ページ1に含まれる内容の要旨
Always there to help you
Register your product and get support at
www.philips.com/welcome
Questi Question on? ?
Cont Contac act t
HTB3510
Philip Philips s
HTB3540
HTB3570
User manual
ページ2に含まれる内容の要旨
Contents 6 Update software 29 1 Important 2 Check software version 29 Safety 2 Update software through USB 29 Care for your product 3 Update software through the Internet 30 Care of the environment 3 3D health warning 4 7 Pr oduct spec ifications 31 2 Your home theater 5 Main unit 5 8 Troubleshooting 35 Remote control 5 Connectors 6 9 Notice 37 Copyright 37 3 Connect and set up 8 Open source software 37 Connect speakers 8 Compliance 37 Connect to TV
ページ3に含まれる内容の要旨
wall mount to a wall that can support the 1 Important combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper Read and understand all instructions before you wall mounting that results in accident, use your product. If damage is caused by failure injury or damage. to follow instructions, the warranty does not • For speakers with stands, use only the apply. supplied stands. Secure the stands to the speakers tightly. Pl
ページ4に含まれる内容の要旨
of children at all times! If swallowed, the Care of the environment battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. • If you suspect that a battery has been swallowed or placed inside any part of the Your product is designed and manufactured body, seek immediate medical attention. with high quality materials and components, • When you change the batteries, always which can be recycled and reused. keep all new and used batteries o
ページ5に含まれる内容の要旨
3D health warning If you or your family has a history of epilepsy or photosensitive seizures, consult a medical professional before exposing yourself to flashing light sources, rapid image sequences or 3D viewing. To avoid discomfort such as dizziness, headache or disorientation, we recommend not watching 3D for extended periods of time. If you experience any discomfort, stop watching 3D and do not immediately engage in any potentially hazardous activity (for example driving a car) unt
ページ6に含まれる内容の要旨
2 Your home a theater b c n d o Congratulations on your purchase, and e welcome to Philips! To fully benefit from the support that Philips offers(e.g. notification f of product software upgrade), register your product at www.philips.com/welcome. g p h q Main unit i r This section includes an overview of the main j unit. s k abcdef l t m u a (Open/Close) Open or close the disc compartment. b (Play/Pause) a (Standby-On) Start, pause or resume play. • Switch the home theater on or to
ページ7に含まれる内容の要旨
• Return to a previous menu screen. q (Pause) • In radio mode, press and hold to erase Pause play. the current preset radio stations. r (Mute) e Navigation buttons Mute or restore volume. • Navigate menus. s • In radio mode, press left or right to Access or exit sound options. start auto search. • In radio mode, press up or down to t SUBTITLE tune the radio frequency. Select subtitle language for video. f OK u Color buttons Confirm an entry or selection. Select tasks or options for Blu-ray d
ページ8に含まれる内容の要旨
a AC MAINS Fixed AC power cable. b SPEAKERS Connect to the supplied speakers and subwoofer. c DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. d AUDIO IN-AUX Connect to an analog audio output on the TV or an analog device. e USB(VOD) Slot for a USB storage device. The USB storage device is used to rent online videos. f FM ANTENNA Connect to the supplied FM antenna. g VIDEO OUT Connect to the composite video input on the TV. h DIGITAL IN-OPTICAL Connec
ページ9に含まれる内容の要旨
3 Connect and set SUB up FRONT FRONT FRONT WOOFER LEFT RIGHT CENTER This section helps you connect your home theater to a TV and other devices, and then set it up. For information about the basic connections of your home theater and accessories, see the quick start guide. REAR REAR LEFT RIGHT Note • For identification and supply ratings, see the type plate at the back or bottom of the product. * The actual speaker shapes may vary from the • Before you make or change any connections, m
ページ10に含まれる内容の要旨
5 SUBWOOFER (subwoofer): such as volume control for both the Place the subwoofer at least one meter TV and the home theater. (see 'Set to the left or right of the TV. Leave about up EasyLink (HDMI-CEC control)' on 10-centimeter clearance from the wall. page 11) 3 If you cannot hear the TV audio through your home theater, set up the audio manually. (see 'Set up the audio' on page Connect to TV 12) Connect your home theater to a TV to watch videos. You can listen to the TV audio through Op
ページ11に含まれる内容の要旨
