ページ1に含まれる内容の要旨
4-452-002-14(1)
Operating Instructions US
Home Theatre
Mode d’emploi FR
System
Manual de instrucciones ES
HT-CT660
ページ2に含まれる内容の要旨
For the customers in the U.S.A This symbol is intended to alert WARNING the user to the presence of uninsulated “dangerous To reduce the risk of fire or voltage” within the product’s electric shock, do not expose this enclosure that may be of sufficient apparatus to rain or moisture. magnitude to constitute a risk of electric shock to persons. The unit is not disconnected from the AC power source (mains) as long as it is This symbol is intended to alert connected to the wall outlet, e
ページ3に含まれる内容の要旨
9) Do not defeat the safety purpose of NOTE: the polarized or grounding-type plug. This equipment has been tested and A polarized plug has two blades with found to comply with the limits for a one wider than the other. A Class B digital device, pursuant to Part 15 grounding type plug has two blades of the FCC Rules. These limits are and a third grounding prong. The designed to provide reasonable wide blade or the third prong are protection against harmful interference provided for your saf
ページ4に含まれる内容の要旨
This equipment must not be co-located or operated in conjunction with any other Precautions antenna or transmitter. On safety This equipment complies with FCC radiation exposure limits set forth for an
=> Should any solid object or liquid fall into uncontrolled environment and meets the the system, unplug the system and FCC radio frequency (RF) Exposure have it checked by qualified personnel Guidelines in Supplement C to OET65. before operating it any further. This equipment has very low le
ページ5に含まれる内容の要旨
On placement On cleaning
=>Place the system in a location with Clean the system with a soft dry cloth. Do adequate ventilation to prevent heat not use any type of abrasive pad, buildup and prolong the life of the scouring powder or solvent such as system. alcohol or benzine.
=>Do not place the system near heat If you have any question or problem sources, or in a place subject to direct concerning your system, please consult sunlight, excessive dust, or mechanical your nearest Sony dealer.
ページ6に含まれる内容の要旨
“x.v.Color” and “x.v.Color” logo are Effective communication range trademarks of Sony Corporation. BLUETOOTH devices should be used within approximately 10 meters “WALKMAN” and “WALKMAN” logo are (33 feet) (unobstructed distance) of registered trademarks of Sony each other. The effective Corporation. communication range may become shorter under the following “PlayStation ” is a registered trademark ® conditions. of Sony Computer Entertainment Inc.
=> When a person, metal object, wall or
ページ7に含まれる内容の要旨
=>Noise may occur or the audio may cut Effects on other devices off depending on the BLUETOOTH The radio waves broadcast by this device connected with this system, the system may interfere with the communications environment, or operation of some medical devices. surrounding conditions. Since this interference may result in malfunction, always turn off the power on this system, BLUETOOTH mobile phone and BLUETOOTH device in the following locations:
=> In hospitals, on trains, in airplan
ページ8に含まれる内容の要旨
Table of contents Precautions ................................4 Additional Information BLUETOOTH wireless Troubleshooting ...................... 31 technology ...........................6 Specifications ..........................34 Index ........................................37 Getting Started Unpacking ..................................9 Index to parts and controls .... 10 Connecting a TV, player, etc. ...................................... 14 Positioning the system ........... 16 Setting u
ページ9に含まれる内容の要旨
Getting Started Getting Started Unpacking
=> Subwoofer (SA-WCT660) (1) Inserting batteries into the remote control Insert two R6 (size AA) batteries (supplied) by matching the and ends on the batteries to the diagram inside the battery compartment of the remote control. To use the remote
=> Sound Bar (SA-CT660) (1) control, point it at the remote control sensor at the front of the Sound Bar.
