ページ1に含まれる内容の要旨
®
JBL CINEMA SOUND
CST56, CSB6, CSC56, CSS11
OWNER’S MANUAL
ページ2に含まれる内容の要旨
IMpOR t ANt SAfEty INStRUCtIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. D o not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat
ページ3に含まれる内容の要旨
ABLE t Of CONtENtS ® Thank You For Choosing This JBL Product .........................................................................4 Included Items .....................................................................................................................4 Speaker Placement .............................................................................................................5 Wall-Mounting the CSC56 and CSB6 ....................................................................
ページ4に含まれる内容の要旨
® thANk yOU fOR ChOOSINg htIS JBL pRODUCt ® For more than 60 years, JBL products have been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the JBL system you have chosen will provide every note of enjoyment that you expect – and that when you think about purchasing additional audio equipment for your home, car or office, you will once again choose JBL equipment. Please ta
ページ5に含まれる内容の要旨
SpEAkER LACEMEN p t FRONT SPEAKERS CENTER-CHANNEL SPEAKER SUBWOOFER 0 – 2 ft 0 – 0.6m Listening position SURROUND SPEAKERS Alternate placement for surround speakers when only 5.1 channels are used; required placement for surround back speakers in 7.1-channel systems. † Single surround back speaker may be used with 6.1-channel receivers and processors. The front speakers should be placed the same distance from each other as they are from the listening position. The CS
ページ6に含まれる内容の要旨
WALL-MOUNtINg thE CSC56 AND CSB6 The CSC56 center channel and the CSB6 are designed to be mounted on the wall. There are two (2) fixed-mount wall brackets provided for the CSC56, and one for the CSB6. Each speaker bracket will require up to three 1-1/2" #10 wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriate for a 1-1/2" #10 screw. NOTE: The customer is responsible for the correct selection and use of mounting hardware (avail
ページ7に含まれる内容の要旨
SEA p ER CONNEC k IONS t CONNECTION TIPS Separate and strip the ends of the speaker wire as shown. Speakers and other electronic components have corresponding (+) and (–) terminals. Most manufacturers of speakers and electronics, including JBL electronics, use red to denote the (+) terminal and black to denote the (–) terminal. The (+) lead of the speaker wire is noted with a stripe. It is important to connect both speakers ident
ページ8に含まれる内容の要旨
SpEAkER CONNECtIONS ® ® DOLBy DIgIt AL OR DtS (OR OthER DIIg t AL SURROUND MODE) CONNECtION Use this installation method for Dolby Digital, DTS or other digital surround processors: RECEIVER SUBWOOFER L LINE LFE LFE OU T LEVEL R IN Use the line-level input jack marked “LFE” for the Low-Frequency Effects channel. Connect this jack to the LFE output or subwoofer output on your receiver or amplifier. Connect each speaker to the corres
ページ9に含まれる内容の要旨
SUBWOOER O f ERA p ION t Press the Master Power switch (marked “Power” å) to the On position to use the subwoofer. The CSS11 subwoofer will automatically turn on or go into Standby (sleep) mode as described below. When your receiver or amplifier is off, or is not sending program material to the subwoofer, the subwoofer will be in standby mode (the LED on the front of the CSS11 will be red). When the subwoofer senses an audio signal, it will automatic
ページ10に含まれる内容の要旨
tROUBLESOO h tINg pROBLEM SOLUtION If there is no sound from any of the • Check that receiver/amplifier is on and a source is playing. speakers: • Check that the powered subwoofer is plugged in and is turned on (Power switch å pushed in). • Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured or touching each other. • Review proper operation of your receiver/amplifier. If t
ページ11に含まれる内容の要旨
SpECIfICA IONS t SYSTEM Frequency response: 27Hz – 30kHz (–6dB) CST56 CSB6 CSC56 Maximum recommended 150W* 125W* 150W* amplifier power: Power handling: 50W continuous/300W peak 40W continuous/300W peak 50W continuous/300W peak Frequency response: 55Hz – 30kHz (–6dB) 60Hz – 30kHz (–6dB) 55Hz – 30kHz (–6dB) Nominal impedance: 8 ohms 8 ohms 8 ohms Sensitivity: 90dB @ 1 watt/1 meter 88dB @ 1 watt/1 meter 90dB @ 1 watt/1 meter Tweeter: 3/4" (19mm) titanium-laminate 3/4" (19mm) titanium-laminate 3/4"
ページ12に含まれる内容の要旨
Harman Consumer, Inc. 8500 Balboa Blvd., Northridge, CA 91329 USA © 2010 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. PolyPlas and HeatScape are trademarks of Harman International Industries, Incorporated. Dolby and Pro Logic are registered trademarks of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc. Part No.
