ページ10に含まれる内容の要旨
Step 1: Connecting the System and TV The following is the basic connection of the unit to the speakers and TV. For other TV connections, see page 20. For other component connection, see page 24. To accept progressive signals, see page 22. Refer to the connection diagram below, and read the additional information from 1 to 4 on the following pages. Front speaker (R) Front speaker (L) Center speaker AM loop antenna (aerial) SPEAKER COAXIAL FRONT R FRONT L SUR R SUR L AM FM75 RL AUDIO IN TV / V
ページ11に含まれる内容の要旨
Getting Started – BASIC – 1 Connecting the Speakers Required cords The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected. Color tube To the SPEAKER jack (+) (–) Note � Do not catch the speaker cord insulation in the SPEAKER jack. To avoid short-circuiting the speakers Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each s
ページ12に含まれる内容の要旨
2 Connecting the TV Required cords A Video cord . Yellow B Audio cord (not supplied) White (L/audio) Red (R/audio) Tip � When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the “Dolby Pro Logic,” “Dolby Pro Logic II MOVIE,” or “Dolby Pro Logic II MUSIC” sound field (page 30). 3 Connecting the Antenna (Aerial) To connect the AM loop antenna (aerial) The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not disman
ページ13に含まれる内容の要旨
Getting Started – BASIC – To connect the FM wire antenna (aerial) Connect the FM wire antenna (aerial) to the COAXIAL FM 75 Ω jack. FM wire antenna (aerial) FM wire antenna (aerial) (supplied) (supplied) or COAXIAL FM 75 Ω jack COAXIAL FM 75 Ω jack Note � Be sure to fully extend the FM wire antenna (aerial). � After connecting the FM wire antenna (aerial), keep it as horizontal as possible. Tip � If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an
ページ14に含まれる内容の要旨
Tip Step 2: Positioning the � When you change the positions of the speakers, it is recommended that you change the settings. For System details, see “Getting Optimal Surround Sound for a Room” (page 62) and “Calibrating the Appropriate Settings Automatically” (page 64). Positioning the speakers For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A). However, this system allows you to place the
ページ15に含まれる内容の要旨
Getting Started – BASIC – LANGUAGE SETUP Step 3: Performing the OSD: ENGLISH MENU: ENGLISH FRENCH Quick Setup AUDIO: SPANISH SUBTITLE: PORTUGUESE Follow the steps below to make the minimum number of basic adjustments for using the system. 5 Press X/x to select a language. "/1 The system displays the menu and subtitles in the selected language. 6 Press . The Setup Display for selecting the aspect ratio of the TV to be connected appears. SCREEN SETUP 16:9 TV TYPE: YCBCR/RGB (HDMI): 16:9 C/X/x
ページ16に含まれる内容の要旨
10Press . Note � Loud test sound is output when [AUTO 11 Connect the calibration mic to the CALIBRATION] starts. You cannot turn the A.CAL MIC jack on the front panel and volume down. Give consideration to children press X/x to select [YES]. and neighbor. Set up the calibration mic at the ear level � Avoid being in the measurement area and using a tripod, etc. (not supplied). The front making noise during the measurement (which of each speaker should face the calibration takes about 3
ページ17に含まれる内容の要旨
Getting Started – BASIC – To recall the Quick Setup display 1 Press DISPLAY when the system is in stop mode. The Control Menu display appears. 2 Press X/x to select [SETUP], then press . The options for [SETUP] appear. 1 2 ( 2 7 ) 1 8 ( 3 4 ) DVD VIDEO T 0 : 0 0 : 0 2 QUICK QUICK CUSTOM RESET BNR 3 Press X/x to select [QUICK], then press . The Quick Setup display appears. US 17
ページ18に含まれる内容の要旨
Setting the demonstration Getting Started – ADVANCED – mode to on/off 1 Press SYSTEM MENU. Turning off the 2 Press X/x repeatedly until “DEMO” Demonstration appears in the front panel display, then press or c. 3 Press X/x to select a setting. "/1 The default setting is underlined. � “DEMO ON”: sets the demonstration mode to on. � “DEMO OFF”: sets the demonstration mode to off. 4 Press . SYSTEM The setting is made. MENU 5 Press SYSTEM MENU. X/x/c, The system menu turns off. After connect
ページ19に含まれる内容の要旨