4 If you cannot hear the TV audio through Connect audio from TV and your home theater, set up the audio manually. (see 'Set up the audio' on page other devices 12) Play audio from TV or other devices through your home theater speakers. Note Use the best quality connection available on • If your TV has a DVI connector, you can use an HDMI/ your TV, home theater, and other devices. DVI adapter to connect to TV. However, some of the features may not be available. Note • When your home theat
ページ12に含まれる内容の要旨
2 Select [Setup], and then press OK. 3 Select [Audio] > [Speaker Setup]. 4 Enter the distance for each speaker, and then listen to the test tones and change the volume. Experiment with the speaker positions to find the ideal setting. Set up EasyLink (HDMI-CEC 1 Using a coaxial cable, connect the COAXIAL connector on your home control) theater to the COAXIAL/DIGITAL OUT connector on the TV or other device. This home theater supports Philips EasyLink, • The digital coaxial connector mi
ページ13に含まれる内容の要旨
• On your TV, set the audio output to • on your TV, set the audio output to 'Amplifier' (instead of TV speakers). "Amplifier" (instead of TV speakers). For For details, see the TV user manual. details, see the TV user manual, and • setup the EasyLink audio control. 1 Press (Home). EasyLink controls 2 Select [Setup], and then press OK. With EasyLink, you can control your home 3 Select [EasyLink] > [System Audio theater, TV, and other connected HDMI-CEC Control] > [On]. compliant devices w
ページ14に含まれる内容の要旨
Before you start • To view the network settings, select • For Smart TV and software updates, make [Setup] > [Network] > [View sure that the network router has access to network settings]. the Internet with high-speed connection and is not restricted by firewalls or other Set up the wireless network security systems. • Make the necessary connections described in the quick start guide, and then switch What you need the TV to the correct source for your • A network router (with DHCP enabled
ページ15に含まれる内容の要旨
you’ve made at home, such as CD-R discs of 4 Use your home photos, videos, and music. 1 Insert a disc into the home theater. theater 2 If the disc does not play automatically, press DISC or select [play Disc] from the home menu. This section helps you use the home theater to play media from a wide range of sources. 3 Use the remote control to control play (see 'Play buttons' on page 14). Before you start • It is normal to hear a little noise when • Make the necessary connections described
ページ16に含まれる内容の要旨
1 Press . 1 Enable Bonus View in the Blu-ray disc menu. 2 Select AUD SYNC, and then press OK. 2 While you play the movie, press 3 Press the Navigation buttons (up/down) OPTIONS. to synchronize the audio with the video. » The options menu is displayed. 4 Press OK to confirm. 3 Select [PIP selection] > [PIP]. • Depending on the video, PIP menu [1] Play Blu-ray 3D disc or [2] is displayed. Your home theater can play Blu-ray 3D video. • To disable Bonus View, select [Off]. Read the 3D health wa
ページ17に含まれる内容の要旨
2 For DivX or RMVB/RM videos, if the Note subtitles do not appear correctly, continue the following steps to change the character • To clear the memory on the storage device, press (Home), select [Setup] > [Advanced] > [Clear set. memory]. 3 Press OPTIONS. » The options menu is displayed. 4 Select [Character set], and then select a character set that supports the subtitle. Data files Europe, India, LATAM, and Russia Your home theater can play pictures, audio and Character Language video
ページ18に含まれる内容の要旨
• Repeat all the tracks on the disc or the USB storage devices folder. • Turn off the repeat mode. Enjoy pictures, audio, and video stored on a USB storage device such as an MP4 player or Video options digital camera. While watching video, select options such What you need as subtitles, audio language, time search, and • A USB storage device that is formatted for picture settings. Depending on the video source, FAT or NTFS file systems, and complies some options are not available. with t
ページ19に含まれる内容の要旨
• [Repeat A-B]: Mark two points within a Note chapter or track to repeat play, or turn off the repeat mode. • Make sure that the picture and audio formats are supported by your home theater (see 'File formats' on • [Picture settings]: Select a predefined page 31). color setting. Picture options While viewing a picture, zoom into the picture, Radio rotate it, add animation to a slideshow, and change the picture settings. Listen to FM radio on your home theater, and 1 Press OPTIONS. store
ページ20に含まれる内容の要旨
Play buttons MP3 player Button Action / Select a preset radio station. Connect a MP3 player to play audio files. or What you need Alphanumeric • An MP3 player. buttons • A 3.5mm stereo audio cable. Navigation Left/Right: Search for a radio buttons station. 1 Using the 3.5mm stereo audio cable, Up/Down: Fine tune a radio connect the MP3 player to the AUDIO-IN frequency. connector on your home theater. Press to stop the installation of • If you use 6.5mm stereo audio cable, radio stati
