ページ1に含まれる内容の要旨
XA20-XA25 and HF G30 Using Wi-Fi to Play Images and Movies
on a Computer
ページ2に含まれる内容の要旨
Using the Media Server function, you can wirelessly view your movies and photos from your computer or similar device. You will need an access point connected to your home network and software installed on your computer that can play back movies and photos on the media server. We recommend that you connect the computer to the access point using a LAN cable. Refer also to the instruction manuals for the computer, software and access point. CAUTION Using an unprotected Wi-Fi network c
ページ3に含まれる内容の要旨
3. Touch [ ]. 4. Drag your finger up or down bring [Wi-Fi] into the orange selection bar, and touch the button. 5. Touch [Media Server].
ページ4に含まれる内容の要旨
Step 2: Connect to an Access Point Using Wi-Fi Connect to an access point. If you have already completed the settings for connecting to an access point, proceed to Step 3: Playing Back Movies and Photos If an access point has not been registered, an access point registration message will be displayed. Touch [OK]. 1. Select the desired connection method. You can select from the following four connection methods. For more information on your access point, please refer to the
ページ5に含まれる内容の要旨
Simply press and hold the WPS button on your access point and then touch the [WPS: camcorders screen. This is the easiest connection method if you are using a WPS- Button]* compatible router. Access the access points configuration screen using your Web browser. The camcorder [WPS: PIN will give you a PIN code, which you will enter into the browser. You will need a WPS Code]* compatible router and a computer or other device connected to it. [Search for Following the camcorders onscre
ページ6に含まれる内容の要旨
: (Press to exit after entering the information.) : Text field : Letter/number keys : / (Switch between letters and numbers/special characters.) : Space key : Backspace (Delete the character to the cursors left.) : / / Caps Lock. When the numerical keyboard is displayed, [#%?] switches between set 1 and set 2 of special characters. : (Change the position of the cursor.) : Cancel REFERENCE The camcorder can connect to a Wi-Fi network using a wireless router (access point) and even
ページ7に含まれる内容の要旨
2-a-2. Within 2 minutes, touch [OK] on the camcorders screen. The camcorder will connect to the access point. You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress.
ページ8に含まれる内容の要旨
[Connected] will appear on the camcorder's screen and the connection will be established. Proceed to Step3: Playing Back Movies and Photos 2-b-1. [WPS: PIN Code] method From a computer or similar device connected to the access point, use the Web browser to open the routers WPS settings screen. After the 8-digit PIN code appears on the camcorders screen, enter it into your routers WPS settings screen. 2-b-2. Within 2 minutes, touch [OK] on the camcorders screen. The camcorder
ページ9に含まれる内容の要旨
You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress. [Connected] will appear on the camcorder's screen and the connection will be established. Proceed to Step3: Playing Back Movies and Photos
ページ10に含まれる内容の要旨
2-c-1.[Search for Access Points] method The camcorder will automatically detect access points in the vicinity. After you select the desired access point, you simply enter the password (encryption key) to connect the camcorder. To enter text for the various settings, use the virtual keyboard. 2-c-2. Check the access point setting information. Note the access points network name (SSID) and encryption key. 2-c-3. Select the desired access point The SSID of detected access points will be
ページ11に含まれる内容の要旨
In the [Encryption Key] field, enter the encryption key. Touch [OK]. 2-c-5. Touch [OK]. [Connected] will appear on the camcorder's screen and the connection will be established. Proceed to Step3: Playing Back Movies and Photos 2-d-1. Manual Setup Perform this procedure to manually configure the wireless connection settings. This may be necessary, for example, if your access points network name (SSID) cannot be detected due to the stealth function being enabled. Manual setup
ページ12に含まれる内容の要旨
2-d-2. Enter the SSID. Touch the [SSID] field. Enter the SSID and then touch [OK] > [Next]. 2-d-3. Select the Authentication/Encryption Method Touch the [Authentication/Encryption Method] field. 2-d-4. Touch the desired method. If you selected [OPEN WEP], the WEP index is 1.
ページ13に含まれる内容の要旨
2-d-5. Enter the [Encryption Key] In step 2-d-4., if you selected [OPEN NONE], entering the encryption key is not necessary. Touch the [Encryption Key] field, and then enter the encryption key. Touch [OK] > [Next]. 2-d-6. Select how to obtain the IP address. Touch [Automatic] or [Manual]. If you selected [Automatic], proceed to Step 2-d-12 2-d-7. Set the [IP Address] manually. Touch the [IP Address] field.
ページ14に含まれる内容の要旨
2-d-8. Touch [ ] / [ ] to change the value and then touch [OK]. Enter the following information using the procedure explained above for the IP Address. 2-d-9. Enter the Subnet Mask and touch [Next]. 2-d-10. Enter the Default Gateway and touch [Next]. 2-d-11. Enter the DNS Server information and touch [Next]. 2-d-12. Save the settings.
ページ15に含まれる内容の要旨
Touch [OK]. [Connected] will appear on the camcorder's screen and the connection will be established. Step 3: Playing Back Movies and Photos 1. Computer: Select your camcorders model number from the list of servers. 2. Computer: Select the folder for the desired memory card and play back the movies and photos.
ページ16に含まれる内容の要旨
3. Camcorder: Touch [End] > [OK] when finished. This concludes the procedure for using Wi-Fi to playback images and movies on a computer. IMPORTANT Observe the following precautions when transferring files. Failing to do so may interrupt the transfer and incomplete files may remain at the transfer destination. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. If the file transfer is interrupted, select [New files]
ページ17に含まれる内容の要旨
IMPORTANT When using the camcorders Wi-Fi functions, do not cover the Wi-Fi antenna with your hand or other object. Covering it may interfere with wireless signals. While using Wi-Fi functions other than remotely controlling the camcorder using the Wi-Fi Remote application, do not open the double memory card slot cover. Make sure the optional WM-V1 Wireless Microphone is not attached to the camcorder. Wi-Fi functions are not available when the microphone is attached. REFE