Getting Started – ADVANCED – For the other speakers Installing the Speakers on a Wall You can use the speakers by installing on the wall. 6 to 9 mm 1 3 ( / to / inch) Installing the speakers on a 4 8 wall 1 Prepare screws (not supplied) that are 3 Hang the speakers on the screws. suitable for the hole on the back of each speaker. See the illustrations 4.6 mm 3 below. ( / inch) 16 10 mm 13 5 ( / inch) 4 mm ( / inch) 32 32 3 30 mm (1 / inches) 16 Hole on the back of 4.6 mm the speaker 3 (
ページ20に含まれる内容の要旨
Connecting the TV (Advanced) Sends the played back DVD image to the connected TV. Check the jacks of your TV, and choose connection method A, B, C, or D. Picture quality improves in order from A (standard) to D (HDMI). TV with HDMI* IN jack D IN To HDMI* OUT To VIDEO SPEAKER COAXIAL FRONT R FRONT L SUR R SUR L AM FM75 RL AUDIO IN TV / VIDEO SPEAKER VIDEO CENTER WOOFER (DVD ONLY) OUT S VIDEO (DVD ONLY) (DVD ONLY) YPB/CB PR/CR COMPONENT VIDEO OUT MONITOR OUT To To COMPONENT S VIDEO VIDEO OUT
ページ1に含まれる内容の要旨
2-895-967-13(1)
DVD Home Theatre
System
Operating Instructions
DAV-HDZ235
©2007 Sony Corporation
ページ2に含まれる内容の要旨
WARNING WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to To reduce the risk of fire or electric Part 15 of the FCC Rules. These limits are designed to shock, do not expose this apparatus to provide reasonable protection against harmful rain or moisture. interference in a residential installation. This equipment generates, uses, and can radiate radio Caution – The use of optical instruments frequency energy and, if not in
ページ3に含まれる内容の要旨
11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
ページ4に含まれる内容の要旨
Table of Contents Welcome!................................................3 Playing in Random Order..................... 37 About This Manual .................................6 (Shuffle Play) This System Can Play the Following Playing Repeatedly............................... 38 Discs .................................................6 (Repeat Play) Using the DVD’s Menu........................ 39 Getting Started – BASIC – Changing the Sound ............................. 39 Step 1: Connecting the
ページ5に含まれる内容の要旨
Advanced Settings and Adjustments Locking Discs .......................................59 (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) Getting Optimal Surround Sound for a Room ..............................................62 (SPEAKER FORMATION) Calibrating the Appropriate Settings Automatically .................................64 (AUTO CALIBRATION) Using the Setup Display........................66 Setting the Display or Sound Track Language ........................................68 [LANGU
ページ6に含まれる内容の要旨
About This Manual This System Can Play the Following Discs � The instructions in this manual describe the controls on the remote. You can also use the controls on the unit if they have the same or Format of Disc logo similar names as those on the remote. discs � The Control Menu items may vary depending DVD VIDEO on the area. � “DVD” may be used as a general term for DVD VIDEOs, DVD+RWs/DVD+Rs, and DVD-RW/ DVD-RWs/DVD-Rs. DVD-R � Measurements are expressed in feet (ft) for North America
ページ7に含まれる内容の要旨
The system can play DVD-ROMs/DVD+RWs/ Music discs encoded with DVD-RWs/DVD+Rs/DVD-Rs recorded in the copyright protection following formats: technologies – MP3 audio tracks and JPEG image files of This product is designed to play back discs that format conforming to UDF (Universal Disc conform to the Compact Disc (CD) standard. Format) Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that Example of discs
ページ8に含まれる内容の要旨
Region code Your system has a region code printed on the rear of the unit and will only play DVDs labeled with the same region code. ALL DVD VIDEOs labeled will also play on this system. If you try to play any other DVD VIDEO, the message [Playback prohibited by area limitations.] will appear on the TV screen. Depending on the DVD VIDEO, no region code indication may be given even though playing the DVD VIDEO is prohibited by area restrictions. Note about playback operations of DVDs an
ページ9に含まれる内容の要旨
Getting Started – BASIC – Getting Started – BASIC – See Unpacking in Specifications, page 81. Inserting batteries into the remote You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. To use the remote, point it at the remote sensor on the unit. Note � Do not leave the remote in an extremely hot or humid place. � Do not use a new battery with an old one. � Do not drop any f
