ページ1に含まれる内容の要旨
DVD DIGITAL CINEMA SYSTEM
SYSTEMA DVD DIGITAL CINEMA
TH-A10
Consists of XV-THA10, SP-PWA10, SP-XCA10, and SP-XSA10.
Consta de XV-THA10, SP-PWA10, SP-XCA10, y SP-XSA10.
SP-XSA10 SP-XCA10 SP-XSA10
SP-PWA10 XV-THA10
VIDEO CD
INSTRUCTIONS
For Customer Use:
INSTRUCCIONES
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0516-006A
[ 4U ]
ページ2に含まれる内容の要旨
Warnings, Cautions and Others/Avisos, Precauciones y Varios Caution –– button! CAUTION Disconnect the XV-THA10 and SP-PWA10 main plugs to shut To reduce the risk of electrical shocks, fire, etc.: the power off completely. The button on the XV-THA10 in 1. Do not remove screws, covers or cabinet. any position do not disconnect the meins line. The power can be 2. Do not expose this appliance to rain or moisture. remote controlled. PRECAUCIÓN Precaución –– Botón ! Para reducir el riesgo de descar
ページ3に含まれる内容の要旨
Table of Contents Getting Started ........................................................................................... 2 Selecting the Picture Character [THEATER POSITION] .......... 32 Important cautions ........................................................................ 2 Repeating a current title, chapter or track, or all tracks Safety precautions ......................................................................... 2 [REPEAT] ..................................................
ページ4に含まれる内容の要旨
Getting Started Important cautions Checking the supplied accessories Check to be sure you have all of the following items, which are Installation of the unit supplied with the unit. • Select a place which is level, dry and neither too hot nor too cold The number in the parentheses indicates quantity of the pieces between 5°C and 35°C (41°F and 95°F). supplied. • Leave sufficient distance between the unit and the TV. • Do not use the unit in a place subject to vibrations. Power cord • Do not hand
ページ5に含まれる内容の要旨
System outline This system consists of the center unit containing a DVD player, a radio, and a pre-amp, as well as the powered sub woofer, the center speaker, and four satellite speaker units. It provides a fully functional DVD theater system by simply connecting to a TV set. Center speaker (SP-XCA10) Front left speaker Front right speaker TV Satellite speaker Satellite speaker (SP-XSA10) (SP-XSA10) Rear left speaker Rear right speaker Satellite speaker Satellite speaker (SP-XSA10) (SP-XSA10) Th
ページ6に含まれる内容の要旨
Installation To attach non-slip rubbers to the center To hang satellite speakers from the wall speaker Use the supplied bracket to fix satellite speakers to the wall. Attach the supplied non-slip rubbers at three points on the bottom of the center speaker. CAUTION: ATTACHING THE BRACKETS ON THE WALL When attaching the brackets on the wall, have them attached The non-slip rubbers are adhesive. to the wall by a qualified person. Peel off the seal before applying. DO NOT attach the brackets on the
ページ7に含まれる内容の要旨
About discs Playable disc types Disc structure Playable and non-playable disc types are as follows: A DVD disc is comprised of “titles”, while an Audio CD, Video CD or SVCD is comprised of “tracks”. Each title may be divided into some “chapters”. For example, if a DVD disc contains some movies, Playable discs ——————————————— each movie, each movie may have its own title number, and each movie may be divided into some chapters. In a DVD karaoke disc, each song usually has its own title number and
ページ8に含まれる内容の要旨
Connections Connecting the FM and AM antennas To connect the powered sub woofer Use the supplied system cable to connect the powered sub woofer FM antenna connections ——————————— (SP-PWA10). Center unit (XV-THA10) Ensure that the £ mark on the plug faces upwards. A. Using the supplied FM antenna System The FM antenna provided can be connected to the FM 75 W cable COAXIAL terminal as temporary measure. (supplied) Ensure that the £ B. Using the standard type connector (Not supplied) mark on the pl
ページ9に含まれる内容の要旨
Connections VIDEO OUT SELECT This unit is compatible with the PAL and NTSC color systems. Set the VIDEO OUT SELECT on the rear panel to match the color system of your TV in standby mode. Make sure that the color system of DVD/Video CD/SVCD disc labeled on the package matches your TV. To connect speakers Connect the satellite speakers and center speaker to the terminals on the powered sub-woofer using the speaker cords supplied. Labels are attached to the speaker cords to indicate the speaker an
ページ10に含まれる内容の要旨
Connections Video component connections ————————— Connecting Audio/Video Components Use the cable with RCA pin plugs (not supplied). Connect the white plug to the audio left jack, the red plug to the You can connect the following audio/video components to this audio right jack, and the yellow plug to the composite video jack. system. If your video components have S-video (Y/C-separation) terminals, Refer also to the manuals supplied with your components. connect them using S-video cable (not sup
ページ11に含まれる内容の要旨
