MTX Audio MTX HTB1の取扱説明書

ページ1に含まれる内容の要旨

HTB1
1 Mitek Plaza
Winslow, IL 61089
Home Theater Loudspeaker
815-367-3000
800-225-5689
System
21A6582

ページ2に含まれる内容の要旨

INTRODUCTION Congratulations on your purchase of MTX Loudspeakers. Your new speakers CARE AND MAINTENANCE represent the latest technologies in loudspeaker design and manufacturing. They Your speakers are designed to work with a wide range of electronic components. will provide outstanding performance and years of listening enjoyment. Please As little as 20 watts per channel can provide enough power for most applications. take time to read through this manual thoroughly to insure you get maxi

ページ3に含まれる内容の要旨

SPECIFICATIONS CENTER FRONT HTB1 Satellite/Center Channel RIGHT LEFT FRONT FRONT Driver Compliment Midrange- 3” shielded with paper cone, rubber surround Tweeter- 1/2" Balanced dome tweeter Frequency Response: 150Hz - 20kHz Impedance: 8 ohms nominal HTB1 45 SUBWOOFER Power Handling: 75 watts RMS / 150 watts peak music Recommended Amplifier Power: 20-75 watts RMS LEFT RIGHT Sensitivity: 85dB@2.83V/1M REAR REAR Weight: LISTENING AREA Satellite- 1.8 lbs. Center Channel- 3.0 lbs Dimensions: Satellit

ページ4に含まれる内容の要旨

EXPLANATION OF FEATURES AND CONTROLS WIRING AND CONNECTIONS Turn off all power to your subwoofer and other equipment before making any connections. Refer to Figure A Installation using speaker level inputs (Figure B). 1) Power Switch: This two position switch controls the power status of the sub- woofer. A/V Receiver or Amplifier + - + - Off: Turns the unit off. On: Turns the unit on regardless of whether a signal is present or not. LEFT RIGHT FR ON T FR ON T 2) Subwoofer crossover: This rotary