=> Digital optical cable for a TV (1)
=> Side stand (for front-facing installation) (2) Notes
=>
ページ10に含まれる内容の要旨
Index to parts and controls For more information, see the pages indicated in parentheses. Sound Bar (on/standby) button Message display area Displays volume, selected input PAIRING button (page 23) source, etc. INPUT button NIGHT (page 28) Press to select the input source to Lights up in NIGHT mode. play back. HDMI VOL (volume) +/ buttons Lights up when an HDMI signal is N mark selected as the input source. (remote control sensor) OPT Illumination LED Lights up when
ページ11に含まれる内容の要旨
Getting Started Jacks (on the rear of Sound Bar) AC power cord (mains lead) OPTICAL IN jack (page 14, 15) (page 14) HDMI TV OUT (ARC) jack HDMI IN 1/IN 2 jacks (page 14) (page 14) ANALOG IN jack (page 15) HDMI IN 3 jack (page 14) Subwoofer (on/standby) indicator (on/standby) button LINK button (page 30) AC power cord (mains lead) (page 14) continued US 11
ページ12に含まれる内容の要旨
To control the system Remote control INPUT (page 19) Press to select the equipment you This section describes how to operate want to use. the subwoofer, Sound Bar, and (on/standby) connected equipment using the remote control supplied. If you cannot SOUND FIELD +/ (page 26) operate the connected equipment, SOUND FIELD (page 26) use the remote control of the DISPLAY equipment. Each time you press the button, the display turns on or off. Note When the system is operated, the
ページ13に含まれる内容の要旨
Getting Started To control a BLUETOOTH device / To go to the beginning of the previous or next music. / To fast reverse or to fast forward the music when pressed during playback. Playback operation * (playback)/ (pause)/ (stop) Starts/pauses/stops playback. To resume normal playback during pause, press (pause) again. Note The above explanations are intended to serve as an example only. Depending on the equipment, the above operations may not be possible, or may operate
ページ14に含まれる内容の要旨
Connecting a TV, player, etc. Before connecting the AC power cord (mains lead) to a wall outlet (mains), connect all other equipment and a TV to the system. No cable connection is required between the Sound Bar and the subwoofer because they can be connected wirelessly. Connecting a TV If you connect the system to a TV compatible with the Audio Return Channel (ARC) technology via an HDMI input jack with “ARC” indicated, you do not need to connect a digital optical cable. If the digital opt
ページ15に含まれる内容の要旨
Getting Started Tip
=>Even if the system is turned off (active standby mode), the HDMI signal will be sent from the connected equipment to the TV via the HDMI connection. You can enjoy image and sound from the equipment on the TV. Connecting equipment with an HDMI jack HDMI OUT HDMI cable (not supplied) “PlayStation 3,” Blu-ray Disc™ player, ® DVD player, satellite tuner, cable television tuner, etc. Connecting audio equipment Audio signal OUT Audio cable (not supplied) Smartphone, “Walkma
ページ16に含まれる内容の要旨
Positioning the system The illustrations below are examples of how to install the Sound Bar. Installing the Sound Bar
=> Installing the Sound Bar on a rack
=> Installing the Sound Bar on a wall (page 17) (page 17) Notes
=>Take following precautions when installing the Sound Bar and the subwoofer. Do not block the ventilation holes on the rear panel. Do not place the Sound Bar and the subwoofer in a metal cabinet. Do not place an object such as an aquarium between the Sound Bar and the subwo
ページ17に含まれる内容の要旨
Getting Started 2 Attach a side stand (for upward- Installing the Sound Bar on tilting installation) to each side. a rack To install the Sound Bar facing front 1 Attach a side stand (for front- facing installation) to each side. Installing the Sound Bar on a wall You can install the Sound Bar on the wall. Notes
=> Use screws that are suitable for the wall To install the Sound Bar tilting material and strength. As a plaster upward board wall is especially fragile, attach the screws securel
ページ18に含まれる内容の要旨
1 Prepare screws (not supplied) 4 Hang the Sound Bar onto the that are suitable for the holes on screws. the back of the Sound Bar. Align the holes on the back of the Sound Bar to the screws, then hang the Sound Bar onto the 4 mm 2 screws. (3/16 inches) More than 25 mm (1 inch) 5 mm (7/32 inches) 9 mm (3/8 inches) Setting up the Wireless Hole on the back of the Sound Bar System 2 Fasten the screws to the wall. The Sound Bar transmits sound from The screws should protrude 6 to the equ
ページ19に含まれる内容の要旨
Operations and Features Using the Control for Operations and Features HDMI function Operating the system By enabling the Control for HDMI function (CTRL, page 28), and using the supplied connecting equipment that is remote control compatible with the Control for HDMI function via an HDMI cable, operation is simplified with the features below. 1 Turn on the system. 2 Press INPUT to display the input System Power Off source on the front panel display of the Sound Bar. When you turn off t
ページ20に含まれる内容の要旨
One-Touch Play Using “BRAVIA” Sync When you play the equipment features connected to the system with an HDMI cable, the connected TV is turned on The original Sony functions listed automatically and the input signal of below can also be used with products the system is switched to the that are compatible with “BRAVIA” appropriate HDMI input. Sync. Notes
=>The above features may not operate Power save with certain equipment.
=>Depending on the settings of the If a “BRAVIA” Sync-compatibl
