ページ1に含まれる内容の要旨
The Perfect Sound System for Your DVD Player
Just add your TV & DVD player; everything else is in the box
•
Incredible surround sound, perfect for DVD viewing & enhanced TV game experience
•
Also provides exceptionally great sound for your computer & MP3 player
•
Front panel audio input jack for MP3 & CD players
•
PLEASE READ CAREFULLY BEFORE USE
IB-HT3917-WM-E-041506
ページ2に含まれる内容の要旨
WARNING Please read important information displayed on the rating plate located on the bottom enclosure TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH before connecting this set to AC power. AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE FCC NOTE BLADE PLUG TO WIDE SLOT, FULLY INSERT. This equipmen
ページ3に含まれる内容の要旨
Thank you for purchasing this 5.1 Channel Home Theater Surround Sound System. This deluxe audio theater system turns your home into a virtual theater. Basic Features & Benefits of this Home Theater System: 1. 5.1 channel audio decoder for home theater surround sound. 2. Includes audio inputs for your DVD player and AUX (any audio device) and AUDIO INPUT jack on the front. 3. Powerful subwoofer provides real BOOM in your bass. 4. Deluxe easy-to-use remote control with batteries included. 5. Desig
ページ4に含まれる内容の要旨
• Getting Started Safety Instructions-----------------------------------------------------------------------------------------------------------------------------------1 Introduction----------------------------------------------------------------------------------------------------------------------------------------------2 Location of Controls---------------------------------------------------------------------------------------------------------------------------------4 Remote Control Operatio
ページ5に含まれる内容の要旨
1. ON/STANDBY button - In POWER ON mode, press to switch the set to on CONTROL PANEL or to standby mode. (ON THE FRONT OF THE SUBWOOFER) 2. ON/STANDBY indicator - This indicator flashes slowly in red when 1 2 3 4 5 6 the set is in the standby mode; Flashes in green confirming you pressed any button on the main unit or on the remote control and is steadily on in SENSOR SOURCE VOLUME green when the set is on. ON STANDBY 3. REMOTE SENSOR - Receives the signal from the REMOTE CONTROL (aim the REMOTE
ページ6に含まれる内容の要旨
1. IR DIODE - Sends the signal to the set. Do not block or cover this. REMOTE CONTROL 2. ON/STANDBY button - Switches the player from STANDBY to ON or ON to STANDBY (if the main POWER of the set is ON). 1 3. SOURCE button - Press to select the sound input source you want: DVD IN, AUX IN or AUDIO IN. 2 4. RESET button - Press to adjust all speakers’ output to the factory’s 5 3 default settings. 6 4 5. MUTE button - Instantly turns off the sound. Press again to restore the sound. 7 6. CHANNELS but
ページ7に含まれる内容の要旨
+ _ _ Battery Installation Remote Control Operating Range Point the REMOTE CONTROL unit within 20 feet from the remote control sensor and facing the front of the HOME THEATER SYSTEM. 1. Gently push the door and slide to open the BATTERY DOOR. 2. Insert 2 size “AAA” alkaline batteries (included) into the REMOTE CONTROL RANGE battery compartment according to the “ + ” and “ – ” markings inside the battery compartment. SENSOR SOURCE VOLUME ON STANDBY o o 30 30 Distance within 20 feet Remember: The
ページ8に含まれる内容の要旨
Connect the supplied speaker system by matching the colors of the terminals to those of the cords. The speaker wires and connectors are color-coded for easier set up. FRONT RIGHT SPEAKER NOTE: FRONT LEFT SPEAKER Connect the Front Left speaker to • the Front Left terminals (red + black). R L Connect the Front Right speaker to • DVD IN the Front Right terminals (red + black). AUX IN Connect the Center speaker to the • BLACK CENTER OUTPUT Center speaker terminals (blue + black). SPEAKER LEFT RED
