ページ1に含まれる内容の要旨
Model SL6.2M
Extended Range
High Output Speaker
Key Features:
• 46 Hz – 20 kHz Response
250W Power Handling
90 dB High Sensitivity
Full-Bandwidth overload protection
TM
Strong-Arm-Mount for easy, flexible
aiming
Lightweight, unobtrusive plastic enclo-
sure
Easy access input terminals
General Description: Technical Specifications:
The SL6.2M provides high efficiency, high power 1
Frequency Response(z -10 dB) 48 Hz - 20 kH
handling, and extended frequency response in a very
2
Power Han
ページ2に含まれる内容の要旨
EVID SL6.2M Step 2: Mount the Speaker to the Packing List Product Feature Identification Installation and Wiring SAM™ Bracket Listed and illustrated below are the parts in- Illustrated below are the major components Step 1: Mount the SAM™ Bracket Attach the speaker to the SAM™ bracket cluded in each boxed pair of EVID™ speakers. of the EVID™ Series full-range speakers. The SAM™ bracket can be mounted on with the socket head bolt, as shown in Figure Quantity Part either side of the speaker, enabl
ページ3に含まれる内容の要旨
Troubleshooting Table Problem Possible Cause(s) Action Attach both logo caps as shown in Figure 8 Step 4: Secure the Seismic Tab after tightening and securing the speaker. Connection Point 1. No sound Amplifier Connect a known working test speaker to the amplifier The rear of the enclosure includes an eye- outputs. If there is no sound, check that all the elec- tronics are on, the signal routing is correct, the source bolt for connection to a seismic restraint. EV logo cap EV logo cap is active,
ページ4に含まれる内容の要旨
Architecture & Engineering Specs: Frequency Response and Impedance: The loudspeaker shall be a two-way system consisting of one 6” (152mm) low-frequency transducer, a 1” (25mm) high-frequency transducer with a Coherent Coverage Waveguide, and a frequency- dividing network installed in a vented, line-array enclosure. The network shall include a passive limiter for both the low-frequency and high-frequency transducers. The loudspeaker system shall meet the following performance criteria: Power han
