ページ1に含まれる内容の要旨
2-660-929-12(1)
DVD Home Theatre
System
Operating Instructions
DAV-FX900W
©2006 Sony Corporation
ページ2に含まれる内容の要旨
3 and on, the user is encouraged to try to correct the interference by one or more of the following measures: WARNING – Reorient or relocate the receiving antenna (aerial). To reduce the risk of fire or electric – Increase the separation between the equipment and shock, do not expose this apparatus to receiver. rain or moisture. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Caution – The use of optical instruments – Consult the
ページ3に含まれる内容の要旨
If the unit is brought directly from a cold to a warm location, moisture may condense inside the DVD Home Theatre System and cause damage to the lenses. When you first install the unit, or when you move it from a cold to a warm location, wait for about 30 minutes before operating the unit. XM is a registered trademark of XM Satellite Radio Inc. Welcome! Thank you for purchasing Sony DVD Home Theatre System. Before operating this system, please read this manual thoroughly and retain it
ページ4に含まれる内容の要旨
Table of Contents Welcome!................................................3 Resuming Playback from the Point Where About This Manual .................................6 You Stopped the Disc..................... 43 This System Can Play the Following (Resume Play) Discs .................................................6 Creating Your Own Program................ 44 (Program Play) Getting Started – BASIC – Playing in Random Order..................... 45 Step 1: Assembling the Speakers (Shuffle Play
ページ5に含まれる内容の要旨
Changing the Brightness of the Front Panel Display..................................70 Advanced Settings and Adjustments Locking Discs .......................................71 (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) Getting Optimal Surround Sound for a Room ..............................................74 (SPEAKER FORMATION) Calibrating the Appropriate Settings Automatically .................................76 (AUTO CALIBRATION) Using the Setup Display........................78 Settin
ページ6に含まれる内容の要旨
About This Manual This System Can Play the Following Discs The instructions in this manual describe the controls on the remote. You can also use the controls on the system if they have the same or Format of Disc logo similar names as those on the remote. discs The Control Menu items may be different DVD VIDEO depending on the area. “DVD” may be used as a general term for DVD VIDEOs, DVD+RWs/DVD+Rs, and DVD-RW/ DVD-RWs/DVD-Rs. DVD-R Measurements are expressed in feet (ft) for Nor
ページ7に含まれる内容の要旨
The disc will not play if it has not been correctly Note about CDs/DVDs finalized. For more information, see the operating instructions for the recording device. The system can play CD-ROMs/CD-Rs/CD- Note that some playback functions may not RWs recorded in the following formats: work with some DVD+RWs/DVD+Rs, even if – audio CD format they have been correctly finalized. In this case, – CD Graphics (Latin American models only) view the disc by normal playback. Also some – video CD format D
ページ8に含まれる内容の要旨
Region code Your system has a region code printed on the rear of the unit and will only play DVDs labeled with the same region code. ALL DVD VIDEOs labeled will also play on this system. If you try to play any other DVD VIDEO, the message [Playback prohibited by area limitations.] will appear on the TV screen. Depending on the DVD VIDEO, no region code indication may be given even though playing the DVD VIDEO is prohibited by area restrictions. Note on playback operations of DVDs and V
ページ9に含まれる内容の要旨
Getting Started – BASIC – Getting Started – BASIC – See Unpacking in Specifications, page 92. Inserting batteries into the remote You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the system. Note Do not leave the remote in an extremely hot or humid place. Do not use a new battery with an old one. Do not drop
ページ10に含まれる内容の要旨
Step 1: Assembling the Speakers and Installing the Surround Amplifier Before connecting the speakers, attach the speaker stand to the speaker. About how to connect the speaker cords to the SPEAKER jacks, see page 17. The IR receiver cord should be used for the surround speaker (L) only. The illustrations below show how to install the surround speaker (L). Note Spread a cloth on the floor to avoid damaging the floor. Tip You can use the speaker without the speaker stand by installing it on
