ページ1に含まれる内容の要旨
DVD HOME THEATER SYSTEM
R
2
VCR
CD-R VIEWER
AV INPUT
OWNER'S MANUAL
ページ2に含まれる内容の要旨
Important Safety Instructions The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to WARNING the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) WARNING: TO REDUCE THE RISK OF ELECTRIC instructions in
ページ3に含まれる内容の要旨
Important Safety Instructions 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Water and Moisture - The appliance should not be used near water
ページ4に含まれる内容の要旨
Table of Contents Repeat Playback ........................................ 24 Important Safety Instruction ..................... 1-2 Repeating a title/chapter (DVD) ............................ 24 Disc Formats ................................................ 4 Repeating a single track/whole disc (CD) ........... 24 Before You Start ........................................... 5 Repeating a specific section (DVD) ...................... 24 Using the remote control .................................
ページ5に含まれる内容の要旨
Disc Formats The Unit can playback. DVDs Compatible [8cm(3")/12cm(5”) disc] Audio CDs [8cm(3")/12cm(5”) disc] Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this Unit, this Unit cannot play that disc. 1 The region number of this Unit is 1. Disc Function or Operation that is Not A
ページ6に含まれる内容の要旨
Before You Start Using the Remote Control • Point the Remote Control at the REMOTE SENSOR located on the Unit. • When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation. • The recommended effective distance for remote operation is about 16 feet (5 meters). To install Batteries 1.Open the battery door. 2.Insert two "AA" or UM-3 size batteries. Battery Replacement When batteries become weak, the operating distance of
ページ7に含まれる内容の要旨
Parts and Functions Remote Control 1) STANDBY / ON button Turns the Unit on and puts it in standby mode. 2) RETURN button OPEN/ STANDBY/ON Return to the normal operation after using the SETUP CLOSE RETURN FUNCTION menu. 1 3) Number (0 - 9) and (+10) buttons GOTO 2 Use when creating programs, and entering a parental level password. To select numbers over 9, press +10 button and then the second no. for example, to enter 18, press +10 and then 8. 3 4) 5.1 / 2.1 CHANNELS button Switch speaker outpu
ページ8に含まれる内容の要旨
Parts and Functions Remote Control 19) FUNCTION button 19 Display the FUNCTION screen where you can check OPEN/ or change various setting. STANDBY/ON CLOSE 20) OPEN / CLOSE button RETURN FUNCTION 20 Use to open or close the disc tray. GOTO 21) GOTO button 21 Skip directly to a specific location on a DVD disc. 22) SOUND button Selects sound balance and tone controls for adjustment with the cursor buttons. 23) P. SCAN / CVBS button P. SC AN / MEMORY SOUND CVBS Changing YUV output to Progressive Sc
ページ9に含まれる内容の要旨
Parts and Functions Front and Top Panel 1) Disc tray 5) PLAY button Open or close tray by pushing OPEN/CLOSE button. Press to start or resume playback Place a disc on the disc tray, label side up. 6) STOP button 2) STANDBY indicator Stop playing a disc. When the Unit is turned on by pressing the 7) FUNCTION button STANDBY/ON button, the light will illuminate a few Select the source. seconds. If you press the STANDBY /ON button on 8) VOLUME controls the remote control, the Unit will turn off and
ページ10に含まれる内容の要旨
Display Front Panel Display REPEAT 1 playback indicator DOLBY PRO LOGIC II indicator Displayed during repeat a CD When Dolby Pro Logic sound playback. is selected in AV_IN mode, the light will illuminate. DOLBY DIGITAL indicator Displays while Dolby Digital REPEAT A-B playback sound processing is being indicator performed or when the Displayed during repeat a loaded disc contains Dolby specific section of DVD Digital sound playback. ANGLE indicator OPERATION indicator MEMORY indicator Appears wh
ページ11に含まれる内容の要旨
Setup A. Connecting a TV The Unit can be connected to your TV in several different ways, depending on the design of your TV. RCA Audio/Video cable Use the supplied Audio/Video cable. 1. Connect the VIDEO OUT and left/right AUDIO OUT jacks on the unit to the VIDEO IN and left/right AUDIO IN jacks on your TV. To wall Audio/Video cable (supplied) outlet (red) (w hite) (yellow) Note: • If you want the sound come from the speakers of the Main Unit, you need not to connect the left/right AUDIO OUT ja
