ページ1に含まれる内容の要旨
3-298-611-11(1)
DVD Home Theatre
System
Operating Instructions
DAV-DZ360WA
©2008 Sony Corporation
ページ2に含まれる内容の要旨
disposed of correctly, you will help prevent potential negative consequences for the environment and human WARNING health, which could otherwise be caused by inappropriate waste handling of this product. The To reduce the risk of fire or electric recycling of materials will help to conserve natural shock, do not expose this apparatus to resources. For more detailed information about rain or moisture. recycling of this product, please contact your local Civic Office, your household waste
ページ3に含まれる内容の要旨
Precautions About This Operating On power sources � AC power cord (mains lead) must be changed only at Instructions the qualified service shop. � The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall � The instructions in this Operating Instructions outlet (mains), even if the unit itself has been turned describe the controls on the remote. You can off. also use the controls on the unit if they have the � Install this system so that the AC pow
ページ4に含まれる内容の要旨
Table of Contents About This Operating Instructions..........3 Other Operations About the S-AIR function.......................3 Getting Optimal Surround Sound for a Playable Discs.........................................5 Room .............................................. 76 Getting Started Calibrating the Appropriate Settings Automatically................................. 77 Step 1: Positioning the System ...10 Controlling the TV with the Supplied Step 2: Connecting the System...13 Remote
ページ5に含まれる内容の要旨
Playable Discs Type Disc logo Characteristics Icon DVD VIDEO � DVD VIDEO � DVD-R/DVD-RW in DVD VIDEO format or video mode � DVD+R/DVD+RW in DVD VIDEO format VR (Video � DVD-R/DVD-RW in VR (Video Recording) mode Recording) mode (except for DVD-R DL) Super Audio CD � Super Audio CD VIDEO CD � VIDEO CD (Ver. 1.1 and 2.0 discs) � Super VCD � CD-R/CD-RW/CD-ROM in video CD format or Super VCD format CD � Audio CD � CD-R/CD-RW in audio CD format DATA CD – � CD-R/CD-RW/CD-ROM in DATA C
ページ6に含まれる内容の要旨
2) JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association (JEITA).) ® 3) DivX is a video file compression technology, developed by DivX, Inc. 4) DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. 5) A logical format of files and folders on CD-ROMs, defined by ISO (International Orga
ページ7に含まれる内容の要旨
About Multi Session CD � This system can play a Multi Session CD when an MP3 file is contained in the first session. Any subsequent MP3 files recorded in later sessions can also be played back. � This system can play a Multi Session CD when a JPEG image file is contained in the first session. Any subsequent JPEG image files recorded in later sessions can also be played back. � If MP3 files and JPEG image files in music CD format or video CD format are recorded in the first session, only the
ページ8に含まれる内容の要旨
Getting Started Unpacking � Front speakers (2) and � Speaker cords (6, red/white/ � Operating Instructions surround speakers (2) green/gray/blue/purple) � Speaker and TV connections (card) � S-AIR receiver (AIR-SA10) (1) � Remote commander (remote) (1) � Center speaker (1) � R6 (size AA) batteries (2) � Wireless transceiver for the � Subwoofer (1) S-AIR receiver (AIR-SA10) (1) � Calibration mic (1) � Operating Instructions of the S-AIR receiver (AIR-SA10) � AM loop antenna (aerial) (1) � F
ページ9に含まれる内容の要旨
Getting Started Inserting batteries into the remote Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment. To use the remote, point it at the remote sensor on the unit. Note � Do not leave the remote in an extremely hot or humid place. � Do not use a new battery with an old one. � Do not drop any foreign object into the remote casing, particularly when replacing the batteries. � Do not expose the remote sensor to dire
ページ10に含まれる内容の要旨
Step 1: Positioning the System For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A). However, this system allows you to place the center speaker up to 1.6 meters (5 ft) closer (B) and the surround speakers up to 5.0 meters (16 ft) closer (C) to the front speakers. The front speakers can be placed from 1.0 to 7.0 meters (3 to 23 ft) (A) from the listening position. Place the system as illustrated be
ページ11に含まれる内容の要旨
