ページ1に含まれる内容の要旨
RM470A-R3 RM475
RM399 RM476
RF207 RM3055
ServShield
Protect your equipment from dust, dirt,
®
BL A CK BOX
and moisture with ServShield.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Support
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Information
Web site: www.blackbox.com • E-mail: info@blackbox.com
ページ2に含まれる内容の要旨
Trademarks Used in this Manual Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. PLEXIGLAS is a registered trademark of Rohm & Haas Company. UL is a registered trademark of Underwriters Laboratories, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support
ページ3に含まれる内容の要旨
FCC and RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of F
ページ4に含まれる内容の要旨
NOM Statement Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. Todas las instrucciones de operación y uso deben ser seguidas. 5. E l aparato
ページ5に含まれる内容の要旨
Table of Contents Preface .................................................................................................................................................................6 Safety Symbols Used in This Manual ............................................................................................................................................6 Safety Considerations .............................................................................................................
ページ6に含まれる内容の要旨
Preface/Safety Symbols Used in This Manual Preface This manual is provided to prevent service personnel from committing an act that results in the risk of fire, electric shock, or injury to persons. Only trained service personnel should receive, unpack, and assemble the ServShield Enclosure. In addition, only trained service personnel should install equipment in enclosures. Safety Symbols Used in this Manual This manual provides general safety guidelines to be observed during installation, ope
ページ7に含まれる内容の要旨
Chapter 1: Specifications 1. Specifications 1.1 ServShield Capacity — Cabinet: 600 lb. (272 kg); Vented Stationary Shelf: 150 lb. (68 kg) ® Certifications — ServShield: UL Listed; ® Fan Unit: UL E191535 Construction — Body: 18-gauge steel; Doors: 18-gauge steel; Rails: 14-gauge steel 19" EIA Rails — Mounting type: M6; Mounting height: Top rails: 14U; Bottom rails: 17U front, 23U rear; Rail depth: Top rails: 4.5" (11.4 cm) minimum, 33" (83.8 cm) maximum; Bottom ra
ページ8に含まれる内容の要旨
Chapter 1: Specifications 1.4 ServShield Size Front view 19" EIA M6 mounting rails 25.75" opening 17.876" opening 18.312" centers 19" EIA M6 31" mounting rails opening 17.876" opening 18.312" centers 30" Figure 1-1. Front dimensions. NOTE: The front door has been removed for clarity. Page 8 724-746-5500 | blackbox.com
ページ9に含まれる内容の要旨
Chapter 1: Specifications Side view 72" 36" Figure 1-2. Side dimensions. NOTE: The side panel has been removed for clarity. 724-746-5500 | blackbox.com Page 9
ページ10に含まれる内容の要旨
Chapter 2: Overview 2. Overview 2.1 Introduction ServShield protects your computer hardware in manufacturing environments and other industrial areas subject to harsh conditions. The cabinet is constructed of steel and it holds 600 pounds (272 kg) of equipment. The cabinet is preassembled, so it’s easy to ® set up and use. Cabinet components include: upper, clear PLEXIGLAS door; isolated, steel middle keyboard drawer; steel, perforated lower front door with dust filter; steel rear door furnis
ページ11に含まれる内容の要旨
Chapter 3: Installation 3. Installation 3.1 Receiving, Unpacking, and Removing the ServShield Enclosure from the Pallet Inspect for damage and report any before receiving. For what‘s included in the package, refer to Section 2.2. Unpack the enclosure by carefully removing the corrugated carton and corners. Avoid damaging the enclosure when removing packaging. WARNING: Only trained service personnel should be used to remove the enclosure from the pallet. Also, be sure you have a sufficient nu
ページ12に含まれる内容の要旨
Chapter 3: Installation 3.4 Protective Grounding Protective grounding studs are provided along with grounding jumper wires that electrically bond the enclosure doors to the enclosure chassis. WARNING: To avoid injury to persons or loss of life, ground each enclosure individually to the dedicated branch circuit ground. 3.4.1 Connecting Main Protective Grounding Stud to the Dedicated Branch Circuit Ground Connect the dedicated branch circuit ground connector to the main protective grounding stud
ページ13に含まれる内容の要旨
Chapter 4: Operation 4. Operation 4.1 Leveling the Cabinet ServShield cabinets are shipped with both casters and leveling glides for your convenience. Two casters have brakes that you can activate by turning the brake level on the side of the wheel. You can lower the leveling legs by turning the leveling glide to the 3 proper height using a ⁄4" open-ended wrench. 4.2 Removing the Doors The top and bottom front locking doors and the rear locking door are removable. To remove a door, open the do
ページ14に含まれる内容の要旨
• Chapter 4: Operation Fan Assembly • Fan Grill (3) (RF207) Rear Door Fan Filter Cover 3 #8-32 x ⁄4" self-drilling and tapping screws (12) Figure 4-1. Replacing a Rear Door Fan Filter. 4.4 Front Door Filter (RM476) You can easily remove the filter on the front door to clean or replace it. The part number for the front door filter is RM476. To remove the filter, remove the two wing nuts on the top of the filter, swing the filter bracket down and remove the filter. See Figure 4-2. The life of t
ページ15に含まれる内容の要旨
Chapter 4: Operation Bottom Front Door Filter Filter Bracket Wing Nut Figure 4-2. Replacing the Front Door Filter. 724-746-5500 | blackbox.com Page 15
ページ16に含まれる内容の要旨
Chapter 4: Operation 4.5 Mounting Rails Two pairs of vertical M6 steel mounting rails in the top and bottom of the ServShield enclosure are used to mount equipment in the rack. The upper rails have 14U (24.5") of rack mounting space and the bottom rails have 17U (29.75") of rack mounting space in the front and 23U (40.25 cm) in the rear. M6 rails M6 rails Figure 4-3. Mounting Rails. Page 16 724-746-5500 | blackbox.com
ページ17に含まれる内容の要旨
Chapter 5: Service 5. Service The ServShield Enclosure should be repaired by personnel trained by Black Box, or returned to Black Box for repair or replacement. Contact Black Box Technical Support at 724-746-5500 or info@blackbox.com. 724-746-5500 | blackbox.com Page 17
ページ18に含まれる内容の要旨
NOTES Page 18 724-746-5500 | blackbox.com
ページ19に含まれる内容の要旨
NOTES 724-746-5500 | blackbox.com Page 19
ページ20に含まれる内容の要旨
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less. © Copyright 2011. Black Box Corporat