ページ12に含まれる内容の要旨
Setup or Component video outputs (DVD) Some TVs or monitors are equipped with component video inputs. Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks on your TV and the Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your Unit to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on your TV and the Red plug PR/CR VIDEO OUT jack on your Unit t
ページ13に含まれる内容の要旨
Setup B. Connecting a VCR 1. Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your TV, connect the left/right AUDIO OUT jacks on your Unit to left/right AUDIO IN jacks on your TV. If you want the sound come from the speakers of the Main Unit, you need (yellow) (red) (white) Audio cable (not supplied) not to connect the left/right AUDIO To wall (w hite) outlet OUT jacks from the Main Unit to your (red) TV. Video cable (not suppli
ページ14に含まれる内容の要旨
Setup D.Connecting the speakers & FRONT (RIGHT) REAR (RIGHT) REAR (LEFT) FRONT (LEFT) subwoofer The speaker cords have been color-coded to simplify connection. Just plug the POSITIVE (+) and NEGATIVE (-) ends of each speaker wire into the corresponding jacks on the rear of the Unit, matching the color tube on the end of the speaker wire to the color-coded connector. IMP. 6 ohm RIGHT LEFT FRONT REA R REAR FRO NT SUBWOOFER CENTER IM P. 3 ohm IM P. 6 ohm To wall outlet SUBWOOFER CENTER E. Positioni
ページ15に含まれる内容の要旨
Setup Mounting rear surround speakers 1) Mark the correct mounting position on the wall. 2) Insert a fixing screw(s) at the marked position on the wall. 3) Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked. Need More Help? DO NOT RETURN THIS TO THE STORE Please call Customer Service at 1-800-252-6123 or visit online help at http://www.1800customersupport.com Turning on the Unit and TV 1)Press the STANDBY/ON button to turn the Unit ON, or
ページ16に含まれる内容の要旨
Adjusting the Sound To adjust the surround sound balance while Dolby Digital and Dolby Pro Logic II decoding is in effect Use the remote control to make the following changes to speaker balance: Front speaker (left) Press the SOUND button repeatedly to display , then press the or CURSOR button to adjust the sound level. It will show on the display of the Unit. Front speaker (right) Press the SOUND button repeatedly to display , then press the or CURSOR button toadjust the sound level. It
ページ17に含まれる内容の要旨
Adjusting the Sound Pro Logic Emulation Mode (EMU) The Pro Logic emulation mode offers users the same robust surround processing as original Pro Logic, in case the source content is not of optimum quality, or if there is a desire to hear the program more "as it used to be". When this mode is used, it is called Pro Logic, as before. There is no "Pro Logic I" mode. The Pro Logic emulation mode is optional. Dolby does not require PLII products to use the original Pro Logic decoding algorithm. Howev
ページ18に含まれる内容の要旨
DVD CD Playing a Disc Basic playback This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer to the instruction notes of discs. “ ” may appear on the TV screen during operation. A “ ” means that the desired operation is not permitted by the DVD Unit or the disc. Playing a Dis
ページ19に含まれる内容の要旨
Playing a Disc DVD CD Fast Forward/Fast Reverse 1. Press the SEARCH or SEARCH button when a disc is playing. • The disc begins fast scan at x2 speed. • Four speeds are available. Each time SEARCH or SEARCH button is pressed, the speed of fast scan changes in the following sequence: Note : You also can press SEARCH button on the remote repeatedly to select different fast scan speed. 2.Press the PLAY button when you reach the desired point to resume playback at normal speed. DVD Slow-motio
ページ20に含まれる内容の要旨
DVD Playing a Disc Angle selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of the current angle. 2.Press the ANGLE button repeatedly to change the scene to the next angle in those recorded. • About two seconds later, playback continues from the new angle you selected. •