Getting Started To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Color tube Front speaker (L): White Front speaker (R): Red Center speaker: Green Surround speaker (L): Blue Surround speaker (R): Gray 1 Prepare screws (not supplied) that are suitable for the
ページ12に含まれる内容の要旨
Note � Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. � Contact a screw shop or installer regarding the wall material or screws to be used. � Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natu
ページ13に含まれる内容の要旨
Getting Started Step 2: Connecting the System See the connection diagram below, and read the additional information from 1 to 6 on the following pages. Note � Be sure to make connections securely to avoid hum and noise. � When you connect another component with a volume control, turn up the volume of the other components to a level where sound is not distorted. 3 DIGITAL MEDIA PORT adapter 3 Portable audio source 2 TV 4 AM loop antenna (aerial) 5 Wireless transceiver 4 FM wire antenna (aeria
ページ14に含まれる内容の要旨
1 Connecting the Speakers The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation in the speaker terminals. Rear of speaker Color tube (+) (–) Connector When connecting to the unit, insert the connector until it clicks. Rear p
ページ15に含まれる内容の要旨
Getting Started 2 Connecting the TV For video output to your TV, check the video input jacks of the TV, and select connection method A or B. Picture quality improves in order from A (standard) to B (HDMI). When the TV has the digital optical or coaxial output jack, you can improve sound quality by connecting with the digital cord (A). Digital optical cord (not supplied) Digital coaxial cord (not supplied) or To the digital coaxial output jack of the TV To the digital optical output jack of A
ページ16に含まれる内容の要旨
3 Connecting the other components You can enjoy the connected component using the six speakers of the system. � Portable audio source: A � DIGITAL MEDIA PORT adapter: B Stereo mini-plug cord (not supplied) To the portable audio source Front panel (USB) port (See page 61.) ANTENNA SPEAKER Rear panel FRONT R FRONT L SUR R SUR L COAXIAL 75 FM AM SPEAKER EZW-RT10 DIGITAL IN EURO AV CENTER SUBWOOFER DC5V COAXIAL OPTICAL 0.7A MAX TV HDMI OUT DMPORT OUTPUT(TO TV) DIGITAL MEDIA PORT adapter (not suppl
ページ17に含まれる内容の要旨
Getting Started If your TV has multiple audio/video inputs You can enjoy the sound with the speakers of the system through the connected TV. Connect the components as follows. VCR, digital satellite receiver TV or PlayStation, etc. VCR, digital satellite receiver or PlayStation, etc. System :Signal flow Select the component on the TV. For details, refer to the operating instructions of the TV. If the TV does not have multiple audio/video inputs, a switcher will be necessary to receive the sou
ページ18に含まれる内容の要旨
4 Connecting the antenna (aerial) AM loop antenna (aerial) (supplied) A B Note � Cord (A) or cord (B) can be connected to either terminal. ANTENNA SPEAKER Rear panel FRONT R FRONT L SUR R SUR L COAXIAL 75 FM AM SPEAKER EZW-RT10 DIGITAL IN EURO AV CENTER SUBWOOFER DC5V COAXIAL OPTICAL 0.7A MAX OUTPUT(TO TV) TV HDMI OUT DMPORT FM wire antenna (aerial) (supplied) or Note � Keep the AM loop antenna (aerial) and cord away from the system or other AV components, as noise may result. � Be sure to fully
ページ19に含まれる内容の要旨
Getting Started 5 Inserting the wireless transceiver You can transmit sound from the unit to an S-AIR product, such as a surround amplifier or S-AIR receiver. An S-AIR product is a component that is compatible with the S-AIR function. To use the S-AIR function, you need to insert the wireless transceivers into the unit, surround amplifier, and S-AIR receiver. For details of the S-AIR function, see “Using an S-AIR Product” (page 71). Rear panel of the unit ANTENNA SPEAKER Note FRONT R FRONT L S
ページ20に含まれる内容の要旨
6 Connecting the AC power cords (mains leads) Before connecting the AC power cord (mains lead) of the unit to a wall outlet (mains), connect all the speakers to the unit. Rear panel ANTENNA SPEAKER FRONT R FRONT L SUR R SUR L COAXIAL 75 FM AM SPEAKER EZW-RT10 DIGITAL IN EURO AV CENTER SUBWOOFER DC5V COAXIAL OPTICAL 0.7A MAX TV HDMI OUT DMPORT OUTPUT(TO TV) To the wall outlet (mains) Also, connect the AC power cord (mains lead) of the S-AIR receiver to a wall outlet (mains). About the demonstrat