ページ11に含まれる内容の要旨
Getting Started – BASIC – 3 Pull the speaker cord out to a straight length of about 700 mm (28 inch). Fold back about 100 mm (4 inch) and twist together. About 100 mm (4 inch) 4 Draw the IR receiver cord first, and then the speaker cord through the hole on the base. Stand the speaker up, and untwist and straighten out the speaker cord. Untwist and straighten out the speaker cord. Bottom of the base IR receiver cord , Speaker cord 5 Secure the pedestal to the post with the screws. Screws with w
ページ12に含まれる内容の要旨
6 Connect the IR receiver cord to the speaker and run the cord around the pin. 7 Connect the speaker cords to the speaker. Then run the cords through the slots (A, B, C, and D) all the way. A B C D US 12 Getting Started – BASIC –
ページ13に含まれる内容の要旨
Getting Started – BASIC – 8 Slide the speaker down slowly onto the pedestal. Adjust the length of the speaker cord (and the IR receiver cord). Note Do not catch the speaker cord (and the IR receiver cord) between the speaker and the pedestal. Do not drop the speaker when mounting. 9 Secure the speaker with the screws in order 1 to 2. 1 2 Screws with washer (short) (2) (supplied) Installing the surround amplifier (speaker base) You can put on the surround speaker (L) to the surround amplifie
ページ14に含まれる内容の要旨
1 Attach the spacers. Spacers (4) (supplied) Guide pins (2) (supplied) Push open the cover (surround amplifier only). 2 Attach the surround amplifier (speaker base) to the surround speaker with the guide pins. Rear of surround speaker 3 Secure the surround amplifier (speaker base) with the screws to the circle marked holes. Run cords through the slot. Screws (4) (supplied) US 14 Getting Started – BASIC –
ページ15に含まれる内容の要旨
Getting Started – BASIC – 4 Connect the speaker cords and the IR receiver cord to the surround amplifier. From surround speaker (R). From surround speaker (L). 5 Bundle the cords into the storage space. Stand the speaker up. The speaker base has storage space in the back. , Attach the cover (surround amplifier only). Storage space US 15 SPEAKER SS-TS56W SUR L SUR R
ページ16に含まれる内容の要旨
Step 2: Connecting the System and TV This hookup is the basic connection of the system to the speakers and TV. For other TV connections, see page 27. For other component connection, see page 31. To accept progressive signals, see page 29. Refer to the connection diagram below, and read the additional information from 1 to 4 on the following pages. Front speaker (R) Front speaker (L) Center speaker AM loop antenna (aerial) TV/VCR2 COMPONENT VIDEO IN DIGITAL IN RL AUDIO IN VIDEO IN YPB/CB PR/CR
ページ17に含まれる内容の要旨
Getting Started – BASIC – 1 Connecting the Speakers Required cords The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected. Color tube (+) (–) Note Do not catch the speaker cord insulation in the SPEAKER jack. To avoid short-circuiting the speakers Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not
ページ18に含まれる内容の要旨
AM Tip When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the “Dolby Pro Logic,” “Dolby Pro Logic II MOVIE,” or “Dolby Pro Logic II MUSIC” sound field (page 37). 3 Connecting the Antenna (Aerial) To connect the AM antenna (aerial) Plastic stand (supplied) Antenna (aerial) The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle or roll up the antenna (aerial). 1 Remove only the loop part from the
ページ19に含まれる内容の要旨
Getting Started – BASIC – To connect the FM wire antenna (aerial) Connect the FM wire antenna (aerial) to the COAXIAL FM 75 Ω jack. FM wire antenna (aerial) FM wire antenna (aerial) (supplied) (supplied) or COAXIAL FM 75 Ω jack COAXIAL FM 75 Ω jack Note Be sure to fully extend the FM wire antenna (aerial). After connecting the FM wire antenna (aerial), keep it as horizontal as possible. Tip If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the system to an
ページ20に含まれる内容の要旨
Side view Step 3: Positioning the Infrared signal System 10 10 Positioning the speakers Approx. 10m IR transmitter (33 ft) For the best possible surround sound, all the IR receiver speakers other than the subwoofer should be the same distance from the listening position (A). The front speakers can be placed from 0.0 to 7.0 meters (0 to 23 ft) (A) from the listening position. Surround speaker (L) Install the IR transmitter and IR receiver of the Note surround speaker (L) in direct line with
