas or strong sunlight, and don't let it get wet. • Every effort has been made to ensure high standards of reliability for your M
ページ17に含まれる内容の要旨
7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the parent unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on? Press and hold the ON/OFF key P on the parent unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF key V to turn it on. • When operating using batteries, only the Dis
ページ18に含まれる内容の要旨
Interference Noise interference on your parent unit • Your baby and parent units may be too close. Move them farther apart. • Make sure there is at least 3 to 6 feet between the 2 units to avoid audio feedback. • lf the baby unit is too far away it may be out of range, so move the baby unit closer to the parent unit. • Make sure the baby and parent units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.4GHz products, such
ページ19に含まれる内容の要旨
8. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service: US and Canada 1-888-331-3383 UK 0845 218 0890 To order a replacement battery pack, contact customer service or visit our website. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics Interna
ページ20に含まれる内容の要旨
What will BINATONE do? BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that does not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts. What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR P
