ページ1に含まれる内容の要旨
OWNER’S MANUAL
To the Owner
Installation Instructions
Operating the Screen
Maintenance
MB/C-1101
TO THE INSTALLER: BE SURE TO LEAVE THIS MANUAL WITH THE OWNER .
ページ2に含まれる内容の要旨
Printed in U.S.A. ©2001 Stewart Filmscreen Corporation.
ページ3に含まれる内容の要旨
OWNER’S MANUAL Contents To The Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Preparing The Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Step 1. Hanging The Case . . . . . . . . . . . . . . . . . . . . . . . . . .5 Step 2. Electrical Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operating The Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Adjusting The Screen Extension .
ページ4に含まれる内容の要旨
Congratulations on your purchase of the finest optical viewing screen available anywhere in the world! Please take a moment to review this manual, it will help ensure you many years of trouble-free service from your new Stewart Filmscreen product. About your Model B/Model C Series Electriscreen Your Model B & Model C Electriscreens offer the most technologically advanced roller screens in the world. The maximum overall dimensions of the Model B screen image are 18’ high by 26’6” wid
ページ5に含まれる内容の要旨
Before proceeding with the installation of this screen, take time to thoroughly read and understand these installation and operation instructions. All electrical wiring installations must conform to local and national codes and should be performed by qualified service personnel. There are no user-serviceable parts contained within the unit. Preparation Specifications regarding the individual screen dimensions, weight, mounting type, and controls are provided by
ページ6に含まれる内容の要旨
Factory Advisory The factory advises against installing a concealed or recessed electrical projection screen permanently. You must be able to access and remove the unit should future service be necessary. Suggested solutions for removing the unit include: A removable ceiling cover plate under the mounting location. Access to the unit through an attic or overhead space. Unpacking Warning! Failure to remove the batten lock-down screws can result in permanent damage to the screen. 1. DO NOT
ページ7に含まれる内容の要旨
Professional mounting techniques should be adhered to. Stewart Filmscreen Corporation cannot be liable for substandard or faulty installations. Make sure that you mount the screen so that the electrical box is on the left side (audience left). Installing the unit The Model B & Model C Electriscreens are ready to install into the ceiling or soffit. A false ceiling is not intended to support the weight of a Model B & Model C Electriscreens. The screen can be bolted directly
ページ8に含まれる内容の要旨
!" Caution Professional techniques need to be adhered to when making any electrical connection. A qualified electrician should perform these procedures. Be sure to follow all standard safety procedures for installing electrical devices. Do not disassemble or alter the configuration of the motor or the unit's electrical connections. This may cause injury to you or damage to the product. The electrical connection should be made only to the type of power source indicated on t
ページ9に含まれる内容の要旨
Installing the low-voltage 3-button switch (standard) The Stewart Filmscreen low-voltage control allows the use of low-voltage wire to connect to the supplied 3-position 24V momentary wall switch. Preparing the connection Before making the electrical connections, you need: An available 120V AC constant power source A 4-conductor switch hook-up cable (4-conductor bell wire or category 5 cable is typically used for long runs) Making the connection Figure 2 illustrates the connections. 1. Remo
ページ10に含まれる内容の要旨
First time operation The first time you operate the screen, the protective paper will fall out as the screen unrolls. Once the screen is fully displayed, make sure that no packing paper remains on the screen roll. The screen can be damaged if loose paper remains. Use the 3-button switch or outboard switching network to control the screen. When you lower or retract the screen, it will stop at its preset limit. If an obstacle (such as a person or furniture) gets in the path o
ページ11に含まれる内容の要旨
#$" % Caution Improper adjustment of the limits can cause irreparable damage to the screen itself, resulting in voiding the factory warranty. The extension and retraction limits have been preset at the factory. In general, we advise you to avoid readjusting these limits. In some cases, to enable proper alignment of the displayed image on the screen, you may need to adjust the extension of the screen. If adjustment to the extension is necessary, carefully follow these in
ページ12に含まれる内容の要旨
Modifying the extension of the screen You can increase the extension of the screen up to 3" past the factory preset stop, or you can decrease the extension by approximately 4-6" from the factory preset stop. Do not attempt to modify the screen extension beyond these recommended amounts. The thumbwheels are located on the left side of the screen roller tube inside the case, as shown in Figure 3. Remove the cover of the case using a 7/16” hex head screwdriver. When finished, replace the cover. T
ページ13に含まれる内容の要旨
# With reasonable care, you may expect many years of trouble-free use of your Stewart projection screen. We encourage you to keep your screen clean. To protect your screen when it is not in use, store it in the fully retracted position. Avoid getting any foreign material on the screen, as cleaning may prove very difficult. It may not be possible to remove scratches, paint, ink, etc. General maintenance The screen surface on your Model B & Model C Electriscreens is delicate.
ページ14に含まれる内容の要旨
" Refer to the following guidelines if you encounter a difficulty in the operation of your Stewart Filmscreen. Problems related to electrical or motor function may require a qualified service person or electrician. Should you have a problem that is not addressed here, call the Stewart Filmscreen Corporation. Problem description Probable cause Action to take Screen won't operate. No 120V power available. Check to see if the circuit breaker has switched off. Reset if needed. Outboa
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
www.stewartfilm.com 1-800-762-4999 Fax (310) 326-6870