Connections TV audio or DBS tuner TV sound DBS tuner To audio output TV To S-video output To audio To composite output DBS tuner video output Note: • When connecting the DBS tuner to the TV SOUND/DBS jacks, change the source name, which will be shown on the display when selected as the source, to “DBS”. See page 17 for details. Digital connections ————————————————————————————————————— The center unit has three digital input terminals (one digital coaxial terminal and two digital optical termin
ページ12に含まれる内容の要旨
Connections Connecting the power cord Putting batteries in the remote control Before plugging the center unit and powered sub-woofer into an AC Before using the remote control, put two supplied batteries first. outlets, make sure that all connections have been made. When using the remote control, aim the remote control directly at the remote sensor on the center unit. Plug the power cord into an AC outlet. The red STANDBY lamp on the center unit lights when the power cord is plugged in. Primary
ページ13に含まれる内容の要旨
Parts Identification Become familiar with the buttons and controls on the unit before use. Refer to the pages in parentheses for details. Center unit ——————————————————————————————————————— Front panel 1 button and STANDBY lamp (16) 1 2 3 4 2 Remote sensor (10) 3 Disc tray (22) 4 DVD CONTROL buttons (22~24) 5 VOLUME +/ – button (16) 6 DSP MODE/INPUT ATT. (19, 20, 21) 7 SURROUND/SOURCE NAME (17, 21) 8 SOURCE (17) p 9 87 6 5 9 Display window p Audio channel lamp (19) Display window 4 5 1 2 3 6 9 8
ページ14に含まれる内容の要旨
Parts Identification Remote controls ——————————————————————————————————————— Primary remote control Secondary remote control 1 w 1 2 8 e r 2 3 4 t 5 6 3 9 7 4 y 8 p u 5 9 i p 6 o q ; 7 a s 1 SLEEP button (20) 1 SLEEP button (20) 2 ANALOG/DIGITAL INPUT button (18) 2 Source selecting buttons (17) 3 TITLE button (24) 3 MENU button (24) 4 SUBTITLE button (29) 4 Cursor and ENTER buttons 5 MAIN ON SCREEN button (39) 5 THEATER POSITION button (31) 6 DVD ON SCREEN button (26, 46) 6 Operating buttons 7 M
ページ15に含まれる内容の要旨
Principles of operation The system may be operated via the remote control or the buttons on the center unit, or via the menu on the screen. Operation with the remote control Select the appropriate mode for the remote control when using the primary or secondary remote control is used for operation. The remote control mode is selected by pressing the source selecting buttons. Press DVD : The number buttons and operating buttons operate in the DVD mode, enabling operation of the DVD, audio CD, Vide
ページ16に含まれる内容の要旨
Principles of operation To operate via the on-screen menu When using the on-screen menu, first display it and then use the primary or secondary remote control unit cursor buttons (2/3/5/°), the number buttons, and the ENTER button. Displaying the on-screen menu ————————————————————————————————— The method and conditions for display differ with the on-screen menu. The individual functions are described below. Number buttons Cursor and ENTER buttons Cursor and ENTER buttons On-screen menu componen
ページ17に含まれる内容の要旨
Principles of operation On-screen menus —————————————— On-screen menus for using discs ———————— This system supports the following on-screen menus. The disc status and items are displayed as follows on the on-screen menus for using the disc. Opening screens VCD CONTROL display for DVD (No disc inserted) DVD CONTROL display (for Video CD) for Video CD/SVCD for Audio CD On-screen menus for using and setting up the AV amp function VCD CONTROL display (for SVCD) CD CONTROL display On-screen menus fo
ページ18に含まれる内容の要旨
Basic operations The basic operations for this system are as follows. To turn TV power ON and OFF To turn the system power supply JVC TVs may be used as is with the primary and secondary remote controls. TVs from other manufacturers require changes to the ON and OFF (standby) transmittable signals before they can be used with the primary and secondary remote controls. See page 57 for details of changing the From the remote controls: transmittable signals. Primary remote control Secondary remote
ページ19に含まれる内容の要旨
Basic operations On the front panel: Muting the sound From primary remote control only: MUTING SOURCE Press SOURCE until the source name you want appears on the display. Press MUTING to mute the sound through all speakers The source changes as shown below each time the button is pressed. connected. “MUTING” appears on the display window and volume turns off. = DVD = TAPE (or MD) = VCR = AM = FM = TV SOUND (or DBS) = AUX = (back to the beginning) To restore the sound, press MUTING again so that
ページ20に含まれる内容の要旨
Basic operations To return to analog audio Selecting the analog or digital input 1. Select a digital source to return to analog audio. mode Select from “MD DIGITAL”, “AUX DIGITAL”, or “DBS DIGITAL”. When you have connected some components such as MD recorder, the DBS tuner and so on, using digital terminals (see page 9), you need to 2. Press ANALOG/DIGITAL INPUT to select [ANALOG]. change the input mode for these components to the digital input. Analog audio is selected and the source name also
