ページ1に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 3
DIGITAL HOME
THEATER SYSTEM
HT-DS665T
Instruction Manual
COMPACT COMPACT
DIGITAL AUDIO DIGITAL VIDEO
ページ2に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 4 Safety Warnings Note to CATV system installer : CLASS 1 LASER PRODUCT This reminder is provided to call the CATV system KLASSE 1 LASER PRODUKT installer’s attention to Section 820~40 of the NEC LUOKAN 1 LASER LAITE which provides guidelines for proper grounding and, KLASS 1 LASER APPARAT in particular, specifies that the cable ground shall be PRODUCTO LASER CLASE 1 connected to the grounding system of the building, as close to the point of cable e
ページ3に含まれる内容の要旨
PREPARATION 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 5 Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before mo
ページ4に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 6 Features Multi-Disc Playback & AM/FM Tuner The HT-DS665T combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, CD-R/RW, and DVD-R/RW, with a sophisticated AM/FM tuner, all in a single player. DVD-Audio compatible Experience the super high-quality audio performance of DVD-Audio. The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range, l
ページ5に含まれる内容の要旨
PREPARATION 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 7 Contents PREPARATION Safety Warnings..................................................................................................................................................................1 Precautions.........................................................................................................................................................................2 Features.................................................
ページ6に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 8 Notes on Discs DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology. Now you can enjoy these V I D E O realistic effects in the home, as if you were in a movie theater or concert hall. DVD players and the discs are coded by region. These regional codes must match in order ~ 1 6 for the disc to play. If the codes do not match, the disc will not play. The Region
ページ7に含まれる内容の要旨
PREPARATION 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 9 Disc Recording Format CD-R Discs Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the • condition of the disc. Use a 650MB/74 minute CD-R. Other CD-R media, may not be playable. • Some CD-RW (Rewritable) media, may not be playable. • Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, • you may not be able to fully play t
ページ8に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 10 Description —Front Panel— Open/Close button Auto Sound Calibration button Tuning Down & Skip ( ) buttons Direct Play button Power ( ) button SURROUND PLUS button / Disc Change Virtual Headphone button button Volume control Function button Remote Control Sensor Standby indicator RRSS INPUT(Auto Sound Stop ( ) button Calibration) Jack Play/Pause ( ) button Headphone Jack MODE(RRSS/SDSM) button Tuning Up & Skip ( ) buttons PRO LOGIC
ページ9に含まれる内容の要旨
PREPARATION 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 11 —Rear Panel— Video Output Connector Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector. Anynet Output/Input External Video Component Connector COMPONENT VIDEO OUTPUT Input Connectors Connectors Connect a TV with component video External Audio Component Input inputs to these jacks. Connector AM Antenna Connector Cooling Fan External Digital Optical FM Antenna Connector Input Connector Use this to connect exte
ページ10に含まれる内容の要旨
MUTE INFO 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 12 Description —Remote Control— TV indicator TV DVD RECEIVER TV, DVD POWER button DVD RECEIVER indicator TV/DVD RECEIVER button TV/ TV/VIDEO, DIMMER button OPEN/CLOSE TV/VIDEO DVD RECEIVER DIMMER OPEN/CLOSE button DISC SKIP button AUX button DISC SKIP TUNER AUX BAND TUNER BAND button PL II MODE PL II EFFECT SLOW MO/ST PL II EFFECT button PL II MODE button SLOW, MO/ST button LSM + ASC LSM – Live Surround Mode –, + button ASC button DVD
ページ11に含まれる内容の要旨
PREPARATION 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 13 Insert Remote Batteries Remove the battery Insert two 1.5V AAA Replace the battery 1 2 3 cover on the back of batteries, paying cover. the remote by attention to the correct pressing down and polarities (+ and –). sliding the cover in the direction of the arrow. Follow these precautions to avoid leaking or cracking batteries: Caution Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–). • Use the co
ページ12に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 14 Speaker Assembly Method The speakers can be installed on stands or a wall, depending whether the RRSS or SDSM speaker installation configuration is used. Read the following instructions on speaker assembly carefully and install the speakers correctly. Check the components before assembling and installing the speakers. Speaker Components Front Speaker (2EA) Rear Speaker (2EA) Center Speaker Subwoofer Front Stand (2EA) Rear Stand (2EA) Front Spe
ページ13に含まれる内容の要旨
CONNECTIONS 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 15 Installing speakers in the RRSS (Rear Reflecting Surround System) Configuration using stands Installing speakers on Front stands Follow the instructions and install the speaker as shown below. Install the front Turn the screw on the 1 2 speaker on the front rear of front speaker Front Speaker stand. to fasten it. Phillips Screwdriver Front Stand Install the rear Connect the 3 4 speaker on the front Rear Speaker rear speaker speaker.
