ページ1に含まれる内容の要旨
Quick Setup Guide
TeraStation Pro
Package Contents:
Main Unit (TeraStation)
Ethernet Cable
Power Cable
TeraNavigator Installation CD
Quick Setup Guide (this manual)
Warranty Card
v1.2
www.buffalotech.com
ページ2に含まれる内容の要旨
Step 1: Connect your Cables Plug TeraStation’s power cord and Ethernet cable into the back of the TeraStation. Connect the power plug to a power outlet. Plug the other end of the Ethernet cable into a hub, switch, or router on the network. Press the power button on the front panel to turn your TeraStation on.
ページ3に含まれる内容の要旨
Step : Check your Connection Check the LINK/ACT LED on the front of the TeraStation. If it’s lit, then your TeraStation is connected to your network. Please turn to page 4 to continue setup. If the LINK/ACT LED on the front of TeraStation is not lit, your TeraStation is not properly connected to your network. Make sure that: • both TeraStation and the hub, switch, or PC are powered on, • the Ethernet cable is securely fastened to both devices, and • the Ethernet cable is not damaged
ページ4に含まれる内容の要旨
Step : Using the Client Utility Insert the TeraNavigator CD into a PC’s CD-ROM drive. If Setup doesn’t launch automatically, you can launch it manually by clicking Start, then Run.... When the Run dialog opens, type d:\setup.exe (where “d” is the drive letter of the CD-ROM drive). Press OK to continue. TeraNavigator should now be running. Press the Install Client Utility button, and then press the Start button. Once the installation has completed, press the Launch button
ページ5に含まれる内容の要旨
Step 4: TeraStation Configuration Utility This login prompt will appear. The user name is admin. The password is password, until you change it. Press OK when finished. You’re now logged in. Bookmark this page in your browser for easy future access. For detailed explanations of each menu and setting, refer to your TeraStation manual, available on your TeraNavigator CD. Click on the Basic button on the left side. Here on the Basic page, begin by changing the name of your TeraSta
ページ6に含まれる内容の要旨
Step : Map a Driveletter to your Share To access your TeraStation’s data, it’s convenient to map your TeraStation to a drive letter. Begin by clicking Start and then Run.... In the dialog box, type \\TeraStation_Name where TeraStation_Name is the friendly, easy- to-remember name that you entered into the TeraStation Hostname field on page 5. Press OK to continue. TeraStation’s root directory will appear. You’ll see all of the configured shared folders, including share, the prec
ページ7に含まれる内容の要旨
Congratulations! Your TeraStation is set up. Please see the TeraStation User Manual for more help and configuration options. Note on RAID arrays: TeraStation uses RAID (“Redundant Array of Independent Disks”) technology to control the four hard drives in your TeraStation. RAID may be configured several ways: RAID Spanning - All four drives are combined into one large drive, giving the maximum capacity for your TeraStation. RAID Spanning is efficient, but has no redundancy. If one ha
ページ8に含まれる内容の要旨
Technical Specifications LAN Standards: IEEE 802.3u 100BASE-TX; IEEE 802.3 10BASE-T Transmission: 1000/100Mbps/10 Mbps, 1000BASE-T: 8B1Q4, PAM5, X 4B/5B, MLT-3; 10BASE-T Manchester Coding Access Media: CSMA/CD Media Interface: RJ-45 USB Standard: USB 2.0 Hi-Speed (HS) Full-Speed (FS) Low-Speed (LS) USB Connector: USB A Connector (2) Data Transmission Speed: Max: 480 Mbps (HS Mode) Max: 12 Mbps (FS Mode) Electric Current: 120V A/C Power Consumption: ~17W (Varies based on size) Dimensions
ページ9に含まれる内容の要旨
http://www.buffalotech.com USA/Canada Technical Support is available 24 hours a day, 7 days a week Toll-Free: 866-752-6210 email: info@buffalotech.com Europe Technical Support is available between 9am-6pm (Monday-Thursday) (GMT) and 9am-4:30pm on Fridays. email: helpdesk@buffalo-technology.ie ©2005, Buffalo Technology (USA), Inc.