ページ9に含まれる内容の要旨
To avoid short-circuiting the speakers Make sure the stripped end of each speaker wire does not touch another speaker terminal or the stripped end of another speaker wire. Examples of poor connection of the speaker wires LOOSE WIRE STRAND TOUCHING (This will short out the sound) WIRES SHORTED TO EACH OTHER (This will short out the sound) • Stripped speaker wire is touching another set terminal. • Stripped wires are touching each other due to excessive removal of Make sure not even 1 strand of wi
ページ10に含まれる内容の要旨
Home Theater System + Tape Recorder/Player / AM/FM Tuner + TV OR YOUR TAPE RECORDER/PLAYER RL DVD IN OR AUX IN YOUR AM/FM TUNER OR R and L stand for RIGHT channel and LEFT channel YOUR TV SET This will allow the sound of the tape recorder/player, AM/FM tuner or TV to be played through the HOME THEATER SYSTEM. Home Theater System + TV + DVD Player / VCR / TV Game / Video Camera YOUR DVD, VCR, TV GAME OR VIDEO CAMERA AUDIO OUT VIDEO OUT R L RL 1 DVD OR VCR DVD IN 2 TV GAME OR VIDEO CAMERA AUX IN
ページ11に含まれる内容の要旨
Home Theater System + TV + Satellite SATELLITE RECEIVER / CABLE BOX OUT TO TV SATELLITE IN AUDIO OUTPUT RL DVD IN AUX IN CABLE OR ON AIR ANTENNA/ SATELLITE SIGNAL RF (coaxial) cable unchanged, same as before VIDEO ANT IN IN This will allow the sound of satellite to be played through the HOME THEATER SYSTEM, and you will hear the sound from both the TV and the HOME THEATER SYSTEM, this is normal. Home Theater System + CD / MP3 / PC / Radio or other Source with 3.5mm Stereo Jack YOUR CD/MP3 PLAYER
ページ12に含まれる内容の要旨
ON/STANDBY ON/STANDBY Remote SOURCE MASTER VOLUME indicator button sensor button buttons R L DVD IN AUX IN OUTPUT LEFT FRONT RIGHT LEFT REAR RIGHT + T 1.25AL/250V POWER switch AC power plug General 1 After completing all SPEAKER and AUDIO connections, plug the AC power plug into a 120V 60 Hz wall outlet and flip POWER switch on the back of the main set to ON position, the system enters STANDBY mode and the ON/STANDBY indicator will flash in red. This plug is polarized, if it does not fit your ou
ページ13に含まれる内容の要旨
7 To momentarily shut off the sound, press the MUTE button and the ON/STANDBY indicator will flash in green continuously. Press the MUTE button again or press the MASTER VOLUME buttons to restore the sound and the ON/STANDBY indicator will stop flashing and be steadily on in green. 8 To select the listening mode, press the CHANNELS button on the REMOTE CONTROL. NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to ON, the sound will come out of
ページ14に含まれる内容の要旨
Symptom Remedy 1. Is the power cord firmly plugged into the power outlet? Insert the AC power plug securely into the power outlet. Make sure your outlet has power, you can check this by plugging a lamp into the outlet to see if it works. 2. Is the main power switched to off? Flip it to ON. 3. One of the safety mechanisms may be operating. In this event, unplug the No power. player from the power outlet briefly and then plug it in again to reset the set. 4. Your set’s fuse may have blown. 5. Unsc
ページ15に含まれる内容の要旨
General Power requirements ----- AC 120V, 60Hz Power consumption ------60 Watts Main set Dimensions ---- 6 7/8 x 9 1/4 x 11 1/2 inches / 17.4 x 23.5 x 29.2 cm Weight -----------------------7.7 lbs / 3.5 kg Audio Power Output Total output power: 40Watts (THD 10%), 60 Watts (Maximum) Distortion 0.06% @ reference output Remote Operating Range Within 20 feet between the main set and the remote. Replacement Fuse Time delay 1.25 Amp T type (slow blow) glass fuse 250V. Speakers Front Left -------------