ページ14に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 16 Speaker Assembly Method (Con’t) Installing speakers in the RRSS (Rear Reflecting Surround System) Configuration using wall mounts Installing the Front/Rear speakers together on the wall Follow the instruction and install the speakers as shown below. Install the rear Connect the 1 2 speaker on the front rear and front Rear Speaker speaker. speaker wires to the rear of front speaker. Rear Speaker wire Front Speaker Front Speaker wire Fasten 2 scr
ページ15に含まれる内容の要旨
CONNECTIONS 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 17 Installing speakers in the SDSM (Super Digital Sound Master) Configuration using stands Installing the Front and Rear speakers on stands Follow the instructions and install the speakers as shown below. Install the front Turn the screw on the 1 2 speaker on the front rear of front speaker Front Speaker stand. to fasten it. Phillips Screwdriver Front Stand Front Speaker Cover Insert the front Connect the 3 4 speaker cover on front spea
ページ16に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 18 Speaker Assembly Method (Con’t) Installing speakers in the SDSM (Super Digital Sound Master) Configuration using wall mounts Installing speakers on front and rear walls Follow the instructions and install the speakers as shown below. Insert the front speaker cover on the front Connect the front speaker wire on the rear of 1 2 speaker. front speaker. Front Speaker Cover Front Speaker Front Speaker wire Fasten 2 screws (separately sold) on the wal
ページ17に含まれる内容の要旨
CONNECTIONS 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 19 Unfasten and disconnect the screw on the Assemble rear stand and bracket. 5 6 bottom of rear stand. Bracket Screw Phillips Screwdriver Phillips Screwdriver bottom of rear stand Install the rear speaker on the rear stand. Connect the rear speaker wire on the bottom of 7 8 rear stand. Rear Speaker Rear Speaker wire Rear Stand bottom of rear stand Fasten 2 screws (separated) on the wall. Hang the rear speaker on 9 10 the wall. 9cm 16
ページ18に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 20 Connecting the Speakers Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Position of the DVD Player Selecting the Listening Position Place it on a stand, cabinet shelf, or under the The listening position should be located about 2.5 to 3 • TV stand. times the distance of the TV's screen size away from the TV. Example: For 32" TVs 2~2.4m (6~8 feet) For 55" TVs 3.5~4m (11~13 feet) L R LS RS Front
ページ19に含まれる内容の要旨
CONNECTIONS 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 21 Connect the front/rear, center, and subwoofer speakers to the speaker terminals on the back of the main unit. • Back of the Speaker Back of the Main Unit Press down the terminal Insert the black wire into the Connect the wires to the output plugs 1 2 3 tab on the back of the black terminal (–) and the gray of the same color on the back of the speaker. wire into the gray (+) terminal, main unit, making sure that the polarity and then r
ページ20に含まれる内容の要旨
1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 22 Connecting the Video Out to TV Choose one of the four methods for connecting to a TV. *Better picture quality (in increasing order): Composite S-Video Component HDMI HT-DS665T METHOD 4 METHOD 2 METHOD 3 METHOD 1 (supplied) TV ....... METHOD 1 Composite Video (Good Quality) - Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your TV. ....... METHOD 2 S-Video (Good Quality) - If you
