ページ1に含まれる内容の要旨
R
R
Model 2797
OWNER’S MANUAL
Keep Instructions For Future Reference
©2007 Graco ISPM015BC 4/07 US
ページ2に含まれる内容の要旨
Warnings to Parents and Other Users Failure to follow these warnings and the assembly instructions could result in serious injury or death. This device is designed to aid in the monitoring of your child. When using the monitor, you must still provide the supervision necessary for the continued safety of your child. This product is not designed or intended for use as a medical monitor. Always be sure that both the transmitter and receiver are working properly and are within range of each o
ページ3に含まれる内容の要旨
• DO NOT place unit near water and moisture. Do not use the Nursery Unit outdoors. Do not use the Nursery Unit near possible wet areas, such as a bathtub, shower, wash basin, sink, laundry tub, swimming pool, wet basement, etc. • Keep Nursery Unit away from heat sources, such as fireplaces, radiators, stoves, and TVs or other appliances. Heat can damage the case or electrical parts. • Do not use the Nursery Unit if: • The adapter cords or plugs have been damaged. • The unit ha
ページ4に含まれる内容の要旨
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
ページ5に含まれる内容の要旨
Digital Color Video Baby Monitor Quick Start Product Instruction Manual OWNER’S MANUAL Keep instructions for future use. Parts List Adult assembly required. Tool required: Phillips screwdriver Quick Start Manual Parent Unit (A5066) Parent Unit Battery Nursery Unit (1) AC Adapter (1) AC Adapter (A508) Wall Mount Belt Clip Nursery Unit Base (A5195) 5 R R
ページ6に含まれる内容の要旨
UP (pg15) OK (pg15) Parent Unit CONNECTION LIGHT ANTENNA (LED)(pg13) VOLUME UP (pg28) VOLUME DOWN (pg28) SOUND LIGHTS LCD SCREEN DOWN (pg15) VIDEO ON/OFF (pg14) POWER ON/OFF (pg13) AC ADAPTER JACK (pg8) CHARGING STATUS LIGHT (pg29) SPEAKER BATTERY LEVEL LIGHT (pg29) BATTERY (pg7) 6
ページ7に含まれる内容の要旨
Installing Batteries The battery must be plugged 1 into the Parent Unit before the unit will be ready for use. Remove the battery door cover on the Parent Unit by sliding it down. Plug battery into the slot 2 shown in #2. Place battery pack into recess 3 and press wire into the slot. 7
ページ8に含まれる内容の要旨
Replace the battery door. 4 Attach the AC adapter 5 to the unit and plug into wall to charge the battery. Charge battery for hours. 8 R
ページ9に含まれる内容の要旨
Nursery Unit VIDEO CAMERA POWER LED (pg30) MICROPHONE ON/OFF (pg12) BATTERIES (pg10) AC ADAPTER JACK (pg11) 9 R
ページ10に含まれる内容の要旨
Installing Batteries (Optional) 6 Use a Phillips head screwdriver to remove the battery door. NOTE: Screw should be loosened but stay attached to battery door. (Optional) 7 Insert AAA batteries. Make sure they are inserted correctly. ● Batteries can be useful in the case of a power outage. ● Batteries should be replaced periodically. ● Batteries should only be used in case of emergency or for short periods of time. ● To save battery power, only audio functions are active while using batt
ページ11に含まれる内容の要旨
Attaching Nursery Unit Base Attach the AC adapter to 8 the back of the nursery unit base and plug into wall. Mount nursery unit onto 9 base to operate. 11
ページ12に含まれる内容の要旨
R R Nursery Unit Power On/Off Depress button for 1 sec. 10 to turn camera on. To change camera angle, 11 swivel the nursery unit top in the desired direction. Please note that camera cannot swivel completely around. 12
ページ13に含まれる内容の要旨
Parent Unit Power On/Off Press and hold ON/OFF 12 button for 1 second. Unit will cycle through intro and begin searching for the Nursery Unit. Make sure Nursery Unit is 13 turned on. The parent unit R will display “searching” on the status screen until the nursery unit is found. The Searching... live video feed will then be Press OK for Menu shown. The connection LED will turn from red to green. 1 R
ページ14に含まれる内容の要旨
Press and hold ON/OFF 14 button for 1 second to turn R unit off. To activate or deactivate the 15 live video feed, press the video button. Pressing the video button will allow the user to view the image from the nursery unit. 14 R
ページ15に含まれる内容の要旨
To set up preferences or 16 change status, press the “OK” button. To cycle through the 17 different choices, press up or down. After choosing one of the 18 options, press the “OK” button to make the selection. NOTE: Once you make a selection (OK), the unit will automatically advance you to the next option/screen or return you to the live video feed (if applicable). 15 R R R
ページ16に含まれる内容の要旨
Zoom Press “OK” to open Menu. 19 Choose the Zoom option. Press “Ok” to select it. Main Menu Zoom... Alarm... Settings... Exit Use UP/DOWN to choose, OK to select Select Zoom In/Move. 20 Zoom Menu Zoom In/ Move Zoom Out Back Use UP/DOWN to choose, OK to select Choose one of the 5 positions 21 by pressing Up/Down. Press “OK” to select. Zoom o om Zo Z Zoo Zoom Z Z o Z Zoo Z Z Z o om Zoom Zoom Use Up/Down to choose an area to Zoom IN/OUT Press OK to select. 16
ページ17に含まれる内容の要旨
The Zoom icon should appear at 22 the top the status screen. Monitor will return to the live video feed if available. Press OK for Menu Zoom Out Press “OK” to open Menu. 23 Choose the Zoom option and press” Ok” to select it. Press OK for Menu Choose “Zoom Out” and press 24 “OK” to select it. Monitor will return to live video screen if Zoom Menu available. Zoom icon will not Zoom In/ Move Zoom Out be visible on the status screen. Back Use UP/DOWN to choose, OK to select 17
ページ18に含まれる内容の要旨
Setting Time Press “OK” to open Menu. 25 Choose “Settings “and press “OK” to select it. Main Menu Zoom... Alarm... Settings... Exit Use UP/DOWN to choose, OK to select Choose “Time” and press “OK” 26 to select it. Settings Menu Time... Brightness... Video Off Time... Language... Back... Use UP/DOWN to choose, OK to select 18
ページ19に含まれる内容の要旨
Choose “Time” and press “OK” 27 to select it. Time Menu Time... Time Format... Back Use UP/DOWN to choose, OK to select Press Up/Down to adjust the 28 first digit. Press OK to move to the next digit. Monitor will Set Time return to the Time Menu after 07:22 PM adjusting all digits. To return to the live video feed (if available), select and press Back/Back / Exit, or wait 5 seconds and monitor will return to live video feed on its own. 19 Use UP/DOWN to choose #, OK to select
ページ20に含まれる内容の要旨
Time Format Press “OK” to open Menu. 29 Choose “Settings” and press “OK” to select it. Main Menu Zoom... Alarm... Settings... Exit Use UP/DOWN to choose, OK to select Choose “Time”and press “OK” 30 to select it. Settings Menu Time... Brightness... Video Off Time... Language... Back... Use UP/DOWN to choose, OK to select 20
